When it comes to lubricants, you’ll find many out there that offer exceptional results. Some are cheap, others are expensive, a few are useless, but most of them are pretty decent. Yet, none of them are close to offering the unbeatable value both PB Blaster and WD-40 deliver.
However, we aren’t here to say how amazing these two lubricants are but instead, focus on their differences.
As many people tend to always expect a specific result from using either one, it’s common to find people hitting a wall when they find out these two provide entirely different results. So, it is essential to know what goes for before buying, so you don’t end up hitting that wall.
If you are someone looking for brake booster lubricant or just want to know more about these two – then this article will be beneficial.
PB Blaster
This lubricant, oil or penetrant is one of the most recommended in the market. It uses a high-performance formula that provides better results than 90% of other products in the market for the same or even higher price.
But it works for many things, so it is easily one of the most versatile & convenient products you can get to lubricate, clean, get rid of rust, and so on.
This product is based on a concentrated formula that comprises a non-evaporating lubricant and several other rust and corrosion removing ingredients. What it does is to bust or clean metallic objects completely. It also lubricates and helps to reach the hardest places.
Even the oldest products with the thickest layers of corrosion or rust will end up with a spotless surface. And of course, this formula still manages to leave a lubricating film behind after cleaning any metallic part or object.
This product mostly comes in a spray can, so it means you won’t have the precision straws to creep in difficult-to-reach places. But it passes into the smallest crevices to clean products from inside out so you can receive a top-notch performance for all types of machines.
How does PB Blaster Work?
Irons, metals and other similar materials tend to produce rust when oxygen and water start acting on them. Unless we’re talking about stainless steel, these chemical reactions tend to damage products and eventually make them useless. Luckily, rusting can always be slowed down and removed as long as you use the right product.
PB Blaster is that product. You can make it work on practically any corroded or rusted metal, including bolt, nuts, fused parts, and more.
By only spraying a little on the part that needs cleaning or maintenance and leaving it for several hours or overnight, you’ll be able to get rid of all impurities or unwanted damaging factors.
The thing about PB Blaster is that even when it doesn’t work the first time you can always use it a second time to get its great results, and even better than the first time. If parts don’t get loose or don’t trash away from the rust, you can add a little heat to accelerate the process.
As oil or lubricant that’s not flammable, it will work well enough with a heat gun or any similar product.
While it’s not flammable, though, it is important never to apply direct fire to any lubed product as it could eventually ignite. But thanks to how fast PB Blaster works, it is almost unnecessary to accelerate the process in any way.
It works in record time when compared to other similar lubricants, and thanks to its protecting and lubricating film, you can always expect this product to last a lifetime with no additional effort.
This layer that protects will change the chemical reaction of the surface of any metal, so you can eventually make it work correctly or disassemble with ease. It even works to make old machines work after an old time being idle.
The advantage of PB Blaster comes from its ability to prevent or reduce the damage from rusting. After spraying some, this protective layer will avoid any type of moisture from making contact with the metal. Eventually, this stops and slows down rusting exponentially, until the film wears out which can take years.
This layer comes from a co-polymer penetrant coating, which not only helps to decrease rusting effects but also to penetrate crevices and small holes while staying for long in them. So, you get not only the ability to get rid of rust and to prevent it but also to get to the hardest areas in metal products to lubricate and clean.
In short, PB Blaster works like the perfect lubricant to get rid of even the hardest rust or corrosion.
What Is PB Blaster For?
You can use PB Blaster for a wide array of operations, including industrial, marine, plumbing, automotive work, and more. Usually, PB Blaster works to ease up stripped and rust bolts, but you can use it for practically anything.
Thanks to its penetrating capacity and hugely effective formula, it will clean metal objects pretty quickly in a matter of hours. But most importantly, it will leave a lubricating and protective layer behind that will keep any tool, machine or material ready to work.
This is what you can use PB Blaster for:
- Car Parts
- Tools
- Machines
- Marine Application
- Sports Equipment
- Fishing Equipment
Disadvantages of PB Blaster
PB Blaster may be one of the most effective products when it comes to lubrication and cleaning rust & corrosion, yet it isn’t a perfect product in its entirety.
When it comes to drawbacks, we can find that it tends to generate too many fumes. This is not precisely a bad thing but an uncomfortable one.
It is recommended to wear goggles and a mask when using PB Blaster because these fumes may eventually enter your breathing track and reach your lungs, which could ultimately cause coughing or chemical side effects.
But this is the only problem this product has. You just need to use a breathing mask and use it in open spaces, and that’s it. With enough air circulation and ventilation plus the right protective gear, you can use PB Blaster without issues.
WD-40
Maybe the most famous multi-use lubricant in the market, WD-40 is also a hugely penetrating product that goes into the hardest places to protect against corrosion & rust plus getting rid of moisture in the process.
More than oil, WD-40 is actually water-based with a bio-solvent, ideal to not only get rid of unwanted metal impurities but also to protect in the most natural way possible. And it does it with a hugely powerful capacity that not many products offer.
It does almost everything you could expect from it. Easily and with rapid effects, it cuts through grease, grime, and other impurities fast. You can clean tools, automotive parts, floors, and appliances plus many other products in a matter of hours.
WD-40 also inhibits corrosion and increases overall protection from rust. It also gets rid of soil and dirt, penetrates outstandingly well and produces water displacement so you can prevent moisture-related problems in your tools or machines.
How Does WD-40 Work?
WD-40 has five different main uses, yet it works in a single way to keep your products protected, free of contaminants, and completely lubricated. Its penetration capacity alongside its moisture-displacing effects is what makes it so useful for a lubrication and protection product.
The good thing about WD-40 is that it doesn’t use any kind of damaging chemical including kerosene, graphite, chlorofluorocarbons, or silicone. However, it uses many other ingredients that provide a corrosion-resistant formula, perfect for increasing any metal or product lifespan by keeping corrosion factors away.
Another great ability of WD-40 is the loosening effects of parts that are frozen or stuck. You may also use it on frozen or rusted metal parts so you can make them work again or clean them from impurities.
And here’s where it removing capacity comes from, ideal for grime, grease, gunk and other similar contaminants that can stick to metal parts.
Some people even use it for removing adhesives, tape, and even labels. Other people may get excellent results when using it to reduce excessive bonding materials as well. When it comes to building or assembling products, for example, WD-40 can be a fantastic product to have.
However, it is the lubricating effects of WD-40 that make it so amazing. No matter how deep or difficult the surface of the product or metal part is, this high-quality lubrication effect will reach deep inside and disperse entirely.
It also holds firmly to the surface and protects against different factors such as rust, corrosion and more.
A remarkable capacity of WD-40 is the moisture-driving effect. If you want to dry out parts or systems where moisture or water can be damaging, WD-40 works wonders. You can actually use it for electrical or loose wiring systems where moisture is present, so you get rid of the water while preventing any issue.
If that’s not amazing, then nothing is.
What Is WD-40 For?
You can use this product for a thousand things. From lubricating to cleaning, preventing moisture and even loosening rusted & corroded metal parts, and much more – WD-40 is one of the most convenient and versatile products of its kind.
It is entirely safe in different materials too, including rubber, wood, metal, plastics, and others. Here’s a list of things with which WD-40 can be useful:
- Wheels
- Engines
- Bikes
- Tools
- Sports Equipment
- Floors
- Wooden Products
- Metal Products
Disadvantages of WD-40
While WD-40 is a fantastic product for lubricating and cleaning, it has a few downsides, especially when it comes to its formula.
Many people recommend avoiding using it in polycarbonate or polystyrene, as they could eventually produce fumes or similar side effects.
While it is not damaging to humans, it could harm other products such as car polishers, rubberized synthetics, and unsealed bearings. So, be careful when using this product around things like these.
Overall, however, WD-40 performs well and leaves nothing to be desired. Just need to be careful when using it, and that’s it.
PB Blaster vs. WD-40 – Which One is Better for a Brake Booster?
Both PB Blaster and WD-40 are excellent products that will make you forget of frozen and rusted products to deliver functional ones. But even though they are both strong & useful, one of them works slightly better than the other.
Here is where we say that while WD-40 is a first-rate penetrating oil that’s used for millions of people around the world, it is not as powerful as PB Blaster.
Yes, WD-40 has the advantage of coming in different designs such as the Protective White Lithium Grease, the Long Term Corrosion Inhibitor, the Rust Remover Soak, the Rust Release Penetrant Spray and the Water Resistant Silicone.
But PB Blaster with only three versions with the Penetrant, Multi-Purpose Lubricant, and Corrosion Stop will easily surpass the effects of the WD-40.
Both options offer additional options for more specific work, though. Yet, the general-use products for which they are known to go slightly to the side of PB Blaster when it comes to quality. However, this one is also a little more expensive which can be a downside in comparison.
If you want something economical and easy to use that will help you use rusted and corroded car parts again, WD-40 will work well enough for your needs. But if you need something strong that leaves a protective layer for years and penetrates even better – then PB Blaster is your best choice.
To conclude, hopefully, we have nourished your query with adequate information already. For further know-hows, drop your thought in the comments section.
Related Article:
>> Get Top Quality Softener For Home Uses
>> Tips To Chose Good Truck Camera For Dashboard
>> Get An Evaporative Cooler and Split AC For You Home
