How To Use A Farm Jack For Different Purposes

A farm jack is one of the most useful pieces of equipment for off-roaders and farmers. It is a versatile tool, often used in a variety of situations. Every farmer will find them helpful in removing fence posts.

On the other hand, off-roaders find the handyman jack a gem during repairs and winching, thanks to their extremely tall design.

Most recovery tools have stunningly sleek designs, incredibly easy to use, and almost 100% safe. Sorry, you can't say that about the farm jack.

They are annoyingly bulky, low-tech, and could land you to hospital with nasty injury in seconds. Yes, this piece of equipment is hazardous!

Does that scare you? It better not, because despite all that, there is no doubt that the handyman jack is the most versatile recovery device you will find in the market today. If you know how to use a farm jack, then it is an invaluable addition to your assortment of recovery tools.

Note: Here We Listed Our Top 10 Best Farm Jack

History Of The Farm Jack

The high-lift jack is not a new tool. The device was invented more than 100 years ago. Formerly known as the sheepherder's jack, this piece of equipment was a farm tool. With an increase in versatility and a little improvement to the design, its name changed to the "implement jack."

The last 20 or so years marked the most significant developmental phase in the history of the tool. Many users of the device propped up, so they came up with many names. Notable names are the Hi-lift, Jack-all, Jackall, Unijacck, Vaporjack, Railroad Jack And Handy Man Jack, to mention a few.

How A Farm Jack Works?

Jacks gradually lower or raise loads through the ratcheting system.

What are the parts of the farm jack?

It features an I-beam spine, a gear, a handle, a pin, and several holes along the I-beam. If you've had a chance to work a jack, then you’ll positively identify these parts.

There is a sliding mechanism. The sliding mechanism lowers or raises along the I-beam as you move the handle up and down.

Every upward or downward stroke on the handle alternates the pins one after the other as they move through the series of holes in the bar. One pin locks into a hole after every stroke of the handle to ensure that the load is secure, while the other one slides to the subsequent hole.

The farm jack is more like a walking ladder, with systematic holes instead of crossbars. One pin move from one hole up the next and the second pin follows in tow. A running gear helps to do all the work, while the I-beam acts as the ladder that the pins climb.

It is, however, essential to note that when lowering your load, the jack requires constant weight to go down smoothly. Without weight, the running gear instantly drops.

These devices can carry incredible tons of loads but it is always essential to monitor the capacity limit of your tool of choice. Overloading the machine does not break it. Instead, upon overload, a shear pin in the system gives way thereby freezing the jack. It is incredibly efficient.

How To Operate A Farm Jack In Different Ways

We are all in agreement that a farm jack is a versatile tool. It is useful in a range of situations. An essential factor that makes the Hi-Lift extremely valuable is its simple-to-use mechanism. It doesn't have any hydraulic that is susceptible to failure.

Again, this vital mechanically human-powered device does well with all vehicle sizes, thanks to their spectacularly lengthy design. It will do a remarkable job on small cars, SUVs, rock crawlers, and tractors.

Whether you intend to winch your truck, change a tire on your Jeep, or remove fence posts, you will find this piece of equipment invaluable. But only if you know how to operate a farm jack! 

Don’t worry, we’re here to help you with that.

1. How To Use A Farm Jack On A Truck Or Jeep

Just like we do, we know that there are several reasons for which you may need to raise your Jeep, truck, or tractor. More importantly, if you are a self-respecting off-roader, then you'll pack with you a shovel and a high-lift.

This step by step guide will help you know how to safely raise your Jeep, truck, tractor, or trailer.

Park Your Automobile

It is important to park your automobile correctly before you begin any work. Apply parking brakes appropriately or clamp the tires if possible. On the opposite end from where you intend to position your jack, chock the wheels. Use logs or pieces of rock if you have no chocks. The ideal procedure is to park on level ground. However, parking on level ground is rarely possible.

Protect Your Hands

Protect Your Hands

Before taking out your farm jack, slip on a pair of good quality working gloves. Most preferably, they should be leather gloves. High-Lifts are not only clunky but also heavy and dangerous. Again, you need to protect your hands as you'll be using force on the lever.

Set Up Your Farm Jack

Check your jack if it's working fine. Identify the jacking points on your vehicle and prepare the ground underneath.

Set this vital piece of equipment on a flat, stable surface. If you can, use your shovel to level the surface. Uneven surfaces will most probably throw your jack off balance. Moreover, the load is most likely to slip when the surface is rough. Use an off-road base or a block below the high lift to provide more stability.

Engage The Jack

After setting up your knob under the vehicle, turn the knob to allow the lift's moving portion to move up and down. Now, turn the knob in the opposite direction to engage the high-lift. You can now move the handle up and down to raise the jack.

Be Careful

Use both hands to work the handle up and down. At all times, keep your eyes on the jackall and the load. At the same time, you need to keep your face and body away from the Jack.

Lifting Directly At The Wheel

Yes, it's possible to lift your SUV directly at the wheel using a high-jack. However, you will have to use an accessory known as a Lift-Mate. The adaptor has a pair of hooks that grab the wheel. The other end slides to fit snugly on the nose of your lifting equipment.

2. How To Use A Farm Jack As A Winch

Are you stuck on crevices or mud? If you have the farm jack, then you certainly don't have to stay stranded for hours. A farm jack can help you move your truck or jeep for a short distance.

 You can get yourself out by doing the following-

Find A Place Of Anchorage.

Ground anchors may be available as aftermarket accessories. In case you don't have any, identify a stable tree a few meters away from your vehicle and use it as your anchor.

Make Attachments

Firmly wrap a strong webbing strop to the tree. Wrap it as low as possible for better anchorage and stability. Use a bow-shackle to bring together the ends of the strop. Using a smaller strong chain, connect the webbing strop to a conveniently smaller shackle attached on your jack.

Lay the jackall appropriately towards the vehicle you intend to tow and use another chain to connect the toe of the stuck vehicle.

Work The Handle

Before you begin winching, reverse the larch lever. Move the handle up and down until the winching mechanism moves the entire length of the I-beam. Secure your vehicle in the new position and readjust the chains.

Repeat this process until your automobile is completely out of the muddy or sandy area.

3. How To Use A Farm Jack To Remove Stumps, Bushes, Or Fence Posts

If you are a farm dweller and you have some unruly trees and bushes around your lawn or at your backyard, then you know how tiring digging up stumps can be. Why not try out your sheepherder's jack?

Get A Tripod Stand

There are special metallic tripods available for this purpose as aftermarket accessories that you can purchase. However, because they cost almost the same price as your farm jack, you can make one from wood.

Prepare Bush or Tree

It is dangerous to uproot tree stumps without preparing them for that purpose. Prepare them by trimming to leave them short and workable. Trim them low enough so that your tripod can stand over the stump. However, don't make it too low as you'll need to wrap a chain around it.

Pull Up

Before you do anything, tie a chain around the bush stump. Do it as low as possible. Using the lever, raise the jack arm. Once all the roots are loose, remove the high-jack from the tripod stand and anchor it on a stable tree or object. Pull the rest of it out as you'd use a jack for a winch.

Can A Farm Jack Be Dangerous?

Look, a High Lift is as dangerous as it is useful. The device has potential energy and capable of causing disaster any time when it has a load. It is even more dangerous when lowering the weight.

The only time the lift is safe is when it has a load, and the lever is up, and the handle perfectly parallels the supporting bar. So, when lowering your jack, it is crucial to hold on to the handle until the load is completely low.

Tips And Cautions To Take When Using A Farm Jack

As already stated, a high-jack is a dangerous tool, but that does not mean it is meant to you. If used correctly, there is a guarantee that you will not only accomplish the work but also finish it safely. The following tips are ideal for safe working-

  • Cleaning And Maintenance- Every tool needs maintenance for efficient usability. Ensure that your high-lift is clean and dry before and after the usage. Mud, dust, or dirt buildup compromise the efficiency of your appliance, leading to interrupted movement, jamming, or stiffness. If you saw you jack have any issue then follow this post for fixing.
  • Storage- Clean the piece of equipment thoroughly. In the case using liquid cleaners, allow the device to dry naturally before spraying with appropriate silicon lube. Finally, store the tool out of the weather to avoid corrosion.
  • Recovery Points- Stick to using designated jacking points if your bar-work has any. It guarantees a sturdy connection. Jacking plate steel or off tube create unstable connection increasing the likelihood of slipping.
  • Solid Base- Any doubts that the load may sink as you crank? Use a solid base-plate. They are not only stable but also help to spread the load evenly.
  • Use It For The Right Purpose- Most people use High-Lifts to hold or clamp objects. While it is true that a farm jack will hold or clamp the object for you, that is not the right purpose for the tool. Doing so, therefore, increases the likelihood of accidents. If you need to clamp, use it combined with a compatible top clamp.
  • F. Murphy's Law- Don't forget Murphy's Law! If anything has a chance of going wrong, it definitely will. Keep out of the way anything that you are not ready to bruise or injure. These mean your body parts, children, valuables, and equipment.

Final Words

Now that you know how to use a farm jack in various situations, you will wonder seeing how versatile the device is. Well, we have to admit that the high-lift is not a replacement for a winch, but is an incredible piece of invention.

The tool is not only ideal for changing tires but is also helpful when you need to tow your SUV over a short distance and lifting high-centered vehicles, among other uses. But while you gear towards getting the best out of this versatile tool, be mindful of your safety.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: