There is a number of buying factors that you need to consider papillary before getting the right pick in hand. Otherwise, it may end in a few wasted bucks. This article reviews them and propose a top10 selection
According to Kenneth Taylor, the 3 best cold air intakes for your chevy Silverado are the K&N Cold Air Intake Kit 77-3082KP, the K&N Cold Air Intake Kit 63-3082 and the K&N Cold Air Intake Kit 57-3058.
The soaring temperatures are driving you crazy? Not quite prepared to face the heat?
Well, you’re not alone.
With global warming and its consequent climate changes, there has been a lot of dry regions with less than 60% humidity level.
What can we do? Air conditioning is a big and costly thing to ask, right?
If air conditioning the entire home is not a feasible option for you, yet you want to have a constant flow of fresh and clean air into your home, opt for the best whole house evaporative cooler!
These home evaporative coolers are also known as swamp coolers. They keep your entire home cool and fresh if you’re living in a warm region with low humidity.
Not only are these evaporative coolers cheaper than air conditioning, they are also more environmentally friendly as they use less energy. What’s more – these are easy to install and won’t drive your electricity bill up the wall.
In this guide, we will take you through the top-notch whole-house evaporative cooler reviews, so that you know which one is the best suited for you. Read on and discover a whole new world of the cool living!
This Evaporative Cooler is ideal for cooling spaces at home, patio, or workplace for up to 950 square feet
The cooler is constructed out of robust Polypropylene.
It requires manual water fill.
The tank capacity is 10.3 gallons of water
It does not have the option of an ice chamber.
It can increase the humidity in the room
This Evaporative Cooler is equipped with a powerful fan with 3 speeds sand generates an airflow of 3,100 cubic feet per minute. It has got oscillating louvers to distribute the air evenly. The design is compact yet it is very powerful. The dimensions of the product are 24 x 16 x 38 inches and it weighs 39 Pounds.
The cooler allows for flexible water fill options depending on whether the cooler is used inside or outside near a garden hose.
It requires to be filled manually and has a tank capacity of 10.3 gallons of water. One tank full of water lasts for 4 hours of self-contained cooling. Using the garden hose hook-up with a float valve allows for continuous water fill.
It comes with 2 fan speeds and has a swing mode to reach more space to make your room cooler in a jiffy. The ASDS (Air Swing Delivery System) works without any noise, giving you peaceful moments to cool down in.
Armed with a 10.3 gallon water reservoir, its three-sided, high density, rigid media padding system ensures more intake of air and maximum cooling in the shortest time – 2,200 cfm. The rigid media pads require less maintenance and are more durable than their fiber counterpart.
They have 80% more evaporation capacity, leading to cooler temperatures. The specially designed wing-like prop works in tandem with the 3-sided pads to ensure lower static pressure as well as more efficient delivery of air.
Its four temperature settings can be easily controlled manually, giving you more options to set the perfect temperature, both indoors and outdoors. Although the manual switches are on the flimsy side, they work well to keep the indoor temperatures about ten degrees cooler than outside.
The Hessaire MC37M Cooler has four casters that make it easy to move it around. However, be careful when you install these casters as you may find them a bit too hard to push through.
If you’re too tired to refill the water reservoir, simply use the float valve to connect it to your garden hosepipe for a continuous supply of water. On a high setting, the machine is a water guzzler. But it works very well – a neat 8 hours without a refill – if set on low. The latch of the water refill part may be not too comfortable to open and close, so a word of caution here.
These cooling pads enable supercharged but economical cooling. The power rating of the cooler is 250 watts and it is constructed out of Polypropylene.
The Evaporative cooler has got a filter to clean the room air. It does not have the ice chamber option.
The cooler has got a proprietary fan propeller design with winglets for a powerful throw. Despite its powerful throw, the cooler works quietly and smoothly.
Compact size for easy portability.
Air Swing Delivery System for maximum space reach in minimum time.
Faster cooling process with 3-sided rigid media padding.
Four temperature setting options for customization.
A float valve to the hosepipe saves the hassle of refilling the water tank.
Environment friendly and free from chemicals.
Hessaire MC18M Portable Evaporative Cooler
This evaporative cooler is suitable for 500 square feet of space and delivers an airflow of 1,300 CFM.
The cooler’s body can bear exposure to sunlight.
It can operate for 3-4 hours with the tank filled.
Continuous operation is possible with the continuous fill mode
It is not suitable for areas larger than 500 square feet
It does not have an ice chamber option.
The airflow generated by the evaporative cooler is cubic feet per minute (CFM). The louvers in the cooler are manually adjustable to direct the airflow up or down.
The motor speed dial has got 5-speed settings; 2 cooling modes on Low and Hi speeds with the pump on and 2 pump-off, fan only modes with Hi and Low speeds. The unit is easy to operate.
The water reservoir capacity is 4.8 gallons. There is a water level indicator as well.
The mode of filling the water tank is manual. However, a continuous fill option is available which requires a bras float adapter (included) to be connected to a household hose.
The cooling pads allow it to provide efficient cooling for 500 square feet of space. A filled water tank enables operation for 3-4 hours.; Continuous operation is done through the continuous water tank filling option.
The equipment carries a one-year manufacturer’s warranty. The air filter ensures clean air in the room. It is recommended to run it in ‘fan only’ mode for 3o minutes every day to dry out the filter. The unit is available in Grey, Green, and Teal colors.
The cooler’s body has been injected with molded ABS with Ultra-violet additives to allow for direct exposure to sunlight.
The cooler has an airflow rate of 1,300 CFM.
It has got 5-speed settings.
The water reservoir capacity is 4.8 gallons.
The color has manual and continuous filling modes enabled
BREEZEWELL 3-IN-1 Portable Air Conditioner, Evaporative Air Cooler/Humidifier/Cooling w/ Ice Box
This is a 3 in 1 package with fan, humidification, and cooling all bundled into one package for people living in dry climates
The cooler operates very quietly.
It is equipped with a 360 degrees Swivel wheel.
The unit has got a remote controller as well.
It is not suitable for spaces larger than 500 square feet.
Some users find the instructions inadequate.
The evaporative cooler has got a powerful bladeless fan. The outer fan blades can be closed when the cooler is not in use to prevent dust penetration. The fan provides an airflow of 200-750 CFM for areas up to 250 square feet and from 751 to 2,000 CFM for areas up to 500 square feet. The air outlet has got a safety net design.
The product is made out of Plastic and the dimensions are 11 x 10 x 22 inches.
The cooler has got 2 visualized tanks of 1-gallon capacity. This allows for up to 8 hours of operation. When the tank is emptied, the cooler gives a beep.
This way, safety for the family and the product is ensured.
The cooling pads act as filters removing allergens from the air. The pads need to be cleaned at regular intervals along with the filters.
The cooler can be used in three different modes: cooling, fan, and humidification. It has a very quiet operation with a max dB level of 55 dB.
The product allows for 65° Oscillation and is equipped with a 360° Swivel Wheel. The air filter cleans the room’s air from allergens and protects the household. The cooler has two ice boxes for providing cooling.
It is also equipped with a remote control unit for convenience and ease of operations.
The cooler fan blades can be closed from outside.
The max airflow is 2,000 CFM.
The cooler has got dual visualized water tanks.
It has got 2 iceboxes.
Evaporative Cooler – 40-inch Portable Oscillating Tower Fan for Big Space
The portable evaporative cooler is designed for cooling areas up to 120 square feet
It is ideal for use in dry climates.
It performs a humidifying action as well.
It has got a 70 degree oscillating and 40-inch design.
It is not suitable for large areas.
The evaporative cooler has a fan capable enough of air circulation within a floor area of 120 square feet. It has the provision of both airing and cooling ass it has got icebox as well. The dimensions of the product are 40 x 8.4 x 7.3 inches and it is very lightweight at only 12.05 pounds.
The tower evaporative cooler has got both places for water and ice. It can act as a humidifier when only the water is filled. However, if the iceboxes already prepared in the refrigerator are placed in it, it gives a strong cooling effect in the room air as well.
Three fan speeds control the speed of the airflow in the room.
The evaporative cooler is equipped with a filter pad. It is used to clean the room air and deliver clean air all around.
It has also got a 10-min shut-off switch which is triggered upon the fan remaining idle. The tower fan is ultra-quiet and has got a very quiet and smooth operation.
The option of adding an icebox to the cooler makes it highly recommended for dry climates. Once the ice is placed inside, it throws cool air into the surroundings.
Thus, it is capable of the fan, cooling, and humidifying actions at an affordable cost.
This is a 70 degrees oscillating and 40-inch fan that has a modern design and fits all modern and contemporary home decors.
The cooler is designed for room space of 120 square feet.
The cooler has got a tower fan to circulate air.
The cooler is tall but lightweight.
The cooler can hold an ice box.
BREEZEWELL 2-in-1 Evaporative Air Cooler
The evaporative cooler with a bladeless fan design provides a cool airflow in the room with a gallon-sized water tank.
It provides therapeutic air in the room.
The cooler has got two ice packs.
The cooler has got a sleek design.
The cooler is not suitable for large areas.
It does not have filter options.
The fan used in this evaporative cooler has got a bladeless design. The cooler provides the ideal environment in the room for reading books, watching movies, etc. It can be controlled via a remote control unit from up to 20 feet away.
It is a portable cooler with an 8-hour timer.
The one-gallon water tank is removable for easy cleaning. It is very easy to fill the water tank. The addition of cold water to the water tank can make the cooler keep the room very cool.
The cooler delivers a stream of high-velocity, smooth and therapeutic air across the room.
Two Ice packs are delivered with the package to make the room air cool. The ice packs are refrigerated before use. On top of this cold water can be poured into the water tank. The cooler is ideal for use in living rooms, bedrooms, offices, etc.
The cooler provides a whisper-quiet operation. It is 40-degree oscillating as it has a swing pattern that throws air in a 40-degree radius. The oscillation and swing features used together enable the cooler to throw air in the room faster.
The sleek design of the cooler ensures minimum use of floor space.
The evaporative cooler can be controlled from 20 feet away.
It has got a removable one-gallon water tank.
The cooler provides high-velocity air.
The color throws air in a 40-degree radius
Luma Comfort EC110S Portable Evaporative Cooler
Would you believe that the Luma Comfort EC110S Portable Evaporative Cooler rolls three functions into one? It works as a fan, cooler, and a humidifier – all at the same time!
In addition, its portability means you can carry it around easily, everywhere you go!
Because of the natural cooling technology where hot air is passed through pads to be converted to cool air for your home, the cooler is 100% eco-friendly and 75% more energy-efficient than a conventional air conditioning system.
Its cyclonic cooling technology enables the cooler’s fan-head to oscillate in a perceptive way, sending beams of air around the room to make it cooler in the blink of an eye!
As with all other whole house evaporative coolers, this one is no exception in the sense that you can leave your door and window ajar and the cooling technology will ensure you always have a fresh breath of air inside your home.
If you want your indoor temperatures to be lower by 20 -30 degrees, then Luma Cooler is for you. However, be aware that the coolness in your room might not last as long as you want it to, making it a little expensive in the long run.
With a contemporary look and design, this evaporative cooler comes with three different cooling speeds and wind modes to help you keep the heat where it should be – outside.
The oscillating powers of this machine is enough to cover spaces up to 250 square feet. and is more suitable for smaller rooms.
The removable water tank of the product makes it very convenient to be easily refilled. You can rest assured of the fact that the water tank won’t need to be refilled for up to 8.5 hours if you set it to medium.
The product comes with a remote control and a digital display so that you can do away with manual controls and be more at ease.
Unlike some air conditioners, you won’t even notice that this is in the same room as you because it makes no sound, thanks to the whisper-quiet technology. So, finally you can be at peace in your surroundings without the heat getting the better of you!
Energy-efficient and natural cooling technology.
Cyclonic cooling technology for a cooler room.
Keeps inside temperatures down by 20 – 30 degrees.
Easy installation for quick results.
A wide option of cooling speeds and wind modes.
Quiet technology to keep your room peaceful.
Honeywell 470-659CFM Portable Evaporative Cooler
The Honeywell 470-659CFM Portable Evaporative Cooler is a lean, mean, effective cooling machine! It’s best suited for hot regions where the humidity level stays below 60%.
The lightweight feature makes it portable, so you can find yourself in an ideal cool space, be it in your den, office room, or living room. The airflow technology has the power of 470-659 CFM and is ideal for small to medium spaces.
Its aerodynamic technology ensures only 230W power consumption while maximizing the air flow, thus keeping your power bills well within your budget. It’s very easy to install and you can cool your room within minutes of setting it up.
Choose from its three wind modes – Normal, Natural, or Sleep – and the humidifier control to create the right balance of moisture and cool. Its oscillating louvers spread the cool air to maximum coverage, resulting in a cool room within the shortest time.
You can create the right ambiance with simply the touch of a button on the remote control. If you’re not going to be in the room, just set the timer and the Honeywell Cooler will turn off automatically. You can set the timer for up to 7.5 hours!
If the dryness that usually results in an air-conditioned room makes you feel uncomfortable, this machine will serve you right with three humidity settings that keep you from feeling dry and thirsty.
The specially designed honeycomb-shaped panels evaporate the warm air efficiently and converts it into cool air for your ultimate comfort in the torrid summers.
You can easily fill the water tank as it has a wide mouth that prevents any water spill. Be careful when filling the water tank. Make sure the top of the white float doesn’t quite touch the maximum mark. Cleaning the water tank may not be easy as the fan comes in the way of cleaning it thoroughly.
Want to make the breeze cooler? Just put some ice on the top-loading ice compartment to make the room go from cool to cold! You can use the Honeywell Cooler even during winters as a humidifier.
The carbon filter is great for trapping dust, smells, and other particles, ensuring your home is free from any contaminants. You can easily wash these carbon filters every two months to keep them squeaky clean.
A compact energy-saving system to keep bills low.
Functions as a fan, a cooler, and a humidifier.
Perfect for arid regions with less than 60% humidity levels.
Fan speed and humidifying options for the right balance.
Automatic timer to save energy and lower cost.
Ice compartment for lower temperatures in the room.
Easy to fill water tanks to prevent spillage and mess.
NewAir Portable Evaporative Air Cooler
Now we are on the 4th candidate of our Whole House Evaporative Cooler Reviews, this product has killer looks and can easily add some oomph to your room! Besides the great design, it has the capacity to cool down 300 square feet. room in a matter of minutes.
With only 160W power consumption, the NewAir Portable Evaporative Air Cooler will go easy on your electricity bill. Its automatic air louvers take the hard part out of the cooling system. You’ll always be welcomed by a gentle flow of fresh air in your room.
Did we mention that its casters and lightweight nature make it super easy to be moved around easily? Well, you have a super good-looking, portable evaporative cooler when you invest in this one. Just don’t forget to unlock the back wheel before moving it around.
The remote control makes controlling room temperatures much more convenient for you. In addition, the three fan speeds can be adjusted to give your room the perfect temperature and comfort.
With an automatic 10-hour timer, you’ll never need to worry about having the cooler on while you’re away from home. There are three types of filters- air filter, carbon filter, and Ti02 filter to ensure you breathe in the fresh air, every time.
The cooling pads are honeycombs designed to give you maximum cooling with the utmost efficiency.
Not sure how much water to fill up the tank with? Here’s some good news! There’s a water indicator that clearly shows you the maximum water level the tank can be filled with.
This product is a great buy for those living in dry areas with summers lasting for 2 to 3 months. It even works great in cooling small areas like shops or small office rooms.
For best results, keep one or two windows open when it gets too hot. Add some ice and keep the fan speed on 2 for about half an hour. You can also a few drops of your favorite essential oil to make the room smell heavenly!
One small downside to it is that it’s not completely noise-free. But then again, you can use the low fan settings if the noise bothers you.
Lower energy consumption for low power bills.
Sleek and contemporary design decorates your room.
Lightweight and smooth casters for easy portability.
An automatic 10-hour timer for optimum energy use.
Three fan speeds and remote control for easy temperature controls.
Honeycomb designed cooling pads for maximum efficiency.
Evapolar Personal Evaporative Air Cooler
The Evapolar Personal Evaporative Air Cooler has given portability a whole new meaning! It weighs only 2.87 pounds and has the dimensions 6.7 x 6.7 x 6.9 inches. Talk about personal cooling!
The machine triples up as a cooler, humidifier, and air purifier. So, there’s no worry as far as the outcoming air is concerned. It’s really easy to install. Just add water and plug into your laptop, power connection, or a power bank and watch the magic!
The device is suitable for cooling areas of up to 45 square feet, which roughly translates to a personal space of a bed, couch, or desk. The temperature drops by as much as 15 degrees with this compact yet powerful machine.
If you want just the space on your desk to be cooled, then this is the right product for you. It’s super easy to carry around. With the Evapolar Personal cooler, energy consumption is at an all-time low of only 10W, making it extremely eco-friendly.
The evaporative pads use EvaBreezeTM patented technology, where an inorganic nanomaterial is used. This special material prevents the spread of bacteria, keeping your personal space healthy as well as pet and child friendly.
What’s more, the nanomaterial evaporative pads do away with the need of a water pump as the water is sucked up by the cartridge pads.
The EvaBreezeTM technology makes the product compact, powerful, energy-efficient, and silent. The cooling pads are bio-degradable, making it a really green product.
It has built-in LED lights to create a nice, warm ambiance and comes with fan speed levels that are adjustable. You can even control the color and brightness of the light to suit your mood.
The change in color of the light is also an indicator of water running out from the reservoir. So, that’s another benefit of having LED lights in the device. The product is ten times smaller than an air conditioner and is a perfect solution for cooling your personal space.
Its smart, cubic shape adds a touch of modernism to your personal corner. The fan speed is directly proportional to the sound it produces, so it might not be the quietest at the highest power setting.
Compact size and portability for optimum personal cooling.
Cubic shape for putting on any flat surface.
Patented technology for energy efficiency and bacteria-free environment.
LED lights built in with brightness and color control.
LED brightness indicates water level in the reservoir.
Eco-friendly with power consumption of only 10W.
Easy installation with plugging to a wall outlet, computer, or a power bank.
Frigidaire EC200WF Portable Evaporative Cooler
This is one of the great whole-house evaporative coolers you can invest in. It works both as a fan and a cooler, making it the right product for arid climates.
You can either have the cooler on dry days for some cool moisture in your room. Or, you can let the tower fan run by itself on more humid days. Thanks to its lightweight, it can be easily picked up by an average person.
The portability of the machine is made easier with a handle. You can use it to carry it around the house with perfect ease, even upstairs. Its casters are smooth and won’t give you any trouble when you’re moving it.
With its wide-angle oscillation feature, you can be sure that your room is being evenly cooled, and the airflow is reaching the maximum coverage. The honeycomb-designed cooling pads offer maximum cooling efficiency, every time, all the time.
Coupled with cooling pads and wide oscillation, the airflow reaches up to 250 square feet, ensuring that your whole room is sufficiently cooled in the shortest time. It works great even in rooms as large as 15’ by 15’.
With remote control, you can easily control the room temperatures from the comfort of your couch or bed. Just be aware of the battery compartment on the remote control as it’s a bit tricky to open.
The digital display and easy touch controls are a breeze to operate. The water tank has a capacity of 1.8 gallons and is very easy to fill as it’s removable. However, it might not be easy to put it back once it’s filled with water, so feel free to take help from someone if needed.
The Frigidaire Cooler has a whopping 4 fan speeds and 3 cooling modes, giving you the ultimate choice of having your own way of cooling the room to the right temperature. It is a silent machine and won’t disturb your peace in any way.
Doubles up as both cooler and fan.
Wide angle oscillation for maximum space coverage.
A handle and casters for easier portability.
Removable 1.8-gallon water tank for easy refilling.
Four fan speeds and 3 cooling options for greater customization.
Wide-angle oscillation and honeycomb padding for maximum cooling.
AIRCARE 831000 Whole House Evaporative Humidifier
You can’t stress the importance of a humidifier enough, especially if you’re living in dry climates. If your home is properly humidified, you runway fewer chances of getting a flu attack, static electricity, an itchy and scratchy dry throat, or decaying wooden and leather furniture.
The Aircare 831000 whole-house evaporative humidifier is the machine that can save energy costs by as much as 20%. Once you install the Aircare humidifier in your home, you’ll see that it can run for an unbelievable 70 hours.
The wheels make it very easy to be moved around from one room to another. The capacity of the water tank is 6 gallons, which means you don’t need to refill it often.
Depending on the humidity level outside, it’s okay to refill every 2 to 4 days. However, if you run it at a higher fan speed or a higher humidity level, it will obviously need refilling more frequently. It takes only about 5 minutes to refill the water tank.
Its intuitive technology automatically turns off the unit when the optimum level of humidity is reached or when the unit requires a refill.
The Trapmax Filter Technology keeps out dirt and allergens from entering your home, rendering it a healthier environment both for you and your pets. These are long-lasting filters that can be replaced once a year.
Its nice and compact design is a treat for any corner of your home. It takes up very little space and is easy to stow away. The evaporation occurs naturally, without leaving a trail of white dust in your home.
The Aircare evaporative humidifier is not completely silent. It’s at its quietest on the low fan mode. However, if you turn up the fan mode, the noise increases consequently.
The buttons for humidity and fan control are the same size of the on and off buttons, making it somewhat difficult to figure out which one is which. The materials used are not the best quality of plastic but at the price, the machine still yields a good value for money.
Energy-saving feature reduces electricity bills.
Runs for an extended time of up to 70 hours.
6-gallon water tank saves from frequent refilling hassle.
Auto Humidistat turns off the unit when optimum humidity level is reached.
Trapmax Filter technology contributes to a healthier home.
Easy installation let you get it started quickly.
Easy to fill water tank, takes around 5 minutes.
Honeywell CS071AE Evaporative Humidifier
If you’re in the market for the best whole house evaporative cooler, then check this one out!
The Honeywell CS071AE cooler is a fan, a cooler, and a humidifier – 3-in 1! All you need is to add some water or ice to the tank and voila!
A full water tank lasts for about 8 hours if you have the unit on continuously. So, you might want to check on the water level before calling it a night if you don’t want to be roused from your sleep.
It’s ideal for spot cooling as it focuses its airflow on your personal space. At only 12 pounds, it is great for moving around easily and the smooth casters add more to the mobility.
Its easy set-up means you can have your immediate surroundings cooled in the twinkling of an eye, be it in your bed, couch, desk or dining room. The product consumes only 32W when set at its highest speed, so you don’t need to think twice about your electricity bills boring a hole in your pocket.
Armed with a patented Brushless technology, this device is very quiet and offers 5 different airflow speeds. If you want to humidify your home during the winter, then this device is also suitable for you as it performs the functions of both a cooler and a humidifier.
Looking for a long night of peaceful sleep? This product has a unique Low-Energy Quiet Mode that saves energy while running at a super quiet level at the lowest setting. You can set the timer for up to 7.5 hours and forget all about it!
The patented Honeywell Honeycomb cooling pads are sure to give you maximum cooling efficiency. With the remote control, it’s easy for you to turn the temperature up or down from wherever you are in the room.
Its carbon dust air filter protects your home sweet home from all kinds of odor, allergens, and dust. These filters are easy to wash off. You might need to wash these frequently if you don’t want mildew build-up or a smelly room.
Whisper-Quiet setting for light sleepers.
A weight of 12 pounds makes it very light and portable.
Super energy saver consuming maximum 32W.
Patented Brushless technology for quiet mode.
Honeycomb cooling pads for maximum cooling.
Remote control for easy operation.
Easy to wash carbon dust filters.
AIRCARE EP9 800 Evaporative Pedestal Humidifier
This is a heavy-duty machine meant for cooling a whole house of up to 2,400 square feet. It comes in the shape of a table and is heavy at 27 pounds.
Although the exterior is made from plastic, it’s of good quality, guaranteed to last long. Even after a season of usage, it looks almost as good as new.
The surface is an epitome of style, fitted with a tile. You can change this 12” by 12” tile to match your home décor. It has a nice, modern design that won’t look out of place in your home. You can even place a potted plant or a small vase of flowers on the tile!
The bottom part of the unit houses the water tank and filter while the top part holds the fan. The capacity of the water tank is 3.5 gallons so, you might expect a frequent refill if your home is quite dry.
The machine works fast to put the right level of humidity in your home, so you will probably have to keep an eye on the water level. You can also connect it to your water connection as it has casters that make it easier to move around. This will save you from the trouble of frequent refills.
It’s easy to fill the water tank and it’s recommended to use a container with a spout to minimize the chance of any spillage. There’s a small light that shows you the water level. The water level is clearly marked by a line that’s hard to miss.
There are 9 different fan speeds, so you’ll never run out of an option that’s just the right one for you! But be careful, the noise that’s produced at the 9th setting might be a tad too loud.
Its digital humidistat is a great signal to indicate when the desired humidity level is reached or when the unit is empty and needs a refill. The digital display shows you the actual versus the desired humidity level, so you can compare and adjust as per your choice.
This is a long-lasting pedestal-style evaporative cooler that goes on without a hitch for at least two years. It works wonders even in less-than-ideal conditions where homes don’t have an open concept. It keeps the humidity level at a stable point even without a cracked door or window.
Apt to cool an entire house of 2,400 square feet.
Made of long-lasting, good quality plastic exterior.
Stylish design for a modern look.
3.5 gallons water tank capacity and easy refill.
Nine different fan speeds to suit your needs.
Automatic humidistat to turn off the unit.
SPT SF-612R Evaporative Air Cooler
This is a medium-weight evaporative cooler at 17 pounds, suitable for medium size spaces like offices, bedrooms, and garages. It’s packed with versatility and functions as a cooler, fan, and humidifier.
It consumes as little energy as 65W and hence, is a big save on electricity bills. A perfect cooling and humidifying solution for your home and office, it comes with wheels to ease portability. Guess what – the wheels are already attached, so no hassle of installing these!
The oscillating airflow feature ensures that the room is getting cooled uniformly and reaching the maximum space.
The 3D honeycomb cooling pads are excellent for maintaining cooling efficiency for long periods of use. These come in a weaving pattern and helps to keep longer contact between the water and air. Also, these pads have been chemically treated to prevent bacterial or fungal growth.
Multiple cooling modes in three fan speeds are great for spot cooling. If you set this on high, it releases an airflow of 276 CFM. The remote control makes it more convenient for you to control the temperature and humidity.
The automatic timer will make sure you don’t waste energy unnecessarily. You can choose from 0.5 to 7.5 hours to set the timer. The LED control panel helps you to control all features with ease.
Minor flaws in the design may lead to water leaks. It’s recommended to fill the water tank in the bathtub or with a hosepipe. The ice-holder can help you cool down the temperatures further in your room.
The SPT SF-612R Cooler doesn’t come with batteries so, that’s something you’ll have to buy separately. The good news is that the battery compartment is pretty easy to open and you don’t have to wrestle with the compartment.
Although the left to right vents works by themselves, you have to operate the up and down vents manually. While doing so, please be careful to not break them.
Saves energy with only 65W of power consumption.
3D honeycomb cooling pads for superior cooling.
Attached wheels for easier mobility.
Oscillating air flow for uniform cooling.
276 CFM air flow when set on High.
Remote control for ease of operation.
Timer can be set between 0.5 to 7.5 hours.
LED control panel to control all features.
Luma Comfort EC45S Evaporative Cooler
The Luma Comfort EC45S Evaporative Cooler looks straight out of a sci-fi movie! A tower fan, humidifier, and a cooler – it serves all three functions seamlessly!
Suitable for medium to small indoor spaces up to 100 square feet, the versatile device is lightweight at only 12.8 pounds. It is easy to move or carry around wherever you go, thanks to its built-in casters.
Its unique tower shape is great for saving much-needed space and for putting it away when not in use. The slim design with a silver finish adds to its overall look and you wouldn’t mind owning this pretty little thing!
The product comes with remote control and three different fan speeds to make your life more comfortable. It’s a compact yet powerful cooling companion, not taking up much space. The water reservoir fills up to 1.6 gallons and doesn’t need a refill for the whole day.
Its three airflow modes – Natural, Sleep, and Manual – offer you more in terms of creating the perfect atmosphere in your room. The 90-degree oscillation is quick to cool your room. What’s more – it can reduce the temperature of your room by up to 20 degrees. That’s no mean feat!
The rigid cooling pads of this product make it more efficient to cool down your room in the minimum amount of time. The filters work well to keep the dust and grime out of the air.
At only 120 Volts consumption, it uses as much energy as a light bulb and redefines the term “economical”. Once you use it, there’s no looking back!
This is the ultimate eco-friendly cooler as it uses zero chemicals. About time we took more care of our environment. It’s been known to give service without any hiccup for three summers in a row. For a machine that size, its performance is commendable.
The maximum noise level it produces is only 64dB, making it the right selection for nurseries and living rooms. It’s not easy to clean the water tray as it’s not removable. So, please be aware of slime and mildew forming on the tray.
Energy-efficient as it uses only 120 Volts.
Lightweight at 12.8 pounds for ease of mobility.
Built-in wheels for easy mobility.
Three different wind speeds for more comfort.
Reduces room temperature by up to 20 degrees.
Noise level of only 64dB for a peaceful environment.
1.6-gallon water tank capacity.
Chemical-free and eco-friendly.
House Evaporative Coolers – Buyer’s Guide
Hope you have enjoyed our top 10 whole-house evaporative cooler reviews, time for you to sit down and consider the things to factor in before making that purchase.
First of all, you need to understand that an evaporative cooler is not the same as an air conditioner. Once you have this firmly implanted in your mind, investing in the right evaporative cooler becomes easier.
We’re about to get a bit geeky. But don’t worry, it’s short and easily put. Below are the features you need to look at before buying the device.
As mentioned above, an evaporative cooler is different than an air conditioner. The basic difference lies in how the evaporative cooler actually works. You see, it uses the natural concept of evaporation – warm air touches a cool surface and absorbs the moisture, turning the warm air into cool air.
An evaporative air cooler works similarly. It runs the hot, dry air through moisture-laden pads and turns it into cool air.
The air that the evaporative cooler releases feels like a natural breeze and is up to 20 degrees cooler than the outside air. Since there is continuous circulation, your home feels fresh and invigorating, doing away with all the stale and trapped air inside.
Evaporative coolers work well in dry regions where the humidity levels are very low – less than 60%. So, if you’re living somewhere where you tend to have humidity and rains, an evaporative cooler will not work well for you. However, evaporative coolers are used to absorb moisture in outdoor settings like garages and docks.
To prevent moisture from accumulating indoors, you should always leave a door or a window slightly open when using a whole-house evaporative cooler.
Types Of Evaporative Coolers
Whole house evaporative coolers come in different types as per different needs. Here’s what you need to know to help you pick the right one.
Portable Evaporative Coolers – These can be carried around easily and work great for smaller spaces. They can cool a room of size 300 square feet. quite easily.
Window Units – These are fitted into a window to cool down an entire house or a single room or even a garage.
Down Discharge – This type of evaporative coolers is installed on the rooftop so that the cool air is pushed down to make the entire house cooler.
Side Discharge – Instead of air pushing down as in down discharge, the side discharge type of evaporative coolers is fitted on the side of a house or a building to discharge cool air from the sides.
Depending on your cooling needs, select any one of the four types mentioned above. If you’re looking to cool down a single room, a portable evaporative cooler is good to go. Otherwise, the other types would be advisable if you want your entire house or office to be cooled.
Types Of Cooling Pads
It’s important to know the type of materials used for the cooling pads in your evaporative cooler. This will affect maintenance and cost directly.
There are basically two types of pads used – fiber pads and rigid media pads.
Fiber Pads cost lower but need more maintenance. Chances are you’ll need to replace the fiber pads often. These are made from cellulose or synthetic fiber and are good for evaporative coolers that have cooling inlets from many sides. They are usually 1 to 2 inches thick.
Rigid Media Pads are more expensive but require low maintenance and are long-lasting. These are made from corrugated sheets and work better for evaporative coolers with single inlets.
These are better at keeping the room cooler for longer, mainly because of their thickness – which is 8 to 12 inches.
Ease Of Installation And Use
There are two ways to install an evaporative air cooler – either it’s on the rooftop or it’s mounted on the wall.
While a rooftop installation is more expensive and has the chance of a roof leak, it will, nonetheless, be more effective in cooling your entire home.
A wall-mounted evaporative cooler is easier to maintain and more convenient.
Please note that a rooftop installation charge will depend on the region and the structure of your home.
Overall, both installation types are centralized to ensure that your entire home is evenly cooled. However, a more central-location installation is good for compact homes while using a duct system makes sure that all the rooms and passageways of a larger house are getting cool properly.
CFM or cubic feet per minute is the unit of measurement for how fast an evaporative air cooler efficiently cools a given space. This is an indication of the strength of the airflow.
Evaporative coolers for home use usually measure between 3,000 to 8,500 CFM, whereas a larger than average home would be better with a CFM of 7,000 or more.
There’s only one way to make sure that your evaporative air cooler is functioning at its optimum CFM – regular maintenance.
Your evaporative home cooler may come with accessories like a purge pump or a ceiling vent.
A purge pump will raise the cost of the unit, but it is a good thing to have as it will automatically drain the water every 6 – 8 hours, preventing mineral build-up and thus, making the whole unit last longer.
If you’re worried about keeping your doors and windows open, a ceiling vent will let you have peace of mind. The warm air is pushed out through this ceiling vent and you need not be on watch if someone was creeping into your home through your open door or window!
Once again, depending on your cooling needs, you have to decide on the size of an evaporative cooler.
A portable cooler is good if you want a single room or a small space to be cooled. On the other hand, investing in a big evaporative cooler for a small home would be a waste of money and energy as it would work over its optimum capacity.
For an accurate estimation of what size of an evaporative cooler you need, you simply have to divide your living space by 2 to arrive at the CFM you need.
For example, if your home is 1200 square feet. with 8-foot ceilings, all you need to do is 1200 X 8/2 = 4,800 CFM. So, you need an evaporative cooler with at least 4,800 CFM to cool your space,
Simple, isn’t it?
What Are The Benefits Of Using An Evaporative Cooler In Your Home?
Cost-Effective: The cost of installation of a whole-house evaporative cooler is half that of an air conditioning unit.
Eco-Friendly: As the technology used in an evaporative cooler is based on the natural phenomenon of evaporation, it’s environment friendly and saves energy.
Fresh Air: With a continuous circulation of air in the house, your home will always feel fresh as the warm air is pushed out to make way for cooler air.
Lower Costs: Whole house evaporative coolers cost less than air conditioners and as these are 75% more energy-saving in nature, you don’t get a foot-long power bill at the end of the month.
Good For Your Furniture: With the air inside your home properly moisturized, an evaporative cooler prevents wood and fabrics in your home from drying out, making them effectively last longer.
Healthier Home: As the carbon filters trap dust and other allergens from the air, your home becomes a healthier environment, thanks to the evaporative cooler.
How To Take Care Your Evaporative Cooler For Longevity?
The maintenance of an evaporative cooler is simple and easy. Cleaning both the exterior and the interior can extend its life and you can reap the benefits for a long time.
You must take care of three fundamental things for proper maintenance – basic cleaning, proper storage, and shut down when not in use.
1. Basic Cleaning
It’s good to check the filter, pump, water tank, and pads once a month. If you use your portable evaporative cooler for long periods of time, it’s recommended you clean the evaporative media and water curtains every fortnight with clean, lukewarm water and some detergent.
This will get rid of all the dust and dirt trapped in the filter. Besides, you might have to replace the pads every month if the cooler is in continuous use.
2. Cleaning Before Storage
The exterior part of the portable cooler should also be cleaned regularly with a damp cloth. When you are putting it away for the season, make sure to drain the water tank and clean the filter. Before packing it away, turn it on in the fan mode for half an hour to an hour so that the unit is completely dry.
When it comes to wall-mounted evaporative coolers, you need to prep it for spring and summertime use and once again, when you put it away for winter.
Before you start using it in season, clean the moisture pads and the pump to ensure these are completely ready to function.
3. Disassemble When Not In Use
Once you’re ready to put it away, check the water supply connection and disconnect it. Drain the water tank completely. Put a cover on the cooler to keep it dust-free and unplug the power cable. Make sure the evaporative media is absolutely dry and is not prone to mildew.
Remember to disconnect the unit from the power connection before you start the cleaning process.
Any quality series shocks will improve your ride feel by preventing excess bouncing, but it's also important to consider the springs used on your vehicle's suspension. Stiff springs contribute to the feel of your truck's ride, so consider your springs and shocks.
Most experts agree that it's best to change shocks after 50,000 to 100,000 miles of driving. This number changes depending on how the shocks are being used, so look for signs of wear and listen for sounds when going over bumps.
While changing the style of your truck's intake from long to short could potentially make your vehicle louder, maintaining the current style shouldn't alter the sound of your vehicle. If you want to make your truck sound different your best option is a muffler upgrade to your truck's exhaust system.
No, a cold air intake will help improve the performance of your truck and shouldn't negatively impact your vehicle. It's important to choose a quality product to put on your vehicle in order to ensure long-term performance for your Chevy Silverado 1500.
Yes, absolutely. A quality intake upgrade will improve the performance of your pickup without affecting the quality of your exhaust emission rates. The right unit can boost power and torque and will offer even more benefits than many car owners will experience.
While it's impossible to say with 100% certainty that one particular intake will give you the leading performance, you should choose a product with a high-efficiency rating, a quality air filter, and a design that maximizes airflow.
Even though Chevy Silverado models vary depending on the year and trim package, most stock Silverado 1500 trucks can handle up to 32-inch tires as long as they maintain the standard width.
Tires over 32-inches in size require a leveling kit or a lift kit in order to have enough clearance to perform properly.
Always consider the width of the tires you purchase as well because wider tires often can't be as large without making changes to the suspension system.
Different Chevy Silverado model years and trims feature different wheels. That means you will have to refer to the current tires on your truck to determine which size is right for your pickup. It should be possible to install between 17-inch and 32-inch tires on most stock Chevrolet Silverado models without lifting them.
Yes and No. When lift kits are chosen carefully and installed by a Chevy Certified technician they don't always void the OEM warranty. Only specific kits are approved though. Always consult with your local dealer if you have questions about parts and your warranty.
You should lift your pickup truck the minimum amount that will make you happy and give you what you need to accomplish your goals. If you'll have enough clearance with a 4-inch suspension lift to fit the wheels and tires you want, or to give your ride the look you want, go with that kit. If you need a 6-inch lift kit for Chevy to meet your needs, invest in that. Larger kits are more expensive and difficult to install, so it's best to use the smallest kit you'll be happy with
No, not when selected and installed properly. It's true that the wrong suspension lift or even a leveling lift kit can hurt the performance or reliability of your truck. That's why it's important to select quality kits and to get them installed on your pickup truck by an expert.
t's impossible to name one brand that's better than all the rest because there are several companies that make a quality lift kit for Chevy Silverado trucks. Motofab, Supreme, MZS, and Dynofit along with others all make quality kits, you just have to select the right product for your specific needs.
While it's impossible to say which system for Silverado 1500 will sound best to you, most buyers are happiest with exhaust kits that produce a deep and rumbling roar of a sound. This is achieved by kits such as the Flowmaster Super 44 that uses wide pipes and a carefully optimized muffler for a sporty sound. Each kit sounds different though, and it's up to you to decide which cat back exhaust system is the one you want for your ride.
Many of the recommended products on this list of best exhaust systems produce an appealing sound that owners will be happy with. I personally enjoy the sound produced by the Flowmaster Super 44, but other buyers prefer exhaust sounds from other kits. Buyers should choose products based on the sounds they produce, noting whether they are deep, loud, gritty, or quiet before purchasing one. It's a good idea to read customer reviews when choosing kits to get an idea of the sound of different products as well.
The best cat back exhaust system for one buyer will be different for another. When choosing a top product I look for durability, price and performance. The Flowmaster Cat-Back Doss Exhaust System is a good example of a durable kit that offers sound and performance improvements, but there are other excellent options available to choose from on our list as well. The best exhaust system is the one that gives you the performance and sound upgrades you want while meeting your budget.
Chevy Silverado owners should use side steps or a nerf bar setup to climb in and out more conveniently and safely.
The right accessories, like running boards, add a step in between the cab floor and the ground, creating a comfortable intermediate platform to stand on.
Although the level of difficulty depends on the specific model you’re using, truck bed lights are relatively easy to install. With some models, all you have to do is peel the paper on the adhesive backing and stick the lights. Sometimes you have to attach screws to make the connection stronger.
The real task is that of wiring the power cords to the power source.
Most truck bed led lights come in white or red. But that’s not all you’re limited to. You can get the lights in many other colors, including pink, blue, red, yellow, green, and more. There are even models that flash and change color as you go.
It is legal to install truck bed lights. Nevertheless, there are certain restrictions you have to keep in mind. The main limitation has to do with the colors.
If your lights flash red, blue, and yellow, that might confuse other motorists, leading them to think that your truck is an ambulance, fire fighting truck, or police vehicle. You might want to avoid that color combination.
Apart from helping you find things in the dark without having to hold a flashlight, truck bed lights have a whole range of other benefits. They improve the safety when installed on the outside as they alert the vehicle behind there’s a vehicle ahead in poor visibility areas. Also, they serve aesthetic purposes.
While purchasing and setting up traditional water softeners is a ‘once in a decade’ expense, your system needs regular replenishment of salt.
Depending on your hardness removal level, your salt requirement will be different. On average, a household system that can treat 7-10 grain hardness level will need a bag of 40 pound salt per month.
Usually, the cost of a bag of salt ranges between 5$ and 25$, depending on the fineness quality and whether the salt is sodium/potassium based.
So, that’s the burning question. The system is great all right, but what are the costs associated with it?
Usually, water softener price can end up anywhere from 350 dollars to 3,500 dollars and more. Depending on the materials, features, capacity, and flow rate, the price will fluctuate. But usually, an average softening system should cost between 200$ and 700$.
Then there is the installation cost. Depending on the system and your piping diagram, the installation might cost between 400 to 10,000 dollars. On average, you would have to spend 3000 dollars. Obviously, you’ll save the money if you install the system by yourself.
People take a different approach when discharging water softener backwash. Since it contains a high amount of sodium, disposing it just anywhere or your garden isn’t an option.
Most use their septic tank to dispose of the waste. But if the tank is too small, the salt can kill the bacteria responsible for breaking down the sewage waste. You can use the drain usually used to exhaust rainwater unless that leads to someone else’s property.
A lot of people dig drywell and dispose of their backwash there. Make sure the drywell is within your property line, but distant from home and garden.
ne of the common problems user's face is finding the salt tank is flooded with water. There are some indications like water coming out salty or water flow getting weaker. When that happens, it can be one of the following reasons.
• Your water softeners are too old and have started malfunctioning.
• The valve that regulates the water entry of your home is damaged and broken.
• The float valve is placed too high which is resulting in excess water.
If you experience these problems, see if you can address the issue. If you can’t, you should call a water softener repairmen. Most companies and manufacturers have experienced team of repairmen who can assist you when you contact them.
It depends on the hardness of your water. The more hard water you have, the more salt you’ll need. Usually, the system will determine the amount of salt you’ll need. You just need to check the salt reservoir and make sure it’s regularly refilled.
If you must have an idea, here’s an estimate. If you have a family of four persons and the water hardness level is 7-10 grains, then you’ll need about 10 pounds of salt per week. You’ll need a bag of 40 pound salt per month.
There are several types of salts you’ll find in the stores. Some are cheaper than others but isn’t highly effective. With so many types and brands, it can be hard to find the one suitable for you.
You’ll basically find three types at the stores. Salt pellets, salt crystals, and potassium chloride. The first two is sodium chloride. Salt crystals are found in two forms, rock salt, and solar salt.
The rock salt is mined from the ground and contains a lot of impurities. Solar salt is extracted from seawater through evaporation and much cleaner than rock salt. Both are cheap, but not as effective as salt pellets.
Salt pellets are the purest form of sodium chloride (99.9%). They are the most effective but comes with a slightly pricier tag. Those who want to avoid sodium in the household water can use potassium chloride as an alternative.
It’s important to determine the size of water softener, otherwise you’ll be underserved by the system. The general rule is, multiply the number of inhabitants in your house with the average water consumption in gallons. (Usually, it’s 80 gallons).
Now, again multiply that number with the grain of hardness found in your water. This way, you’ll get an estimation of how much grains need to be removed every day. Now, look for a system that can handle the requirement. Usually, a four-person household needs around 33,000-grain softener unit.
Well, a little plumbing knowledge helps the installation, to be honest. However, installing these products isn’t rocket science. Usually, the best water softeners come with a very detailed instruction manual. So you can install the system in a DIY way. If you still don’t feel confident enough, you can always call a plumber.
Yes, but it depends on the kind of damage. For issues in the ceramic, marble, porcelain, or granite – you may not be able to repair it. But for problems in the wooden or MDF body, taking the piece to a woodworker can be a great idea.
Apart from adding a touch of style to the piece, the paints and coatings also help to increase the durability of the product. In some cases, they may last between 1 to 5 years. But a high-end product may offer decades of use without problems.
The best way to install a vanity is to follow the installation instructions of the specific model. If it doesn’t come with any and you don’t know how to proceed, we recommend contacting an expert to prevent any unwanted result.
Generally, LED under cabinet lights can last for up to 50,000 hours. This roughly translates into six years of continuous performance. Then they deteriorate to 70% of the original brightness. So if you use the lights for less than 12 hours per day, they can last more than 10 years.
The amount of brightness for LED bulbs vary significantly among different manufacturers. Lumens can be counted for each LED bulb incorporated in a light strip or for the whole strip together. The ideal amount depends on the kind of activity you are going to perform below the cabinets.
For example, if you need them only for decorative or aesthetic purposes, 150-250 lumens will be enough for each foot. On the other hand, for carrying out cooking or similar tasks under these lights, you will need 175 to 550 lumens per foot.
Keeping the kitchen tasks in mind, we recommend using white color LEDs for under cabinet illumination. They can be in warm or cool tones to match your interior aesthetics.
White seems the best choice for this matter since it does not overpower the natural color of utensils, food items or the surface below. This makes it easier for you to work with normal vision when the lights are on.
You can place the LED lights at the back, front or in the middle of under cabinet space. Installing them behind will help to brighten up the backsplash where utensils may be placed. Doing the same in front will help you to continue cooking tasks effortlessly.
It depends on your preferred coverage and intensity of bulbs. Ideally, every 0.5-1 feet of a cabinet surface will require one puck light. Such consistent intervals will ensure an even distribution of light everywhere around the cabinet. It also avoids the formation of any shadow or dark areas.
Yes, under cabinet lighting has been proven to add value to any home. These affordable lighting solutions enhance interior aesthetics and make the kitchen space much more attractive to potential buyers.
Even though most house sellers tend to overlook this feature, such lighting actually succeeds in drawing more customers.
The installation process depends on the product type. Generally, light strips and bars can be installed by sticking to the surface with double-sided adhesive tape. You can also mount the light using screws into the cabinet.
Some under cabinet illumination systems also come with built-in magnets. They can be installed directly on any ironwork surface using their magnetic properties.
Compared to other batteries such as NiMh or Ni-Cd, LiPo's have four times more energy density. They are also lightweight and pliable. LiPo's can also be made into any shape. Also, they are resistant to damage compared to other rechargeable batteries.
Charging LiPo batteries is not a complicated process. Charging them usually involves four basic steps. The first step is to plug in the charger and the balance leads between the battery and the device. Then use the navigation buttons, or touch screen selects the charging mode.
After that configure the cell count, voltage and charge rate. Then press the ‘Start’ button to begin the charging process. Make sure you don't leave the charging session unattended.
This varies depending on the type of battery being charged. For a 3000 mAh battery, you want it to charge it at 3A. For 5000 mAh battery, the device should be configured to 5A and so on. The charge rate for the safe charging of LiPo batteries is 1C.
The average voltage for LiPo is 3.7V. They can be easily charged up to 4.20V, whereas the discharged voltage is 3.0V per cell. If the voltage is anywhere lower or higher, the cells inside the battery can get damaged.
You should not leave a LiPo battery when the charging process is taking place. Although these batteries are reliable, they may still puff, smoke, and catch fire. If a scenario like that occurs, you have to handle and contain the situation before any damage is caused.
The best RC battery charger models often come with this feature. As the name suggests, this feature supplies energy to your battery quickly and saves time. The way this process works is that it skips the balancing step.
It pumps current into the batteries quickly before reaching its peak voltage. With this process, you can get to use your RC vehicles faster.
Balance charging is a feature found in most chargers. Balance charging is a technique that improves the cell's longevity. The way it works is that the charger will for the same voltage level for each cell in your battery pack
If the voltage of any cell is above or below the required voltage, there is a chance the battery would get damaged.
Balance charging is a feature found in most chargers. Balance charging is a technique that improves the cell's longevity. The way it works is that the charger will for the same voltage level for each cell in your battery pack
If the voltage of any cell is above or below the required voltage, there is a chance the battery would get damaged.
The hitch ball has to endure lots of friction, which causes it to wear quickly. It you want to preserve your ball mount and keep it working more efficiently and for longer, apply grease before use. That will reduce the rate or wear
WD-40 is one of the most versatile products a DIYer can have. Apart from acting as a lubricant, it also works well as a rust fighter, and you can sure use it to protect your hitch from rust. Look for the SPECIALIST® LONG-TERM CORROSION INHIBITOR model.
Hitches are known to rust quickly. That is due to the stress they go through as well as the friction they have to deal with. To keep your hitch from rusting, cover the receiver opening with a hitch cover when it’s not in use. Also, spray it with a non-solvent based product like Fluid Film to protect it from rust.
Yes, and not just cars; other moving machinery as well. As long as there’s some frame or strong bumper to attach the hitch to, you can use it with any car or machinery like mowers, haulers, and tractors.
Absolutely. Some folks use a strong rope or a chain. However, these items are meant for use only in emergencies as they present high risks. The rope or chain could break and then there’s the problem of braking. When you step on the brakes, the trailer could hit the tow vehicle.
Ultimately, a hitch is the safe way to go.
There are usually up to 5 classes of hitches starting from class 1 or class I all the way to class 5 or class V. While class 1 has an opening size of 1 ¼ inches and can handle a GTW of up to 1500 pounds, class 5 has an opening size of 2 ½ inches and can take up to 12000 pounds.
The higher the class, the more the weight capacity.
Class 4 hitches are those with an opening size of 2 by 2 inches and a GTW capacity of up to 10000 pounds. These are normally heavy-duty units and can be either weight-carrying, weight-distributing, or both
Hitch classes are given based on the size of the receiver opening and the towing capacity. Class 2 hitches have an opening measuring 1 ¼ by 1 ¼ inches and can handle a gross towing weight (GTW) of up to 3500 pounds.
No, not anywhere. Hitches are ordinarily attached to the frame due to the strength and stability offered. However, some hitches, called bumper hitches can be attached to the bumper. These, are, however, not able to handle lots of weight as the strength of the bumper is much lower compared to that of the frame/chassis.
There are many types of hitch receivers, but the main types are 3. There a are rear hitch receivers, which are attached at the back, front hitch receivers, which are attached at the front, and weight-distribution receivers, which are rear hitches that increase the towing capacity by distributing the tongue weight between the tow vehicle and the trailer.
Some of them come fully assembled, while some of them don’t. For unassembled products, however, the product should come with a clear instruction on how to assemble it. Additionally, there should be ample YouTube videos to help you with the process.
Frequently clean the hose and other components by getting rid of the collected debris. Use a small brush to clean the dust off the filters. You can also wash the filters with water after brushing. Make sure you dry the components properly before reinstalling to prevent foul odor.
There are many reasons for why the suction power is weak. It is possible that the hose is blocked by debris. The filter may also be clogged by collected dust or the vacuum box may be full. Clean them in order to clear the blockage.
You can either get it from an auto parts dealer or buy it online. But, the latter choice is much better for obvious reasons like the ability to compare prices, models, and qualities, not to mention the shopping convenience that an online retail outlet like Amazon offers.
Have a look at the models reviewed in this article. We have researched each of them, and we believe they have what you’re looking for.
If you’re hoping to buy a cold air intake from Amazon and install it yourself, as a DIY project, then you’re looking to spend around 150 to 400 bucks, depending on the quality of the cold air intake you purchase. Having it installed by a mechanic could cost you up to 200 bucks extra, so we’d say do it yourself; it’s a simple installation anyway.
The factory air intake is designed for low engine noise. Well, that is okay, but it compromises air intake, and subsequently, performance. Factory air intakes or rather OEM air intakes are designed to draw air from beneath the hood, and the air they draw is normally hot.
Unlike cold air, hot air doesn’t have much density, and as such, there isn’t as much oxygen in hot air as you would find in cooler air. Keeping in mind that oxygen is what is needed for efficient combustion to happen, replacing the factory air intake with an aftermarket cold air intake is a great move. It improves performance, sound, and fuel efficiency.
A bad air filter presents lots of trouble for the car. First, if the air is not filtered as it should be, and dirt and debris reach the engine, that might cause damage to the engine; sometimes the damage can be substantial or irreparable.
Again, a bad air filter prevents adequate clean air from reaching the engine, and as a result, the car’s emission control system can be affected. That leads to the emission of black, sooty exhaust gases.
As the fuel-air mixture contains too much fuel and too little air, the spark plugs might also get damaged.
Yes. As you might already know if you have a car with a turbocharger, increased horsepower and torque are acquired through increased compression of gases. A cold air intake introduces more air into the internal combustion engine, availing more air for compression and enhancing the speed further.
Not at all. On the contrary, a cold air intake will improve the performance of your engine and your car in general. When the engine combusts fuel at a lower temperature, fuel efficiency will also improve, meaning that you will also spend less on fuel.
Yes, of course. With better combustion of the fuel, there’s not only increased horsepower but also better fuel efficiency.
As a matter of fact, you can note an increase in mileage by up to 5 miles per gallon. Horsepower can rise by up to 20.
Note that the cold air intake introduces more air into the internal combustion engine, and some folks want to compensate for that by adding fuel; that’s the wrong approach. Use fuel as usual, and you will realize the efficiency we’re talking about.
The intake is usually a system composed mainly of a tube, a filter, a mass flow sensor, and a throttle body, and it is located strategically in the engine bay, normally at the front, so it can be able to pull air from outside, either from under the hood scoop, the grille or the wheel well.
Mechanics and car experts prefer cold air intakes because cold air contains more oxygen than hot air, and with more oxygen, the combustion process is enhanced. With cool air entering the internal combustion system, there is improved fuel efficiency as well as more horsepower and torque.
As the name suggests, air intakes are pieces of equipment that draw air into the engine. There are different types of air intakes, such as short-pipe, ram, and cold air intakes. Ram and cold air intakes are preferred as they draw cool air (which is better for the combustion process) into the engine, but cold air intakes are good for DIYers due to their relative ease of installation.
A cold air intake allows the air filter to flow outside of the engine so the cold air can get into the engine. It is an aftermarket product and installed as the replacement of stock air intake. It looks like a bent pipe. On one end, there is a filter and an opening to the engine on the other.
A KVM switch allows you to control and manage two or more PCs simultaneously. Apart from PCs, these devices can be used to control servers such as print and domain servers.
An important distinction between them is that the KVM switch controls nearby devices such as those located in the next room or the same building.
Console servers allow users to control a wide range of network devices located both at local and remote locations. Console servers can control and manage servers, Firewalls, routers and more.
This varies from device to device. Their primary function is to switch between multiple computers. Normally this is done by pressing the switch button on the hardware itself.
Some devices also support hot hey switching. This allows you to alter between the connected PCs by pressing a combination of buttons. Other variants come with remote control that allows you to change inputs remotely.
There are multiple varieties of KVM switches available on the market. The device comes in a wide range of sizes and configurations. It usually comes in 4, 8, 16, and 32 port configurations.
The USB KVM switch allows you to hook up your input peripherals using USB cables. These generally plug and play switches that allow you to connect your hard drives, printers, scanners, etc. through USB.
The HDMI KVM switch is perfect if you have a high definition monitor. This variant provides high resolution. Monitors are connected via HDMI which is ideal for viewing high-quality multimedia.
The KVM over IP switches allow users to control all PCs or servers over the internet no from anywhere.
Hot Key switching is a way of altering between several inputs. Rather than pushing the switch button on the KVM, hotkey switching allows you to change inputs by pressing a combination of keys on your keyboard or hitting specific key multiple times.
Using Hot Keys, changing inputs between various connected devices is quick and easy.
Some KVM switches do support audio. They have built-in audio inputs for audio applications. You can easily hook up your speaker and microphone to the built-in ports. All the connected devices will share the same speaker that is connected to the switch.
This depends on the KVM switch variant. These switches come in a wide range of shapes and sizes. If you are looking for a simple switch to control 2 or 4 computers, then they won't take up much desk space due to the small size.
Large KVM switches used for offices or enterprises will take up a considerable amount of space. You also have to account for the wires that are connected to the switch as it will require some room as well
Small KVM units don't usually require an external power source. Such variants simply connect all your devices and peripherals. They draw power from the connected devices to work.
There are some KVM switches that have a DC input. In case you connect power-hungry devices such as printers, you would need to connect the supplied power adapter to the switch.
The enterprise-level KVMs do require power adapters as they handle a large number of computers. If you are looking for an affordable KVM for household use, you won't require an external power unit.
Setting up a KVM switch doesn't require much effort. Anyone with little knowledge about KVMs will be able to set all the connections. Simply turn off all the devices that will be connected to the
KVM switch. If your unit comes with an external power source, then connect it. After that connect your monitor and input peripherals to the unit.
Then use the KVM cables to connect the PCs to the switch, and turn on all the devices. The switch button will allow you to alternate between the connected PCs.
The standard for backyard floodlights is 700 to 1300 lumens. That being said, the figure is not written on stone. Go for whatever you’re comfortable with. You could even experiment with various levels of luminosity to find out which one works best for you.
If you install floodlights, there’s a good chance they’ll bother your neighbors. But that also depends on your neighbors’ tolerance for lights and the distance between your home and theirs.
There are several ways in which you can reduce the effect:
Use motion sensor lights – these will stay off most of the time, so they won’t bother your neighbors much.
Install bulb covers – these will shield the direction of your neighbors’ homes and ensure the lights are shining only in your home’s direction. Try to focus the beam downwards.
Use low-lying low-brightness lamps – low lying lights are not as bothersome as high lights. Also, go for the bulbs with the least lumens that work for your purpose to reduce the brightness.
Don’t install too many lights – if your home looks like a light house, or as a beach restaurant, you’re likely going to have problems with your neighbors. Minimize the number of bulbs.
Floodlights are wide-beam lights that spread light with an angle of 120° or more. These are used to light up large spaces such as the yard. Spotlights, on the other hand, are narrow-beam lights that emit more focused light with an angle of about 45°. These are used to illuminate spots like the entrance.
It depends on what exactly you’d like to illuminate. For steps and paths, 100 lumen bulbs will do just fine. For wall lights, 100 to 300 lumens will be okay. But for large spaces like the backyard or the driveway, you want brighter lights with over 800 lumens depending on the exact size.
Your choice of canopy will basically depend on your budget and your ideal coverage. Wing awnings guarantee sufficient space for most, if not all, your activities.
On the other hand, straight awnings are averagely smaller, but it would be great to look at individual specifications. When it comes to budgetary considerations, you are guaranteed high-quality straight options at slightly lower prices than those of high quality winged brands.
No! They are installed on the roof racks even when folded and not in use. More importantly, camping canopies come with weatherproof storage cases often made from PVC or nylon materials. This helps to keep the roof rack decent and compact on top of your automobile.
Indeed, the kind of product you purchase will influence the type of environment you venture into. Summer outdoor enthusiasts will have no problem with nearly any type of canopy. However, all seasons campers will need shelters which are well ventilated and also have perfect waterproofing ability.
Again, there's no definite number of people who are required to put up an a car canopy. One person can singlehandedly install most canopies but two pairs of hands will be fine for any of these shelters.
This is a hard call to make because both types have merits and demerits. The core factor when it comes to this is to consider your working capabilities and the type of weather you hope to face.
Freestanding designs are pretty easy to mount and take down. They will also easily be mounted anywhere, including on rocks where drilling holes is impossible but may not be stable enough for strong winds.
On the other hand, supported shelters have the ability to stand firm against harsh weather but will take you some time to properly set up. The choice is all yours.
Opening and closing a car shelter with a simple click on a button is highly appealing. Moreover, you don't have to use any working capabilities. Those are the core benefits of electric car canopies.
However, these appeals are not as enticing when you realize that you need a separate power source for operating the canopy. A fair bit of freedom and portability is also lost when dealing with electric car shelters making them less preferable.
That depends on how it is made. A cheap unit is likely to be made of low-quality materials, thereby increasing the chances of flutter when the truck moves.
But premium covers are mostly tight and make minimal amounts of noise when the truck moves.
If you have a bigger budget, a hard cover would be more appropriate as it offers you better protection against elements and burglary, more strength, and higher durability. But if your budget is tighter, a soft cover would be the better option as it’s cheaper. That’s not to say that a soft cover has no other benefits; it offers you a sleek look, and is easier to install and handle than a hard cover.
On the other hand, keep in mind that a hard cover offer a more low profile look than a soft one, as it sits only an inch or two above the bedrail.
A tri fold offers you more strength and quick access to the truck bed. A roll up, on the other hand, offers you affordability and simplicity. The question of which one is better depends on what you’re looking fo
No, it is not. Car washes use high pressure jets and spinning brushes to clean vehicles, and these can damage your truck bed cover. It’s best to clean the truck at home using gentle methods or remove the cover before taking the truck to the car wash.
The best tonneau covers are made of waterproof materials such as aluminum, fiberglass, and vinyl. The problem is the edges, as these might contain gaps that allow the water in.
When looking for a cover, be keen on the unit’s features for preventing the water from getting in through the edges. Some come with Velcro strips, and some come with rubber strips and weather stripping. These guards are vital.
Though the ease of installation varies with different models, installing a truck cover is generally easy, and perfectly suited for a DIYer.
Some models require drilling and cutting holes for the rails, especially where a truck bedrail cover is installed. Other, easier to use models, only need to be clamped onto the rail of the truck bed.
Many experts have reported that a tonneau cover improves fuel economy for trucks. The premise is that the cover reduces the aerodynamic drag, thereby reducing the workload for the engine. That subsequently improves gas mileage.
Not all truck owners have observed the benefit, but majority of those that have installed a truck cover have reported seeing an improvement in fuel economy by as much as 10%.
To give your truck a better appearance, to protect the items you want to carry in the truck bed from rain water, sunlight, wind, burglars, and so on. There’s a whole list of benefits that come with installing a tonneau cover for silverado.
The most effective way is to insulate it and install a garage heater. Insulation will ensure the heat emitted by the garage heater remains in the room, and hence you won’t have to set very high temperatures, meaning you get to save on energy costs.
Estimating the cost of running the heater is a piece of cake. Just take the input power in kW and multiply it by the price you pay per hour for energy. So, if the input power is 4000 watts (which is 4 kW), and you’re paying 7 cents per kWh, that will be 4x7 = 28 cents per hour.
If you keep the heater on for 5 hours daily, that is 28x5 = 140 cents daily. Per month, it will be 140x30 = 4200 cents or 42 dollars.
Tips: If you use an electric garage heater 120V is very cost effective items.
Of course, they are, but only when you take the safety precautions provided by the manufacturer seriously. To boost your safety using a garage heater, ensure you buy one that is UL approved because then you’re sure it’s gone through the safety testing process.
The Electrical Safety Foundation International warns against leaving your space heater on unattended. According to the organization, heaters are the 2nd leading cause of accidental fires in US homes.
But that’s a risk you can avoid by ensuring that you always disconnect the power when leaving the room.
For the cold times like when you’re working in the garage late in the night or early in the morning. When it’s winter, a garage heater will definitely save you a great deal of discomfort. The device can also be incredibly helpful if you live in an area that is naturally cold.
This is a self-contained appliance used to heat the space in a garage. It’s different from a central heating system in that it is used for heating a single enclosed space like a garage or workshop rather than many rooms in a house.
Garage heaters can be powered either by electricity or combustible fuels like propane.
If you have purchased a product that is suitable for metal, you can apply that lube for all the metal accessories such as windows hinge, door rollers, nuts and bolts, and more.
Again, some lube is even suitable for wood and plastic materials. It is better to read the product description to have a clear concept where you can use it.
If you search for the high-quality door hinge lubricant, there will be both home door hinge lubricant and car door hinge lubricant. If you are in a trouble to find the right one, you can always pick the Lucas Oil 10533 from the above list.
It depends on the condition of the door hinge. If the hinge is still new and there is no rust and it is moving perfectly, you can avoid lubricating. But with time, the hinge will start decaying because of the friction. On that time, you must have to use the lubricant to protect the hinge.
Plaster is a mixture of sand, cement, and binders. On the other hand, spackle is made of a mixture of gypsum powder and binders. While plaster is used to cover concrete walls, spackle is meant for doing repair work.
Plaster is for use on large areas but spackle is for covering up small areas.
Some spackling compounds can be annoying with regards to their drying time, taking more than 24 hours to become ready for sanding and painting.
If you’re looking to speed up the process, one way to do it is to apply a heat gun. The hot air will accelerate the drying process and reduce the drying time tremendously.
You can use a blow dryer or a fan in place of a heat gun.
It is, nevertheless, good to note that using hot air to accelerate the drying time can result in cracks.
If you’re talking about spackle that still has not been applied, the answer is no. The spackle will absorb water and go bad, becoming unusable.
But when spackle has been applied to a wall and allowed to dry, the patch is normally waterproof.
If you’re asking whether spackle is poisonous or toxic, the answer is not really. Most spackle don’t cause irritation to the skin and they generally don’t pose any threat.
It is, however, essential to be cautious when sanding the dry application. Take care not to inhale the dust as it can harm your airways, just like any other dust.
Biometric fingerprint readers do not store images of your fingers. When employees are enrolled, the scanned fingerprint is stored as a template, which is created using a specific algorithm. Other than biometric fingerprint devices, these templates cannot be used anywhere else.
Also, it is not possible for anyone to turn these templates back to replicate a fingerprint scan. So when it comes to privacy, you don’t have to worry about privacy as your fingerprints are not stored.
The time and attendance software is used to track employee clock timings. Administrators can keep track of their employee's shift timings, working hours and much more.
One benefit of using this software is that it helps companies control labor costs by reducing the number of over-payments.
It is efficient in eliminating any transcript and interpretation errors. The software can generate a wide range of useful reports, which helps companies to streamline their attendance reporting process.
Compared to the traditional Pin or keycard systems, biometric systems are far more secure. Biometric time clock systems effectively eliminate ‘Buddy punching', so employees can register inputs by only using their fingerprints.
The system doesn't save any personal information, so there is no risk of any sensitive data being compromised.
Rejections occur due to multiple reasons. One of the main reasons is incorrectly placing the finger on the scanner. To ensure that scans are registered properly, place the finger flat on the reader and hold it for approximately 1 to 2 seconds. This gives the system adequate time for proper scanning.
To register the punch in and out times, the finger should be placed on the scanner the same way as it was placed when first enrolled. Make sure your fingers aren't dirty, damaged or placed on the scanner awkwardly.
First of all, employees must be enrolled in the time clock system to register their punch in and out times. When enrolled, the software records the employee’s fingerprint template and then associates it with their ID number.
The fingerprint templates are different for each employee. This allows the system to distinguish between them.
Every time an employee punches in or out, the software verifies the scanned fingerprint with the stored templates. If a match is found, the clock times are recorded.
Frameless shower screens are more prone to leaking than the framed ones. They don’t come with the bottom seal or rubber by default. You will need to purchase and install it separately for most frameless shower doors. Also you can use a caulk to seal the leaks.
You can always buy it from your local shops. You can check the product physically before you order it. However, your local shop probably won’t have a lot of variations for the shower door because that’ll require a massive space.
You can order it from online to get a wide variety of colors and variations. The most popular online place to frameless shower doors from is of course Amazon, eBay, Walmart. You can check out the rating and highlighted features, along with elaborate frameless shower door reviews for any particular product.
So if any brand is bluffing, you will know right away! In case you receive any faulty product, the manufacturer will be happy to replace it.
One possible drawback of investing in frameless shower doors is that they are prone to shatter. The main element - tempered glass - can easily fall into pieces as a result of a faulty installation or any other similar situation creating pressure.
It’d be best to take the whole tool set with you. Just set it in the boot but if it’s very bulky or you want to take only the vital tools, carry a few different types and sizes of these: screwdrivers, crescent wrench, adjustable pliers, utility knife, jack, and ratcheting sockets.
Realize that the terminal cables are attached to the terminals by bolts and nuts. That implies that you will need any of these: vise pliers or a wrench (crescent or adjustable or socket). For the wrench, a 10mm would be most appropriate.
Well, that depends on the kind of mechanic you’re looking to be. If you need to know basic mechanic skills for your DIY tasks with the car, then you can just read articles and watch videos on how to do basic repair and maintenance like changing a tire, replacing the fuel pressure sensor or replacing the headlights.
On the other hand, if you want to be a professional who handles other people’s vehicles, you need to get an associate degree or a certificate in automotive technology. Getting an associate degree usually requires two years.
Frankly speaking, there is no simple answer to this question. However, I can suggest you two things: firstly, established brands ensures the quality of tools, and secondly, read some authentic reviews online. Hopefully, you would be able to identify quality tools.
Sometimes the product will stop the leaks instantly, and at other times it will take 20 to 30 minutes to see the results. In case you still see the leaks 30 minutes after applying the product, try applying another dose
ormally, a bottle of the stop leak product treats four gallons of capacity. Therefore, a bottle is enough for a moderate-size cooling system or rather a 6 to 10 cylinder engine. For smaller systems, say a 4-cylinder engine, half a bottle should be enough.
That is an indication that your radiator needs service. Normally, it comes as a result of not changing fluids as frequently as you should or using hard water instead of distilled/soft water. Scale deposits are formed in the ducts, and the deposits may crystallize or jell. Use a flushing machine or flushing agent to get rid of the deposits.
You can, but if you’re looking for the perfect results, then it’s better to pour it into the radiator. In the event that you’re unable to access the radiator directly, then detach the top hose and pour the stop leak in there. Reconnect the hose and follow the rest of the instructions for using a stop leak product.
Antifreeze is a component of the engine coolant. It prevents the water cooling the engine from freezing during winter or boiling during summer. Normally, the coolant contains antifreeze and water in a 50/50 ratio.
If the holes or cracks are very small, then applying a good stop leak product takes care of the problem in a somewhat permanent manner but if they’re big, then the stop leak product only provides a temporary solution and eventually, you will need to replace the radiator.
A 6d nail is the least among these nails, with a length of 2 inches. 8d and 12d nails measure (in length) 2.5 inches and 3.25 inches respectively. The 16d nail is the longest in the list, with a length of 3.5 inches. But of course, there are nails that are longer than 3.5 inches.
Framing nailers use power shoot nails into wood. The power they use can be derived from an air compressor (for pneumatic/air-powered models) or a battery (for cordless units).
Pneumatic nailers use compressed air from an air compressor to work as a propellant for firing nails. On the other hand, the cordless generate hammering force from the combination of battery and fuel cartridge.
Many people know that the size of the nails you use when joining lumber is important but they don’t take it seriously. Realize that if you use nails that are too long or too fat, the wood might just split. Again, if the nails are too short or too thin, the connection might be very weak.
The installation of a frost free pipe is totally a DIY task. Some models, such as the ones from Sharkbite, are push to install, making the process very easy.
If there’s no hole for the pipe, you need to drill one through your house’s wall. Also, unless you’re using a push to fit model, you’ll need to do some soldering or apply glue or a strong hose clamp to create a water-tight seal at the point of connection.
No matter what faucet or sillcock you’re using, it is advisable to disconnect the hose after use. That’s because there could be water in the hose, which might flow back and freeze in the faucet/pipes, causing them to burst.
No, you don’t have to. If you’re using a frost proof sillcock, then you can safely keep the water on all year round. However, after using the water, be sure to engage the shut off from inside the house and disconnect the hose. Also, ensure you’ve drained any water remaining in the outer portion of the pipe feeding the spigot.
If you live in an area where the temperatures drop to freezing points, then you probably know that water freezing in the pipes can cause the pipes to crack or burst. That’s a result of the pressure that the frozen water exerts.
Frost free sillcocks ensure there’s no still water in the very cold part of the pipes, thereby preventing freezing and subsequent bursting of pipes.
A frost free hose bib places the shut off valve way inside the house where the temperatures are warmer, thereby preventing the water from freezing. Any water in the outer part of the pipe drains to the outside, leaving none in there, so there’s nothing to freeze.
The length of a frost free sillcock matters because it determines how far away the shut off valve is from the freezing temperatures outside. It’s usually measured from the flange to the tip of the inlet pipe.
Most coil cleaning products have a no-rinse formula. This means that you do not have to rinse the cooling unit with water after the solution has dried.
However, you might want to give the coil a quick rinse to remove any residue. The products that do not have a no-rinse formula has to be thoroughly cleaned with water.
The purpose of coils is to extract the heat out of the air. If the cooling units are clogged, the extracted heat will not be able to escape and as a result, the air conditioner will not provide cool air. With clean cooling units, the heat can be efficiently taken out from the air and maintain stable cooling performance.
In general, AC cooling units need to be cleaned whenever they get dirty. Several factors affect how fast dirt accumulates in coils. The duration of the operation, of the space around the cooling units, and dust clogged filter are the major reasons that contribute to dirt build-up.
You should clean the coils a couple of times a year. However, in case of dirt may accumulate fast, you should perform a thorough cleaning of the cooling units using a cleaning solution. It is also important that you keep the area around the coils clean, and clear the clog from the dust filters regularly.
Some acid-based solutions can corrode the surface of the coils. Acid-based detergents are too aggressive which damages the delicate components and may remove a small layer of the metal.
Alkaline-based detergents are much gentler on the coils and are a better option when cleaning delicate metal components.
Solutions that come in concentrated form requires dilution. Before applying the solution to the dirty surface, you must first mix it with some parts of the water. If the contamination on the coils is severe, then a concentrated solution can be used to clean and brighten the aluminum surface.
Solutions that come in an aerosol can don't need to be diluted. They can directly be applied to the surface. If you are looking for a detergent that you can use quickly, then aerosol-based detergents will be ideal for you.
Commercially available condenser unit cleaners that are approved by the government are safe to use. If the solution is approved by the U.S.D.A, it does not contain any constituents that may be toxic to humans and the environment.
You need to be careful when purchasing an AC cleaning product. There are several ac cleaners on the market which makes it easy to get the wrong one. Always purchase the best coil cleaner for AC that is approved by the authorities.
Condenser coils are also known as outdoor coils as they are a separate unit that is located outdoors. Its main function is to expel the heat that is absorbed from the air.
The evaporator unit is sometimes referred to as an indoor cooling unit. It is responsible for extracting the indoor heat and adding it to the refrigerant.
It contains a series of bent pipes and fins. The cool refrigerant travels through the unit, making it cool. Air blows across the cold unit and supplies the cool air to your rooms.
It is evident that metal handlebars will obstruct the sun visors from extending entirely to the windshield but you can easily pull them (visors) towards you to allow for full blockage from the sun glare.
Usually, you need not do anything. The metallic grab handles/bars are coated with a powder which protects you from UV rays, rust, and corrosion.
Some handles have an extra rubber grip over the metal bars which not only offers additional grip but also protect the handlebars.
Note that all the vehicles are not designed the same and there can be minor variations in the dimensions of the vehicle. If your handle requires drilling and you are not familiar with this procedure, it is better to consult a professional for help.
Never venture on your own if you don't know the appropriate procedure. It might result in damage to the handle as well as your vehicle. Some companies provide customer care number, and you can contact them for any additional help.
The handles or roll bar type grip handles are designed to fit all sizes of hands. The surface area handle will allow mounting a palm of area 4 inches (extra large hand).
So, you need not worry about the fit of your palm and buy them straight away.
Periodically check and tighten all fasteners. Stripped, fractured, or bent bolts or nuts need to be replaced. Keep all surfaces free of dirt, road grime, and standing water to ensure finish longevity.
If you see any physical damage and you are within the warranty period, return and replace the product immediately.
Some of the good brands for grab handles are Hooke Road, Danti, Fullele, OxGord, and Autosaver. All these companies produce superior quality products and offer warranty ranging from one year to lifetime.
It depends on personal choice. Note that solid grab handles will block the complete extension of sun visor towards the windshield. Whereas the fiber or nylon grab handles (roll bar) can be folded to allow visor extension.
Both offer almost equal safety for everyone in the vehicle. The solid bars are slightly superior because they are metallic built, but they may rust and corrode. Some metal grab handles will cause uneven cranks in the vehicle because of uneven expansion during summer and winter seasons.
Nylon grip grab handles are all-weather resistant. Though they do not offer similar functionality as metal handles, they are easy to install and can fit on to most vehicles.
Use appropriate and adequate care in lifting components into place. Ensure parts will remain secure during installation and operation.
Wear safety glasses when installing the kit. A drilling operation will cause flying metal chips. Flying chips can cause serious eye injury. Use extreme caution when drilling on a vehicle. Thoroughly inspect the area to be drilled (on both sides of material) before drilling, and relocate any objects that may be damaged.
Finally, use extreme caution when cutting and trimming during fitting.
The manufacturer will describe the compatibility of the grab handles along with the installation instructions. You can check the label of the product or contact the product manufacturer.
Specific handles such as roll bar grab handles can be installed on almost all vehicles with simple tweaks.
No, a programmer doesn’t increase your maintenance cost.
If anything, it saves you maintenance costs by helping you read and delete the error codes. In addition, they show you safety alerts. So, the owner can run their own diagnostic and remove error codes instead of spending money by calling in professionals.
The gauge is useful for showing you real-time data pertaining to the inner works of your engine. These gauge and monitor displays are critical and can show you hundreds of parameters on one platform. From such data, you can be forewarned of any engine issues.
The gauge is a good way to keep you and your vehicle safe. These show the temperature, speed and RPM readings. All such info is important for the upkeep of the engine.
The power levels you can get from a programmer depends on the model of your vehicle and the tuner itself. However, there are some basic levels of power that you can get from most programmers.
The stock setting is not a power level per se but if you select it, the factory settings of your vehicle will be restored. Getting the factory setting back is essential before you take the vehicle for an emissions test or maintenance.
Mileage or economy setting may not always be overtly offered as a power level. However, you’ll find out that most tuners do offer ways to improve fuel consumption.
The towing power level is to help you run your vehicle on a higher gear by increasing the horsepower. You might need this power level when you’re towing heavy loads.
Off-roading power levels and race levels are offered by some tuners. The former is meant for gas-driven off-road vehicles on uneven terrain. The latter is meant for racing or fun driving by increasing the horsepower.
Programmers can be either plug-and-play or an external device. For the first type, you need to plug it into the OBD-II port of your vehicle. The tuner gets all the information from your vehicle’s computer system. This computer system pulls the customized tuning from the programmer.
The external type of tuners is not connected to the vehicle’s computer system but is connected to the wiring harness of your vehicle. It’s a stand-alone computer by itself. These catch signals from engine sensors and sends the modified signals back.
Some programmers are universal and will fit any vehicle. There are others that are particular for a certain model, engine, make and year of the vehicle. These tuners have chips inside carrying information related to a variety of vehicles and their engines.
The programmer allows you to modify the air/fuel ratio and other parameters to boost the performance of your ride. These tuners have the data to check how far your vehicle can be pushed to take full advantage of the capped parameters.
Signals are sent through the programmer to override the factory ones to boost power. Such tuners allow you to customize the tunings and set your own parameters. You can either choose from a pre-loaded tuning option or set your own.
The best-quality programmer for 5.3 Silverado will look after fuel economy and make sure you increase miles per gallon. When the power and torque are increased by the programmer, there’s fuel economy as a result.
The tuner increases the timing of the fuel delivery, resulting in a more complete burn. Thus, you get more power out of your fuel than you would have done otherwise.
Another way mileage improves is when you boost your horsepower and run your vehicle on high gear. As there is less downshift involved, running on a higher gear decreases fuel consumption.
Custom tuning allows you to get the exact power and control you want from your truck. It depends on whether you want to race your vehicle, use it for towing, or going on off-road adventures. Each situation needs a different combination of your engine and vehicle components.
By custom tuning, you can recalibrate the speedometer, change your speed limits, RPM and more. Basically, you change the factory settings and tune the engine to suit your driving needs. For example, you can turn your vehicle to a fast car by tuning to get more power and speed.
To get the maximum fuel economy and improve the horsepower of your engine, it’s good to get a programmer installed. It also improves the torque of the engine. Overall, you’ll get better performance from your vehicle.
If you use your pickup to tow other vehicles, transport heavy loads and basically do heavy-duty stuff, a tuner can make the difference. It takes care of the speedometer calibration if you get larger tires. Along with that, it boosts the speed limit and RPMs.
For a more powerful and better drive, a programmer helps.
The name farm jack is often confusing. In fact, most people think that it is only a tool for farm operations. Yes, the device is an excellent solution for a myriad of farming missions.
However, the device is also a decent tool for a variety of other operations. You can use it when you need a tire replacement and for repairing the vehicle outside your farmyard. For its versatile uses, it is an expedient device to keep in the shop, garage, home, and workshop.
Well, this is a complicated question. And while the answer is both yes and no, it is essential to reiterate that the cost of a farm jack does not solely influence the quality of the product. You are likely to find reasonably priced high lifts without breaking the bank.
What directly influences the quality of the device you intend to purchase is its features. Again, depending on the cost of production and customer interests, most reputed manufacturers will reasonably price their products.
Let's be honest! One of the challenges that come with owning a high lift farm jack is an ideal place for storing the device.
When not in use, the best place to store the equipment is an aerated space out of weather elements.
Where do you place it when traveling? Land rovers, Jeeps and other SUVs have a convenient attachment for roof racks at the back. You can, however, use your roof rack or any available space in your boot to keep it stored when you are on the move.
Either way, keep the reversing latch positioned upwards and the handle locked against the standard bar.
Yes! While most jacks have a rust-resistant finish, it is recommended that you use lubricants regularly. Using lubricants keeps off any binding. Moreover, oils make the ratcheting mechanism move smoothly.
When you think that you need to lube the ratcheting mechanism device, make sure to use a light oil. Alternatively, use a silicone lubricant. Lube all movable parts including springs, pins, the bar, and shear bolt for devices.
The chances are that your farm jack will often come back dirty. The first thing that you must do is to give the device a thorough cleaning and let it dry up before you store it.
Scrub using a stiff brush to remove any hard debris and blow compressed air to blast off the crud.
Occasionally, the load may lift unevenly. In such a case, the maximum stroke length of most farm jacks is 100 mm. Every jack conveniently shuts off with the help of a cock valve and make adjustments as they lift heavier weights.
Yes! Farm jacks are incredibly easy to use. Once you understand the operation principles, you are good to go. But allow yourself some time to learn the procedure and cautions first.
There's certainly enough information in the manufacturer's instructions to get you started. You can also do due diligence by watching video clips on the manufacturer's website.
Like every other mechanical tool, durability depends on construction materials, maintenance, and workload. However, the best farm jack models should serve you for a minimum of 10 years.
Consider a jack with heavy-duty cast materials and elaborate maintenance instruments. If you routinely clean and maintain your jack and all its accessories, then you can rest assured of many years of service.
Always take note of the weight capacity rating of your jack and try not to exceed it. Rather, try to underutilize the weight.
However, there are many models without a load rating. Some of these devices without a load rating may withstand a slight overload while most of them will get damaged entirely with the slightest of overload.
Go for a jack with a rating capacity, and keep your operations slightly below the weight limit.
It is a human-powered tool that makes use of a ratcheting system to lift, pull, clamp, and winch loads. Since they feature tall designs, they can raise loads to extremely higher heights that are impossible for other types of jacks to achieve.
A microfiber roller absorbs and holds paint beautifully, leading to few chances for spatter. That being said, microfiber rollers are known to leave lint, so ensure you get a high-quality unit to avoid this problem.
Prepare the wood by washing it. If the surface is rough, use sandpaper to smoothen it out. Then, use the right paint – not too thin or too thick – you want a good consistency.
Then, use a roller to apply it as it works better for avoiding streaks. Don’t press the roller too hard to prevent formation of two lines at the edges.
There are many roller materials from nylon to foam and microfiber. If you want a smooth finish, it’s best to stick to microfiber and foam. For cabinets, you want the thickness of the roller to be between 3/8 and ¾ inches.
If you’re a regular driver who drives within normal speeds of up to 100 mph, you don’t really need a roll cage. But if you usually drive at very high speeds, of over 150 mph, you will be wise to install a roll cage. If you’re a race car driver, you also need a roll cage.
A roll cage bender is a machine, powered by hand, hydraulics, air, or electricity, that bends steel tubing during the construction of a roll cage. It is required that a roll cage has as few joints as possible, so bending is the option.
The idea is to create bends without causing the pipe to break or collapse under pressure
These products can last a lifetime without any problem. But it’s important to keep them safe, to prevent hard impacts that could damage their gears, and never to use the lines close to things that could cut it – so you can add years to your chalk reel.
It all depends on the extent of the lines you make and the thickness of the thread. The thicker the lines are, the more chalk they will use. Usually, an ounce of chalk can last up to a year for light work, and up to a month for contractors with heavy work.
Yes, but it is not advisable. We recommend using only one color per reel, yet some options may offer the ability to mix two types of chalks so you can get a different color to either add visibility or more durability to the line.
Normally, no, as they come with a hook that provides an anchoring ability so you can make accurate lines without further help. However, sometimes you may not have where to anchor the hook, so a second person is the great idea to make it work.
No, you can store the chalk reel however you prefer. Regardless of the position of the product, it should keep the chalk inside and be protected nicely against any potentially damaging exterior factor.
The best place for finding dash cams is Amazon. There, you have a chance to compare different cams and get the best deal.
Each link in our review section will take you directly to a page on Amazon where you can get an amazing dash cam.
In most cases, the 12-V cigarette lighter is the power source. Some dash cameras have a built-in battery.
This functions as a backup power source so that when the vehicle is turned off, and there’s an event that’s worth recording, like another vehicle driving very close to the truck, the camera uses power from the built-in battery to record.
The first thing is to insert the micro SD card. After that, connect the suction cup to the camera then stick it to the windshield at a point where it doesn’t obstruct the driver or the passenger, perhaps behind the rearview mirror.
Then, connect the power cable and wire it through the crevices to prevent it from getting in the way. Run it all the way to the cigarette lighter and plug it there.
Use adhesive tape to keep the wire attached to the truck’s wall.
While we have done all we can to help you find best dash cam for truck drivers by rigorously researching about dash cameras and composing a review, we know our list is not exhaustive. Here are some of the features to look for when looking for a good dash cam:
Lens with a wide field of view (at least 120°)
High resolution – 1080p and above
Clear, smooth recordings even when the truck is moving
The first benefit is that you will have an unbiased eyewitness to back you up in case of an accident or incident. Whether you’re defending yourself before the authorities or trying to justify your claim with the insurance company, video footage can be profoundly helpful.
If that doesn’t convince you, how about the ability to record your journey and view it later? You could capture something newsworthy or even a clip that could go viral.
If you have a fleet of cargo trucks, a dash cam can come in handy for monitoring the vehicles from afar. You will be able to accurately rate the driver and keep them in their best behavior, and you’ll be able to avert theft. Someone trying to break into the trailer will think twice after seeing the camera.
If the camera is GPS enabled, it can help you know the exact location of the truck and once again, this is helpful for fleet management.
Dash cams use power from the cigarette lighter. When the vehicle’s ignition is turned on, the camera automatically starts recording and store the footage in the attached micro SD card. Some cameras have a feature that allows them to overwrite old files when the memory is full; this is called loop recording.
Some advanced dash cams use Wi-Fi to stream the footages directly to an external storage device like a smartphone or PC.
If you notice dark patches on the fence after it gets wet, then chances are that the water is getting absorbed.
This will rot your fence. Also, notice if there are any cracks in the fence. The water might have seeped through such cracks. So, dark patches show that it’s time for staining your fence.
Another reason for water getting absorbed is if the stain or paint has worn off. If you think that the original color looks faded, then that’s also an indication to put on a new stain coat.
If your fence stain is composed of high-quality pigments, the color will stay on your fence longer. These are also better able to ward off harmful ultraviolet rays from the sun.
Moreover, pigments of a good grade can withstand extended exposure to snow, rain and other types of harsh weather.
volatile organic compounds are harmful to the environment as they release toxic fumes. Such vapor also harms humans and animals alike.
Hence, by choosing a low concentration of VOC in your fence stain, you are opting to help save the environment, yourself, and your near ones.
The natural cellulose content in the wooden fence gets oxidized due to exposure to ultraviolet rays from the sun. As a result, the fence turns grey. To prevent your fence from changing its natural color and rotting, use a clear fence paint or stain.
You can get either a water-based or an oil-based fence stain. If you choose the former, you’ll notice that it takes much less time to dry. Some of the water-based stains include very small amounts of zinc. This helps to prevent mildew and mold from forming on the wood.
Water-based fence stains are non-flammable and will not give out any toxic fumes. Some of them will last longer than oil-based stains. However, water-based stains need a proper primer of the fence before you can apply it.
Oil-based stain types are easier to apply and give a smoother finish. They also go deeper into the fence and preserve it well. Such stains take up to two days to dry. Plus, they are flammable and give out toxic fumes, thus requires caution. Moreover, mold likes to feed on oil-based stains.
Fence paint sticks on the surface of the fence, whereas fence stain gets absorbed by the wood. A stain is much thinner than paint and can be applied with a sprayer. You need a roller or brush to apply paint.
Moreover, your fence needs a coat of primer before you apply paint. On the other hand, you just need a good wood cleaner to clean the fence before you stain it. It requires minimal cleaning.
NAS devices are known as personal cloud storage because they offer similar functions of popular third-party cloud storage services like Google Drive and Dropbox.
By keeping sensitive data on cloud-based platforms, your data isn't secured. The servers of such platforms can be broken into or hacked. In such an event, you might lose your data. With NAS, the data is secured by AES 256-bit encryption, login credentials, and various other measures.
Setting up NAS to a network isn't a complicated process. There are multiple ways to connect the personal cloud storage device.
The most common way of connecting the NAS is to link it with your router or switch via an Ethernet cable. Make sure that the devices you will be connecting to your NAS are also connected to your router. This can be through a wired connection, or via Wi-Fi.
Another way is to connect the NAS is by using the software provided by the NAS manufacturer. They usually have mobile applications for iOS and Android, Also desktop applications for macOS and Windows.
Follow this video to setup your NAS: https://www.youtube.com/watch?v=mt0QiI1SPs8
NAS can support various RAID levels for redundancy depending on the model. RAID is used by NAS devices to protect data in the event of a hard drive failure. NAS devices usually have four common RAID configurations. They are RAID 0, 1, 5, and 6.
The most commonly used RAID configuration is RAID 1. In a RAID 1 configuration, the drive where you store your data is cloned in a RAID drive. If you lose data on your primary drive, you will be able to recover it from the RAID drive.
RAID hard drives are specifically designed to be used in a RAID configuration. These are special drives that need to be installed in parallel with other drives. They are used to increase the performance and reliability of data storage.
RAID drives can withstand long periods of data handling that is shared between several drives. They are built a bit differently compared to most conventional hard drives.
NAS devices can be accessed from any mobile device. The manufacture of the NAS has a mobile application that is compatible with iOS and Android devices.
There are also desktop applications for Windows, MAC OS, and other UNIX based operating systems. The application allows you to access the NAS remotely.
An alternative approach is to create a network and an internet accessible drive using ISCSI. After that, you can configure a virtual machine on your PC. This allows you to read and write data into the NAS remotely.
>> We Reviewed 10 KVM Switch For Better Portability
Although they both are storage devices, there are multiple differences between them. NAS has much more storage space than an external hard drive.
Depending on the number of drive bays a NAS has, they can store multiple drives. Also, the storage of NAS can be upgraded according to the user's needs.
NAS comes with RAID configuration, which is not present in external drives. If an external drive malfunctions or fails, you will lose the data along with it. RAID is a failsafe feature that backs up any data you store on the NAS. This means your data will always be safe even if any of the drives in a NAS fails.
In order to access external hard drives, it needs to be connected to a PC via cables. NAS can be accessed by any mobile device over a network.
Furthermore, media content can be streamed to any device using NAS, something that cannot be done using an external hard drive.
The safety of chemical cleaners depends on their composition. First of all, there are two kinds of chemical cleaning products – the abrasive/harsh ones and the eco-friendly type.
The abrasive types contain acids, phosphates, and other ingredients that might kill the plants and wildlife around the house if caution isn’t exercised. It’s normally recommended that you don’t rinse the product to prevent it from flowing down from the roof.
Again, the risk depends on the percentage of the active ingredients in the products. Around 5% is relatively safe.
The eco-friendly cleaners generally don’t pose a threat; they can even be rinsed.
Some folks use vinegar or baking soda mixed with water as moss remover for roof or remove stains and kill fungi. While these products are largely safe, they’re not very effective. You’ll have to do huge amounts of work if you’re to see any results.
Most people prefer using chemicals cleaners because that’s the easiest way. There are abrasive/harsh roof cleaning products, and there are also gentler products out there.
The harsh cleaners work for the most stubborn stains, but they need to be used with care to avoid damaging the roof or killing the plants or wildlife around the house.
Yes, of course, you can go ahead and use water and soap. Some people use a brush and soapy water to scrub the roof clean, going from shingle to shingle. But that’s a long and exhausting shingle roof cleaning process that you might not want to go through.
Others use a pressure washer to blast the surface with high-pressure water. This method often damages the shingles so it might not be an option for many people.
The grime and the biological organisms growing on your roof do more than just ruin the aesthetics; they cause roof deterioration.
Your roof grows weaker, and if no corrective measures are taken, it has to be replaced eventually due to leaks and weakness.
The black stuff that is developing on your roof is likely mold. Those are biological organisms that invade damp surfaces, and they love to grow on stones and wood surfaces.
Discoloration on the roof could also be attributed to mildew, corrosion, dust, and dead organisms including leaves and insects.
The grip handles of a brake line bender can hugely affect your work. If the handles are cushioned and made from vinyl, they will last longer and give you much comfort. If you tend to work long hours with a bender, the grip handles will affect your productivity.
Having good grip handles that are anti-slip will be more satisfying for you. Moreover, to prevent fatigue and calluses on your hands, it’s important to test the handles before you buy a bender.
Make sure you have the right brake line bender as per the radius size of the tube you will work on.
Set up the bender according to the radius size of the pipe. Some benders come with calibrated markings. This will help you to mark the places where you need to make the bends.
Sometimes, you may need to make more than a few bends on one tube. So, a bender with a marking gauge will help you do that. The next step is to align and push inside the tube in the bender.
Now, you can start to bend. When you have reached the point where you have the bend you wanted, dislodge the tube from the bender.
The finest brake line material is copper-nickel and is used by the leading automobile manufacturers in the world.
It prevents corrosion from the salt on roads and is long-lasting, easy to install, as well as dependable and safe. Plus, it’s stronger than copper and withholds rough use.
All brake line benders are not made equal. There are some made specifically to work on thin-walled steel tubing.
There are others that work well on materials like brass, copper, aluminum, and steel. Depending on which type of material you are required to work on, pick the right bender.
For cost-saving purposes and doing minor bending jobs of automobiles, it’s good to use a brake line bender. Besides, you can also use this tool for fixing tubes in your refrigeration system and cooling system around the house.
When you’re out driving, you may face some difficulty regarding gas or fluid flowing in the right direction. With a bender handy, you can fix this type of problem yourself without asking for professional help
Not exactly. This depends on the mode/option you choose on the voltage regulator. You can set it to stay on for a few hours with the auto-timer or opt for the photocell function that keeps it on all night. It will then go off at dawn.
A step-down voltage converter should not be buried more than 18 inches deep. You also don’t have to put it in a conduit like other household cables. It doesn’t have to be that deep, but you should also not place it too shallow that it can be easily damaged by things like a lawnmower. Even 6 inches deep is enough.
Ideally, you should go for wires that have low-resistance and with a heavy coating. High-resistance cables might cause some serious electric shock if they are damaged. There are specific cables that are designed for burial purposes.
No, a low voltage is just as bright as the regular light because the voltage doesn’t affect the brightness. The wattage is what determines how bright a bulb would be. However, LED bulbs will have less wattage but still be bright enough.
That depends on the maximum load of the transformer. They range from around 45W to 600W. The first thing to do is calculate the number of bulbs you have and the wattage rating of each. The total should not exceed that of the voltage converter. If you have 30W bulbs and you have a 300W maximum load transformer, you’ll only need 10 bulbs.
The WD-40 lubricant contains elements for removing rust,but if you need a WD-40 product that is more specialized for rust removal, the WD-40 Specialist Rust Remover should come in handy; it’s one of the most effective rust removers ever.
About safety, the WD-40 Specialist Rust Remover is reasonably safe, but you should avoid inhaling the fumes, as these might be a bit toxic. To ensure your safety, apply the productfrom a well-ventilated area and probably wear some breathing gear.
Yes, of course. To remove rust naturally, you will need baking soda, vinegar, and an aluminum foil. First, soak the stain with white distilled vinegar then sprinkle some baking soda on there. Let that sit for several minutes, then fold an aluminum foil into a ball and use the ball to scrub the stain.
Note that a homemade rust remover will likely work for mild rust stains only. For heavy stains, you will need to use arust remover chemical. Again, this crude method will need lots of elbow grease (for the scrubbing) and time, as you have to prep the rust removal portion. If convenience and effectiveness are what you seek, consider getting a commercial remover.
Rust is normally a result of exposure of metal items to moisture and air. To prevent rusting, you just have to shield the items from moisture and air. It’s not very easy to shield items against air,but you can shield them against moisture. Here’s how you can do that:
Clean and dry your tools after use, then keep them safely and away from moisture.
Keep your car in the garage when you’re not using it, and ensure the garage provides it with adequate protection from rain and dampness.
After using your utensils, be sure to clean and dry them. Leaving them in a sink full of water all day will gradually cause them to rust no matter their quality.
Ensure your bathroom stays clean and dry. After cleaning it, a fan can be very helpful for drying it.
Apply a high-quality paint on your metallic items that are outside the house and unshielded from the moisture. That includes the gate, the fence, and more.
You shouldn't let the foam to dry since depending on the paint job on the car; it can leave stains. There are some cases in which the foam will dry up completely and can be easily removed with a dry cloth.
We believe the online market offers you a much wider assortment of foam cannons from many different sellers than any physical store would offer. And talking of the online market, we went to amazon.com to see what good foam cannons we could find, and after securing and testing several models thoroughly, we came up with a list. We’re positive you will find what you’re looking for in our review.
Did you love the info you discovered here? Why not share it with your friends on Twitter and Facebook? It will hardly take a minute.
The foam cannon shoots thicker foam than the gun. The thicker the foam, the more it is able to hold on to the car’s surface and remove dirt efficiently. Remember, thicker foam is able to lubricate dirt more effectively, and thus it is able to remove it safely without creating swirl marks.
Apart from that, the foam cannon comes with extra fittings for adjusting/optimizing the cleaning process. Because of these and other reasons, the foam cannon is much better than the foam gun.
It’s necessary that a deadbolt fully extends when retracted. Otherwise, the door doesn’t properly lock and poses a security risk. If you are facing resistance when turning the bolt it could be due to interference with the strike plate.
The problem can be resolved by correctly aligning the strike plate with the faceplate. Misalignment can be caused by sagging of the door. Therefore, it's suggested that you inspect the hinges and check if the door is properly hung before making any adjustments.
The cause of the problem could be that the key is unable to shift the levers properly. There are two main reasons why this happens. Firstly, dirt and debris accumulate in the keyhole. Secondly, keys wear out over time and the accuracy of the cuts decreases.
In both cases, the shape of the key doesn't match the levers accurately resulting in more force required to turn the bolt. It is advisable to avoid applying excessive force in such situations. Lubricating the keyhole or using a new key should solve the problems. If the issues persist, contact professional personnel.
Mortise locks need infrequent cleaning and lubrication. Wipe external parts with a damp cloth when necessary. Periodic lubrication of the keyhole, bolts, and latches should keep the lockset in a good condition. We advise you to not disassemble one and attempt cleaning internal components.
Smart types come with a range of additional security features. Pins, passwords and fingerprints scanner make them easier to use and more secure. There are models available and upcoming in the market that have built-in cameras for snapping pictures of the door users.
Improved digital security does not increase the physical protection of a lock. A built-in camera does little help in identifying a burglar trying to break in. Therefore, It’s more important to pay more attention to the physical security aspects.
A reversible lock is simply one that can be fitted to both right-handed and left-handed doors. Purchasing such a lockset doesn’t require you to determine the handing of your door beforehand. You can bulk purchase them for multiple doors that differ in handing.
It’s quite simple to determine the handing to a door. First, you need to face the exterior part of the door. In other words, stand outside the premises the door leads to. If the hinges are positioned to your right, then it is a right-handed door. Otherwise, it’s left-handed.
A single-cylinder has an inside knob and an outside keyhole. This means that no key is required to unlock from inside. Nevertheless, an intruder breaking in through other means will be able to walk out through the door.
Using single-cylinder type on storm doors with glass is not advisable. This leaves an easy way for burglars as they can break the glass and turn the knob inside.
In a double cylinder type, a key is required to turn the bolt from either side. This defeats the security concerns of the former. Self-locking double-cylinders are a double-edged sword. In case the key is missing during an emergency, the door has to be destroyed for gaining access
It is a mechanism that automatically turns the deadbolt when a door is closed. The same task can be achieved with latch-bolts. Such a feature is useful for incidents like when you forget to lock the door while leaving your house.
The 10 and 12-inch saws are the most popular diameters on the market. If you are working on large workpieces, a 12-inch saw is preferable as it delivers wider and deeper cuts. However, if you are working on any workpieces smaller than 2x6 inches, then a 10-inch saw blade will suffice.
This depends on the type of your projects and the requirements. For small projects, you would want a saw that is compact and lightweight. This allows the tool to be carried from site to site. There are smaller miter saws for house use that have the same features as the top tier one at an affordable price.
The best homeowner miter saw usually comes with powerful motor that can cut through the most stubborn materials. However, not every blade support cutting all types of materials. There are blades available for multiple material types.
The materials can be ferrous metals such as steel, non-ferrous metals like copper, and blades for wood. As for the regular blades that come with miter saws, it can easily cut wood and plastic.
In a compound miter saw, the head can tilt to a certain degree. When you tilt the saw head, it enables you to achieve bevel cuts. The head tilts in one direction which is usually to the left. In Dual compound saws, the head tilts in the right and left directions.
The sliding variants are used to achieve a large cutting capacity. It has a railing system that is used to extend the length of the saw, increasing its cutting capacity. This type of miter saw is useful for large workpieces.
Like other power tools, home owner miter saws can be dangerous if not operated with care. The tool has a powerful motor that spins a sharp blade. To eliminate the risks of injuries, the blade is shielded using a blade cover. It also has electric brake that stops the blade from spinning seconds after the trigger is released.
Miter saws must be mounted on a level flat surface. There are tables that are compatible with the tool. The machine usually comes with clamps that allow them to secure tightly. By adjusting the bolts, the tool secures itself to the table.
Newer tools come with a handle that enables you to move them. You can also attach it to plywood pieces for a smooth transfer.
For those sunny days when you want to enjoy a good outdoor experience driving down the freeway. A soft top is much easier to install and remove than a hard top. Another reason for getting it is so you can interchange it with your OE top to slow down the wear.
You want to check the material as this determines the longevity. Sailcloth and twill are some of the most preferred, with twill being better. You may also want to check the color. Some options include black twill, granite gray, black diamond, and pebble beige.
Check whether it comes with everything needed for the installation, like the frame, the bow, the windows, and other hardware.
Yes, a lot. The wrong top might fail to fit, so check your Jeep’s model and year. In our jeep soft top reviews above, we’ve indicated the jeep model that each of the tops is suited for. Again, on Amazon, there’s a part at the top where you enter your Jeep details to see if the product will fit.
They last 3 to 5 years, on average, and some top models like the ones in our reviews above can go for 10 years or more. But remember, the longevity will depend on the maintenance as well.
Proper washing and handling as well as interchanging it with a hard top or another soft top will help you stretch its longevity as much as possible.
Regarding jeep soft top materials, what’s the difference between twill and sailcloth?
Sailcloth is the OE factory top (the one that comes with the jeep). This fabric is lighter and stiffer than twill. Twill is softer and heavier. Generally, twill is considered better.
Most of the top brands are coated with high-quality vinyl that effectively keeps the water out. The Velcro and the overlapping zippers also help prevent leaking.
However, soft tops only keep out the water from light showers. Continuous exposure to heavy rain will wear down the vinyl, and your top will eventually leak.
The essential thing is to clean the dirt that accumulates over time. Use a soft-bristle brush to break off the grit and then use some water, recommended cleaning agent like the bestop cleaner, and a microfiber towel. After that, allow it to dry and apply some protectant.
It all depends on the situation. A hardtop is generally tougher, harder, and more durable. A hard top is what you want to use during winter when you need something to insulate your vehicle’s interiors from the extreme cold or the snow.
Soft tops are better during spring and summer. The advantage is that they’re easier to install and remove, and some come with sunroofs so that you can roll back the upper part and enjoy the open air experience.
It is possible with some world maps but not suitable for all. Some manufacturers produce high-quality maps where they give a particular area for writing and erasing. However, if the map does have lamination on both sides, you may consider it for writing and erasing.
All paper maps are not suitable to carry with you. some of them are ready for carrying and some are not. Maps that come with thick and durable paper are more suitable for carrying. Also, the map should have a tube so that you can roll and store the map on that. That makes easier to carry anything.
In this article, I have given a detailed buying instruction that you can follow. Consider the facts when selecting any product to order. Once you know what you need to consider, now you can either order from the top 10 list of this article or select a different product.
Paper world maps are not expensive. Whatever your budget is, you will find some products within that range. But the quality of the products may vary based on the price. But if you check carefully different products, it could be easier to get the right product with less price.
First, a world map is more about research on a particular region. A paper map is easy to carry, and you get all the locations at a time which is not possible in any app. Though it will take time, you get the real data but with less hassle.
Given the right maintenance, a good ductless unit can last decades, offering the user reliable comfort through proper heating or cooling. At least, a good ductless should last at least 2 decades but remember, it all boils down to the maintenance
Most good ductless ACs go for 700 to around 2500 dollars though there are units that go for over 5000 dollars. Although it makes sense that the higher the price, the better the quality, finding the best is not necessarily about seeking the most expensive. It is rather about examining the features, observing what other users are saying, and actually testing the unit.
Traditionally, the central air conditioning units are known as splits, due to the fact that they have both an indoor and an outdoor component. Ductless ACs also have indoor and outdoor parts, though the entire installation normally takes up less space than the central units. Because of the less space, ductless ACs are known as mini splits ductless systems.
Otherwise known as ductless air conditioners, ductless systems work like central AC units, only without the duct system.There’s both an indoor and an outdoor unit. The indoor unit drives the warm air from the room over the coils, and the refrigerant in the coils absorbs heat from the air and makes it cool before it gets released back into the room.
The price ranges from 200 to over 1000 bucks per side for the lower and upper ball joints. If you got some basic mechanical skills, as well as some time and elbow grease, it’d be better to replace them yourself.
That could reduce the price dramatically as you’ll only need to purchase the joints, without having to pay for labor.
Lift the vehicle with a jackstand so the weight is not on the wheel on the side you’re suspecting has bad ball joints. Don’t loosen any nuts.
Put some pressure on the top of the wheel and see if there’s movement. If there’s movement, that’s an indication that the ball joints are worn out and need replacement.
To be honest, replacing ball joints is not easy. It’s a 2/3 wrench job, needing more than basic DIY skills and tools. On the brighter side, there are lots of video guides on YouTube that can help you complete the process successfully.
All you need is time (a couple of hours), some muscle, and some patience.
When ball joints wear, that leads to problems with the suspension and the steering. If the steering wheel keeps wandering to the right or left, or if there are clunking sounds from the front of your jeep, that might indicate the ball joints are bad. Uneven wear on the front tires is another common sign.
Trying DIY drawer slide installation can be a little challenging. Fortunately, you can expect the best outcome if you implement three simple tips. First, make sure your slides are at the correct height. They should be installed at proper heights of both the drawers and the cabinet. This will prevent issues like overlapping.
Also, the slides must be level on both ends to prevent closing difficulties. Finally, do not make the mistake of installing your slides backward or upside down. Such a concern will ultimately hinder proper mounting of the drawers.
The rails are properly lubricated already, so you do not need to lubricate them. The bearings also help to ensure smooth operation. Adding more lubricant can clog the ball bearings with dust and cause operation failures.
The most important tool you need is a JIG-IT template. It works with a self-centering bit that helps to line up perfectly centered holes. Mounting slides without a template is possible, although using one makes installation faster and easier.
Although both are wrenches, they are used for different purposes. Yes, they have some features in common, and sometimes people use one in change for another. However, the technical procedures of how they work are different.
An adjustable wrench is also called an adjustable spanner, adjustable end wrench or crescent wrench. Basically, an adjustable wrench is made to work with bolts and nuts of different sizes.
It’s an open-ended wrench that comes with a movable jaw. A worm gear mechanism enables the jaw to move back and forth with the help of the thumb.
On the other hand, pipe wrenches are used to tighten and loosen pipes. This one also comes with a hook jaw that can move and a fixed jaw. These jaws are connected by moving a knurled nob. The teeth of the jaws are angled, and they tend to stick to the pipe tightly once attached.
The two tools are also different in case of size. While plumber wrench ranges between 3 inches to 60 inches, adjustable wrench comes between 4 inches to 12 inches size.
There are various uses of a pipe wrench. Some of them can be done with ratchet or socket wrenches, but you can always cash in having a plumber wrench and make the most of it. Here are some of the pipe wrench uses-
For plumbing- Tightening or loosening pipe joints, attaching them together, loosening dull hexagonal nuts, fixing sinks, toilets and bathroom fittings.
For Bicycle and Motorcycles- Tightening fire deflation, loose chains, attaching tires to the body.
Furniture- Attaching furniture that comes packed and unassembled, tightening the varying sized nuts and bolts.
Auto Repair- A must-have for car owners. Comes handy in replacing a flat tire with a new one.
It might sound peculiar because wrenches are known as tools with the easiest mechanism. Well, like other things in life, a little know-how will help you save sweat and time.
A pipe wrench is a clamp-like tool and it comes with two jaws. The lower jaw is fixed, while the upper jaw can move back and forth.
So, to tighten or loosen a pipe, place the pipe between the jaws and in the center. Do not connect the upper hook jaw with the pipe. As a rule of thumb, always keep ½ inch gap between the two.
Once the tube is properly centered between two jaws, tighten the hook jaw until two of the jaws bite properly on the pipe. Make sure the jaws are attached strongly. After that, move the pipe in order to tighten or loosen.
Before jumping into the answer, let us turn your attention to the results of not choosing the right size. Every mechanic who didn’t pick their plumber spanner right has a story of injury, be it scars or bruised knuckles from due to a slippery wrench. Sometimes, the pipe might break and worsen the situation even more.
For someone who intends to build a toolbox for home use, 14-inches would be perfect pipe wrench size. The weight is light and suitable to carry around. As for more sophisticated home and industrial use, an 18 inches pipe wrench should be able enough. Remember, this wrench can work with piping up to 2.5 inches diameter.
If you’re sure you have to work with wider pipes, feel free to choose from bigger sizes. There’s no scarcity of options. You can get sizes up to 60 inches.
If you have to work with varying sizes, choosing an adjustable pipe wrench is the right course of action.
A pipe wrench is sometimes called monkey wrench and these two terms are used interchangeably. But let me give you an interesting piece of information, these two aren’t the same thing.
What causes the confusion is the look. They both look almost identical. However, if you are a DIY enthusiast, you need to know more than that and be able to separate these two.
Pipe wrenches are usually used for tightening and loosening pipes and tube joints. On the other hand, the works associated with money wrench is mainly bolt related works. Usually, they are used to unscrew hexagonal nuts and not pipes.
The monkey wrench comes with jaws that can be opened with a shaft and a bolt. Once you get the desired space, you have to tighten the locknut to start working.
Pipe wrench, also known as Stillson wrench was invented by a mechanic working at the Walworth Company, back in 1869. The mechanic was Daniel C. Stillson. Thus, the tool is called Stillson wrench.
Later, in 1888, a Swedish inventor Johan P. Johansson invented adjustable pipe wrenches. The reason that invigorated him to invent this version is interesting. Back then, the nuts and bolts size standards were poorly maintained. Often, a mechanic would have to go to a job with a full set of fixed pipe wrenches. So the invention of adjustable pipe wrench that can work with different nut dimensions was a need of the hour
Okay, you should keep in mind that the bumper will only protect where it is installed. So, if you install it in front of your car, it will only protect the front side. This leaves the rear end open and vulnerable to dents and damages. As long as you can afford them, don’t hesitate to get both a front and rear bumpers for your Jeep. It is all for your good after all.
Honestly, no. These units have been made to last for long enough. They are normally made of high-grade steel and coated with powder paint. Since they are made of steel, they will not break anytime soon. The powder coating just helps to protect it from rust or corrosion.
No, you won’t get one. Usually, most of the bumpers will not come with a winch. But luckily, most of them come with free D-rings already installed. In this case, you won’t have to purchase some extra D-rings or weld them to your bumper.
Well yeah, you will get some tools, but not all. All you will get are the bolts, nuts, and screws for fastening the bumper or other parts of it. However, you’ll need the appropriate tools for unscrewing and tightening the bumper to your vehicle.
Yes, they do. Both these models come with a similar dimension at the front hence making them compatible with the same bumper. But to be safe, always use the bumper for the suggested Jeep model - unless you make a deal with the salesperson to return it if it doesn’t fit.
Yes, they can. As we stated earlier in the article, you can find some bumpers that come in two versions. One version is for the 2-door, while another is for the 4-door model. But ensure that you check if they have both versions before you buy the bumper.
That they are. They are quite messy, to be honest, but so is any paintwork. Depending on the type you use, the level can vary.
For instance, HVLP guns are usually the least messy. They have a low pressure (like 10 psi) and apply in a high rate of 80%. That means you waste only 20% in forms of bouncing back and overspray mist.
Airless guns are the messiest. Being a high-pressure gun, they have an application rate of 50%. That means half the materials will spread over the air and furniture.
To avoid messy situations, you should paint in a room that has no furniture. That’s the most ideal scenario. But if you can’t do that, cover the furniture and other stuff properly.
t depends on the paint gun and paint type. Usually, oil paints take more time to clean than water-based paints. As for the device, HVLP guns are easier to clean than other types as the paint stays in the gun and doesn’t get into the hose. They usually take 10-15 minutes to clean
Spray tips or nozzle usually come with airless texture sprayers, and the needles are associated with HVLP and traditional compressor guns.
Why are they necessary? Different paints can come with different thickness. Depending on the viscosity, you might need different nozzles for thinner and thicker paints. This way, the paint flows correctly and effortlessly.
Since the nozzle diameter or hole-size cannot be adjusted for airless paint guns, you need just the right size for every job
Yes, you might need to dilute the paint by 10%-20%, but the amount depends on other factors like temperature, material thickness, and power of the device. You should find the recommended amount into the manual.
If you don’t see any instruction regarding diluting percentage there, we suggest you start at 10%. Test the result and slowly add water if needed. Test the result on a block of scrap wood or bag.
It’s not wise to use thick paint as it can hurt the device. A little bit of trial and error and you’ll find the balance
You need to blend the mixture and spend time masking the untargeted areas. This brings the question, does spraying really saves time, even after all the additional masking time?
Well, it does. Spraying is around 5-10 times faster than traditional brushes and rollers. For every additional hour you spend prepping, you’ll save around four hours of time that would have been needed for brush painting. So even with the extra preparation time, you’ll still be saving time by quite a margin.
Using a paint gun is easy. Clear out or cover other stuff in the room so that they don’t get wasted. Blend the drywall compound with water according to the instruction. Make sure you blend them properly, otherwise the nozzle will be clogged.
If you don’t know how to use a drywall texture sprayer, practice with an old piece of plywood beforehand and then start spraying. Stand 3-4 feet away from the wall and start with the top portion. Put the mixture into the hopper and press the nozzle to start applying paint. Spray side by side and make sure no spot remains untouched. If you spray excess paint, scrap it level with a knife.
And yes, take proper safety measures. Use a dust mask, safety goggle, cap, and gloves. Wear old clothes that you can get rid of later.
With the best Silverado leveling kit, you could tremendously improve your ride especially during hauling. Your wheels will no longer touch the fender, so no more rubbing. Moreover, you will find it easier to brake in emergency situations.
Expect to part with 300 to 500 bucks to have a professional install the kit on your truck. If you’re even a bit mechanically inclined, that is an unnecessary cost.
You could just purchase the kit for under 50 bucks and by following the provided guide and watching a video on YouTube, complete the installation in an hour to 4 hours depending on the complexity involved.
Leveling kits have numerous advantages. For instance, they prevent the sagging of the suspension that appears when you operate equipment such as winches or plows at the front of the vehicle. Again, the clearance that it creates makes it possible to fit larger tires without the problem of rubbing against the vehicle’s body.
Yes, it eliminates the rake of your truck, or rather the factory slant that comes with most trucks. And not just that; it provides some good clearance, thereby preventing the tire from rubbing against the vehicle’s fender.
A leveling kit is a product, mostly metallic or hard plastic, that is designed to fit over your vehicles front struts and provide some lift so as to bring the front of your vehicle in level with its rear.
An evaporative cooler uses the natural phenomenon of evaporation to cool a room, using only a fan, water, and cooling pads. An air conditioner, however, uses refrigerants and a compressor, much like a refrigerator, to make the room cool.
It depends on the usage frequency, maintenance and quality of the device. An evaporative cooler of a good brand lasts for several years, provided there is routine cleaning and maintenance before and after usage.
Depending on the size of the room you want to cool, you should select your evaporative cooler. As a rule of thumb, divide the size of your room (square feet. X ceiling height) by 2 to get the CFM or the airflow capacity required.
For these coolers to work, there needs to be an uninterrupted air flow. But if you open the windows all the way, hot air from outside will flow back inside and your room will have too much moisture. You’ll get to a compromising solution after using it for a few days.
Place the portable evaporative cooler near a window and fill the tank with water. Keep the window and a door open. After you turn on the unit, there will be cross-flow of air stream in the room, making it cooler.
It uses the natural concept of evaporation. The fan draws warm air and passes it through moisture-laden pads to release cool air. The pump connects the water to the pads to keep them wet.
The water is supplied either by an external source or internal water reservoir. To provide better efficiency, the best whole house evaporative cooler models can draw as much hot air as it can and pass them through as large as wet areas.
Yes, evaporative cooling is a natural way of cooling down the interior of a home or other larger space. It effectively reduces the temperature by as much as about 20 degrees than outside temperatures.
The market is full of them, but there are only a few types of home evaporative coolers that fit your needs and won’t put a dent in your wallet.
Whether you’re living in a large house or require only one room to be cooled down, an evaporative cooler might just be the solution you’re looking for.
Keeping the needs of those who live in dry and low humidity weather conditions in mind, we tried to give you a comprehensive guide available in the market along with the best whole-house evaporative cooler reviews.
It’s best to remember that evaporative coolers work differently than air conditioners and are much more energy-efficient and cost-saving.
These evaporative coolers come in all shapes and sizes. Depending on your cooling needs and the size of your room, you should pick the one that works best for you.
Wishing you the best on your evaporative cooler shopping endeavor!
I am Oliver, I love helping people improve their house, their car, and their garden. Sharing some useful tips and tricks, buyer's guides, and best-of articles.
9670 46thAve SW
Seattle Washington(WA) 98136