Best LiPo Charger Reviews 2019: Top 10 Picks!

If you are keen on RC vehicles, you probably know that they require batteries to run. With batteries, you also require a compatible charger.

You might wonder ‘Aren't lipo battery chargers the same as any regular chargers?’

No, it is not.

Lithium polymer batteries need special chargers to fuel them. These devices have a variety of modes that ensure your batteries perform at the highest level. They are quite underrated and as a result, it is very easy to get a charger that provides inadequate power to your Lipo batteries.

Furthermore, you don't want a lipo charging unit that negatively impacts your RC experience. To achieve an optimal outcome, you need a device that boosts your lipo’s performance.

Don't worry, we have made the task of finding the best lipo charger easier for you. We have reviewed some of the Lipo charging devices available. This article will help you make an informed decision before committing a purchase. 

LiPo Charger Buying Guide

Compatibility

LiPo charging devices are not made equal. They vary in many different aspects. One of the things you need to make sure is that the charger works with the battery you intend to charge.

It is highly preferred to purchase one that can support a range of different battery types. This way you don't have to purchase another charging device for a different battery type.

Power

The power the unit can deliver varies from model to model. It is an important factor one must consider before purchasing a Lipo charger. The higher the charging power, the better it is for your batteries.

The power is divided depending on the number of ports the device has. Make sure the device supplies enough power to your batteries.

Configurable Features

Some Lipo charging units are easy to operate as they just plug and supply energy your batteries. However, if you want to have control over the device, you should get a device that can be configured to fit your needs.

The best lipo charger allows you to configure various settings. You can select the type of battery you are charging. They can also control the amount of current supplied to the batteries, and the time you want to charge them.

Safety Features

Safety is vital when operating an electronic device such as LiPo chargers. Most of the good lipo charger devices have multiple safety features. They come with various sensors that ensure safe operation. However, not all charging device poses safety measures. 

To stop the device from overheating, they have a temperature cut-off system that prevents the unit from reaching a dangerous temperature. This also prevents the LiPo batteries from getting damaged.

Chargers also come with a time-out feature that stops supplying power to the batteries once it has reached its maximum charge capacity.

Display

when it comes to charging devices, a display is an important component. With a display, you can easily navigate and control various aspects of the device. Backlit LCDs are easy to read in low light situations and make it easy to operate the device.

Top 10 Best LiPo Charger Reviews

1. LiPo Charger Balance Discharger 1S-6S Digital Battery

If you are an RC hobbyist, then you are going to love the B6V2 lipo balance charger. This device is capable of supporting lithium, nickel, and lead-based battery types.

The diverse range of supported batteries means that you don't have to get separate charging devices for each type. This makes it a one-stop solution for all your rechargeable batteries.

The device comes with multiple connectors. DC crocodile clips, Traxxas, Tamiya, EC3, JST, Futaba, XT60, and T-Dean connectors. This makes it useful as you may have to use different connector types to charge different batteries. It is also capable of charging 1S to 6S cell batteries.

This multifunctional RC battery charging unit has a maximum charge power of 80W with a max charge current of 6A.

It has multiple modes for your convenience. The charge modes allow you to configure the voltage and current according to your battery’s needs. With the balance mode, you don't have to configure those settings. It will automatically set the voltage and current according to your battery’s capability.

The device comes with a handful of useful features. They include terminal voltage control, battery resistance checking, storage mode, voltage checking and more. It has all the essential features you require which makes it convenient and versatile. Also, the device will stop charging the batteries once they are done.

Apart from the device and the octopus multi-charging harness, it also package includes a fireproof bag, an AC power cable, and a 15V 6A adapter.

Highlighted Features:

  • Excellent device for beginners and enthusiasts.
  • Comes with a wide range of connectors.
  • Supports multiple types of batteries.
  • Multiple types of charging modes.
  • Compact and easy to carry and store.

2. Tenergy TN267 1-4 Cells Li-Po/Li-Fe Balance Charger

If you are a beginner, you might be looking for a charger that gets the job done at a reasonable price tag. If so, then the Tenergy TN267 is exactly what you are looking for.

This device is very easy to operate. Simply plug in your liPo batteries to the device and it will take care of the rest. It can fuel liPo or Li-Fe batteries that range from 1S to 4S cell count. If you are enthusiastic about RC vehicles such as cars or helicopters that have small or large battery packs, then the Tenergy is ideal for you.

When it comes to the overall shape and appearance, you will find this unit very appealing. Its compact shape allows you to carry and store anywhere. Also, the sleek aluminum case is hard not to appreciate. The LED indicator notifies you about the battery status. This helps you keep track of the charging progress.

You can select the type of battery you want to supply energy to by flicking a switch. Although it does not support a range of battery types, this is perfect for LiPo and LiFe users.

 It runs on a voltage of 100V-240V using an external AC adapter. The device ensures that the energy in each cell of the connected battery is equally balanced.

It is equipped with a range of built-in safety features. Short circuit, reverse polarity, overcharge, and overcurrent are some of the issues the device is safe. You don't have to worry about damaging your batteries during the charging process.

Highlighted Features:

  • Supports both lipo and LiFe batteries.
  • Simple LED indicators let you know the battery status.
  • Appealing sleek aluminum case design.
  • Equipped with built-in safety features.
  • Simple to use makes it suitable for beginners.

3. Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger

The Traxxas 2970 can easily charge your 5-8-cell NiMH batteries. It can also be used to supply energy to your 2S and 3S batteries without any issues.

The Traxxas id feature allows the device to recognize a wide range of iD batteries with a single press of a button. Not only that, the Traxxas iD feature can instantly optimize and control all device settings. This makes operating the device and charging batteries a breeze as you don't have to manually configure the unit.

The unit comes with an integrated balance connector. This is useful as it eliminates fragile balance and connectors. You also won't require external balance boards. This charging unit supports a current range of 1.0 to 4.0 amperes. It has an AC power input, ranging from 100-240V.

The unit’s 4-amp fast charging along with its advanced high-resolution peak detection provides the perfect charge every single time. Also, the built-in balance ports prevent your LiPo cells from skidding.

Traxxas 2970 comes with additional functions that make it easy to use. It features a charging process indicator light. It comes equipped with a fan that cools the unit. Apart from that, the enhanced mode allows you to have full manual control on each of the unit’s settings.

When it comes to the overall design of the device, it is quite appealing. The compact shape of the unit makes carrying and storing easy. Compared to most other devices, the Traxxas 2970 quickly charges your LiPo batteries. This makes the device ideal for any RC enthusiast.

Highlighted Features:

  • Traxxas iD allows you to optimize all settings.
  • Comes with an integrated balance connector.
  • Integrated cooling fan to prevent overheating.
  • Balance ports prevent cells from skidding.
  • Appealing design makes it portable.

4. Keenstone Lipo Battery Charger/Discharger

Keenstone-Lipo-Battery-Charger-500

The Keenstone LiPo battery charger is a practical device that packs an array of features and functionalities. This all-rounder can just be your new favorite to fuel your liPo batteries.

The device comes with several useful connector types. It includes both mini and standard Tamiya connectors, alligator clips, XT60 and exposed wires. The diverse range of connectors allows charging and discharging batteries with ease. It also supports multiple battery types like most other chargers at this price range.

It has an aluminum casing that makes it durable, and the overall compact shape makes it easy to use and store. The device has an input voltage of AC 100 - 240V and DC 11.0-18.0V. It also charges with a maximum power of 100W. It has three crucial modes. Balanced, Charge and Discharge cycle, and storage.

This device has the capability of programming and storing 10 different battery settings. You don't have to reconfigure the settings every time you plug in a different battery. Simply connect the battery, load the settings and start charging. This saves a good amount of time.

One of the standout features of this charger is that it allows up to 5 cycles of continuous balancing and refreshing of the batteries. You may also specific interval times between charging and discharging of the batteries. It is also the best lipo charger for parallel charging.

The fast charge and storage are incredibly useful features. With the fast charge, charging your batteries to their full capacity does not require much time. Storage ensures that you don't lose any stored energy of your LiPo batteries when they are not being used for a long time.

Highlighted Features:

  • Great performance for the price.
  • Supports a wide range of battery types.
  • Stores battery parameters which save time.
  • Various charging modes for all battery types.
  • Comes with many useful accessories.

5. GoolRC B6 Mini Multi-functional Balance Charger

The GoolRC B6 mini is a solid charger for RC enthusiasts on a budget.

This unit is powered using a DC 11-18V power supply. Although the power supply is not included with the product, it is still widely available to purchase. To operate this device, you need to buy a 50W 5A AC adapter.

The device comes with clips that allow you to connect the device with a car battery to use it as a field charging device.

The product has charging options from 1S to 6S. It also has balance charging from lipos that are 2S to 6S. The B6 clone comes with a range of options for charging such as fast, balance, and storage charging.

The B6 can be used for discharging purposes. Users can easily configure the settings to supply energy to their batteries.

This multi-functional charger supports a wide range of battery types. It can provide energy to common lithium, nickel, and lead-based batteries. It supports various connectors to fuel them.

GoolRC B6 have their error codes which are clearly stated on the product manual. The unit has an optimized operating software to make it efficient. It prevents overcharging in case the user did not properly configure the charger. It has a temperature sensor port that allows temperature cut-off.

The build quality of the product is robust. Buttons have a tactile feel to it. The overall size of the unit is impressive. It is small which makes it easy to store and carry.

Highlighted Features:

  • Supports a variety of charging modes.
  • Compatible with multiple battery types.
  • Equipped with many safety features.
  • Settings can be easily configures.
  • Suitable for entry-level RC users.

6. HOBBYMATE D6 Duo Pro Battery Charger

The Hobbymate D6 pro is one of the most complete chargers you will come across. It has dual independent charging ports that allow you to charge two batteries at a time.

It has both AC and DC power input. This means you can power the device directly from a wall plug. The DC source ranges from 6.5V - 30V. This allows you to power any cell battery from a 2S to 6S lipos.

The charger is capable of balancing up to 6S cells. With this device, you can easily adjust the current up to 15A on each channel.

The device has an XT60 input connector that lets you draw power from a bigger battery to supply energy to your lipos. This is useful during field events when you don't have an AC source to power the unit. It is also simple to operate. Simply power on the device, and go to the menus by pressing the shuttle key.

It features a wide range of modes. Each mode supports a wide range of voltage. This allows you to charge, discharge, or store rechargeable batteries. It also supports a wide range of nickel and lead-based battery types.

The device has a large display with an intuitive user interface that is easy to use. In terms of portability, the D6 can almost fit in your pocket. This makes it easy to carry around and store.

The Hobbymate is undoubtedly one of the best RC lipo charger models available, mainly because it has a range of safety features. It prevents the batteries from overheating, short circuit, overcharge and more.

Highlighted Features:

  • Large display with intuitive user menus.
  • DC power allows it to be used as a field charging device.
  • Comes with a range of charging modes.
  • Support a wide variety of battery types.
  • Small and compact shape makes it portable.

​7. Venom 2-4 Cell AC/DC RC LiPo Dual Battery Balance Charger

In the world of charging technology, Venom is a leading brand that has LiPo battery users satisfied ever since 2001. This charger delivers the same level of performance as you expect from any top charger brands.

This 40W unit supports JST-XH 2.5 port connectors. The device has the capability of making use of two to four-cell batteries, which could be LiPo or even LiFe batteries. It can also supply energy to two batteries at the same time. This could be a two-cell LiPo or two-cell LiFe batteries. 

It features a 2.5" display with blue backlighting. The backlighting allows the user to view the screen readings in any lighting conditions. The display shows important readings, such as cell count, cell type, and the charge remaining on the connected cells. The compact shape also makes the device easy to use and handle.

This unit is capable of supporting a current range from 0.1 to 3 Amperes.  It has both AC and DC power inputs, with the AC voltage range of 100-240V and DC voltage range of 10-18V. It also has a current drain balancing rating of 300mAh per cell.

This device is packed with multiple useful features. It automatically shuts off charging when the charge on battery reaches maximum capacity. The device also comes with temperature protection. This feature stops the unit from overheating. It also prevents damaging the batteries that are being charged.

Highlighted Features:

  • Great option for entry-level RC enthusiasts.
  • Large 2.5” LCD backlit screen.
  • Small and compact shape makes it portable.
  • Variety of charging modes for batteries.
  • Comes with multiple safety features.

8. Venom Pro Duo X2 Dual AC/DC RC Battery Balance Charger

Venom Pro Duo X2 Dual AC/DC RC Battery Balance Charger

When it comes to ease of use, the Venom Pro Duo 80W X2 is a RC lipo battery charger that raises the bar. It has a rather unique design compared to other charging devices. The vertical design saves space and makes it easy to use. If you are looking for the good quality lipo charger, then this may be it.

The Venom Pro supplies the power demanded by serious racers. It has two charging circuits, both separately have their own integrated 80W power supply. The charger is compatible with a range of lithium, Nickel Cadmium, Lead Acid, and metal hydride based batteries.

The package includes commonly used connectors such as XT60, Deans, and Tamiya.

This dual lipo charger has sufficient transformer power to charge two batteries simultaneously at 7 amps each. With this device, you can effortlessly supply energy any compatible battery up to a 6S LiPo.Like most other charging devices, this has an input voltage of 11.0V - 18.0V DC or 100V-240V AC.

The unit has several types of charging modes. It has balance, fast, and storage charges available for all lithium-based battery variants. With the Fast mode, your batteries get charged very quickly.

The storage mode allows the batteries to charge or discharge until the batteries reach a 50% capacity. This is essential for extended downtimes.

If you are charging nickel-based batteries such as NiMH or Ni-CD, the device allows you to configure the peak sensitivity independently for the connected battery types. It also has a 1-amp discharge rate for nickel-based batteries, with configurable waste time in between the charge and discharge cycles.

The interface of the Venom pro is a backlit LCD screen that is bright and shows clear readings. The device is also equipped with 5 buttons, which is used to navigate through different options. The device can also save 5 different battery profiles, which saves time.

Highlighted Features:

  • Features an independent charging circuit.
  • Unique vertical design saves space.
  • Supports a wide range of battery types.
  • Bright backlit LCD shows clear readings.
  • Multiple charging modes for any battery types.

9. HTRC LiPo 2S-3S Balance Battery Charger

The HTRC is a small and compact LiPo charger. It is an affordable option for those who don't need an expensive high spec charging unit making this suitable for small batteries.

This compact unit is compatible with 2 cell and 3 cell batteries. Unlike most other devices, this only supports LIPo batteries. It has an AC input of 100-240V. Since it’s a balanced charger, it will fuel all 3 cells at the same level at 4.2V.

It also has a low charge current of 800mA. It also fuels the batteries at a good voltage level. This helps prolong the life of a battery as you don't have to worry about the cells getting hot by overcharging. This allows the battery to last more cycles.

The 3 LED indicators display the charging process. If the LED is red, the cells are charging. A green led light indicates the batteries are completely charged. The 3 LEDs are for each battery cell. This way you can keep track of the status for each cell.

The balance port allows the monitoring of the cells individually. One of the missing features of the HTRC LiPo charger is the lack of discharging mode. However, if you are only using this for charging applications, this will get the job done.

To operate this device, you do not need an extra power adapter. It operates using a simple power plug that connects directly to the socket. This makes the unit easy to store and makes it portable as well.

Highlighted Features:

  • The affordable price tag makes it appealing.
  • 3 LED indicators that let you know the cell status.
  • Balance charging feature allows all the cell to receive the same voltage.
  • Suitable for entry-level RC users.
  • Uses a simple power cable to operate.

10. B3 LiPo 2S-3S Battery Balancer Charger

The RC B3 LiPo battery charger is similar to HTRC 2S-3S in many ways. It is small, compact and easy to use. This unit is perfect for any entry-level RC hobbyist, who just want to fuel their LiPos. It is primarily for those who don't need advanced features found in other expensive LiPo Charging devices.

This unit can only supply energy to 2 cell and 3 cell batteries. Furthermore, it is compatible with LiPo batteries. It has an internal AC switch power of 100-240V integrated inside the device. Since the device supports balanced charging, it provides energy to all 3 cells equally with the same voltage level.

The device has 3 LED lights which enables you to keep track of the charging process. A red-colored light means that the cell is being charged, whereas a green color indicates that the battery is fully charged.

The high precision balance circuit supplies a current of up to 850mA. Also, the batteries charge at a great voltage level. This is essential as it does not cause the batteries to overcharge and heat up. Your battery life is also extended, as it allows them to last more cycles.

The device has a separate balance port of each of the battery packs. The balance port helps to access the individual cells inside the battery so they all receive the same voltage level.

The device doesn't require a power adapter to operate. It uses a simple power cable that connects to the socket. This makes the set easy to carry and store.

Highlighted Features:

  • Simple and easy to operate.
  • 3 LED lights that show cell status.
  • Balance charging capability ensures cells receive the same voltage.
  • Requires a simple power cord to operate.
  • Simple functionality makes it suitable for beginners.

​11. ISDT T8 Battgo Lipo Battery Charger/Discharger

ISDT T8’s unique design, features, and exceptional performance are what makes it the best lipo charger in the market.  What sets it apart from other charging devices is the use of BattGo technology, making it the first device to support it.

This monster can easily parallel charge 23 1300mAh Lipos simultaneously. The T8 is also capable of supporting 7 types of batteries and up to 8S batteries. It has a max power output of 1000W. This value will reach if you are charging 8S batteries. A battery with a lower cell count will be limited to 30A.

This multi battery lipo charger has a maximum discharge capacity of 20W, with a balancing current of 2.2A per cell. It has two outputs. This allows you to plug in multiple LiPo batteries or parallel charging ports at once.

It features a 2.4" IPC LCD that is better than most charging devices with two-line backlit screens. The intuitive menus make the interface fun to use. For navigation, the T8 has 4 buttons with a select button in the center. Although the device is made of plastic, the build quality is excellent.

The BattGo compatibility makes you aware of your battery's condition. The device uses a special XT60 connector called an XT60i. It has an extra pin that makes it possible to track your battery performance. It also stores your battery’s performance data.

The T8 is a solid all-roundd battery charging device. It is the most powerful in the series and is perfect for beginners as well as RC enthusiasts.

Highlighted Features:

  • Monster of a device with a large power output.
  • Large 2.4" LCD instead of backlit.
  • BattGo technology allows you to track your battery condition.
  • Navigation is easy with physical buttons.
  • Made using great quality materials.

Benefits of Using Lipo Charger

Features

The top lipo chargers are rich in features. Apart from charging, you will be able to use the devices for other purposes as well. With the device, you can discharge, balance, control the voltage and charge current supplied to the cells. Having more features allows you to better maintain your batteries. 

Compatibility

The finest Lipo chargers usually support a wide range of battery types. This becomes useful as you may have to fuel other types of batteries such as li-ion, NiMh, and Ni-Cd. Depending on the price, they can also support low to high cell batteries.

Easy to use

It is very easy to operate. Simply plug in the connectors, set the configuration according to your needs and start the charging process.  They are also portable, which makes them easy to carry around and store.

Safety

Chargers come with a range of safety features that keeps the battery from getting damaged. For instance, most charges come with a temperature-cut off feature that automatically stops the charging process once it has reached a certain temperature.

Types Of LiPo Battery Charger

Types Of LiPo Battery Charger

Lipo battery chargers are specially designed to charge LiPo batteries. Most Lipo charging devices support a range of battery types. However, plugging a LiPo battery to a non-LiPo charger can be dangerous. They are mainly composed of two types.

4-button Smart Charger

As the name suggests, these chargers are controlled using 4 buttons. They are usually small in size and are effective at charging different types of batteries. It comes with a small display that allows you to see the configured settings.

These devices support multiple battery types. Namely Lithium polymer, nickel-metal hydride, nickel-cadmium batteries and more. It also possesses the ability to charge or discharge batteries to a specified voltage. 

To use the device, you first need to select the type of battery that needs to be charged.  The charger settings have to match the numbers of the connected battery.

Then select the current and the voltage based on the battery specifications. After that initiate the charging or discharging process by pressing the ‘START’ button.

Balanced Charger

Balanced chargers are similar to 4-button smart chargers with some distinguishing functions. They can charge cells to 3.8 volts. However, they don't have a discharging capability.

Balancing is an important feature, especially with 3 cell 11.1-volt batteries.  Each of the cells can store varying levels of energy which may decrease the overall lifespan of the battery.

A balanced charger ensures that the cells contain equal levels of charge. It is not a problem for 2 cell batteries as they are unlikely to have balancing issues.

These chargers treat multi-cell batteries as a single cell. Any differences in charge levels of the cells are quickly equalized.

Tips To Use Lipo Charger

Lipo chargers come in various prices, features, and functionalities. Getting you hand on the best lipo charger isn’t enough, you would want the device to function as effectively and efficiently as possible. Here are some few tips in which you can do so-

Compatibility

Always use the accessories that are provided with the set. You can also use similar or compatible accessories. Usually, they compatible accessories and batteries are mentioned in the product description or the packaging.

Some accessories may seem similar but they are completely used for different purposes. For instance, a laptop power adapter will not work with lipo charging devices even though they are quite alike.

Research Is Key

It is essential that you properly research the product before making a purchase. Cheaper chargers may damage the cells causing you to buy a new set of cells. A good quality Lipo charging device may be expensive, but it will supply energy to the batteries effectively. It will also allow them to last more cycles.

Gain insight about the product you are going to purchase. As not all Lipo charging devices may not work the way you expect them to.

Charge Rate

A battery's maximum charge rate is the highest rating at which they can be charged. As the charge can be set from the device, a high rate will significantly shorten the life of a battery. Charging the battery at a lower rate is safe and will increase battery life. You should never charge a Lipo greater than 1 times its capacity.

Battery Balancing

Balancing is a must on any battery that contains more than one cell. It keeps all the cells within the same voltage level, so it won't damage your battery pack. Balancing is a must to increase the longevity of your battery pack. Make sure you utilize this feature.

Safety Consideration That You Should Look When Using Lipo Charger

Safety must always be a top priority. Apart from checking the respective Lipo charger reviews, you can follow some safety tips to use the device safely.

Always Be Present While Your Battery Is Charging

Good liPo chargers are robust devices. They are designed to be fault-free and last a long time. This, however, doesn’t mean that you use the unit unattended. Be sure to regularly check if the device is getting warm. If the charger or LiPo batteries get too hot, stop charging them immediately.

Don't Charge Batteries That Show Signs Of Damage. 

LiPo batteries are durable, but they do wear out over time. If the cells are deformed or puffed up, they may be damaged. By charging them, you might eventually damage the chargers.

Use The Device In A Fireproof Area Or A LiPo Bag.

Use The Device In A Fireproof Area Or A LiPo Bag.

LiPo Bags are usually fireproof. Using the charger at a location where fires can easily be put out adds an extra layer of safety. You may also keep a fire extinguisher nearby to put out any fires that may cause due to a damaged charging unit.

Although LiPo fires are hard to put out, they will certainly stop any fire from spreading.

Don't Use The Device Near Flammable Items Or Liquids.

Always use the device in a safe or even isolated place. Some items we use are unknowingly flammable. Fires may start in case the device malfunctions or the batteries get damaged. Flammable objects will make things worse by increasing it.

Use The Correct Configuration.

When using the device, you have to make sure that the settings are correct for the LiPo batteries being charged. Most charging devices support various types of batteries such as Li-ion, Li-Hv, NiMH, Ni-Cd to name a few. They usually require different settings. Make sure to use the correct configuration to safely operate the device.

Frequently Asked Questions A Bout Charger For LiPo

1. What Is Balanced Charging?

Balance charging is a feature found in most chargers. Balance charging is a technique that improves the cell's longevity. The way it works is that the charger will for the same voltage level for each cell in your battery pack

If the voltage of any cell is above or below the required voltage, there is a chance the battery would get damaged.

2. What Is Fast Charging?

The best RC battery charger models often come with this feature. As the name suggests, this feature supplies energy to your battery quickly and saves time. The way this process works is that it skips the balancing step.

It pumps current into the batteries quickly before reaching its peak voltage. With this process, you can get to use your RC vehicles faster.

3. Is It Alright To Charge The LiPo Batteries Overnight?

You should not leave a LiPo battery when the charging process is taking place. Although these batteries are reliable, they may still puff, smoke, and catch fire. If a scenario like that occurs, you have to handle and contain the situation before any damage is caused.

4. What Is The Lowest Safe Voltage For LiPo Batteries?

The average voltage for LiPo is 3.7V. They can be easily charged up to 4.20V, whereas the discharged voltage is 3.0V per cell. If the voltage is anywhere lower or higher, the cells inside the battery can get damaged.

5. Can LiPo Batteries Explode?

LiPo batteries do tend to explode. It most likely happens if proper care of the batter is not taken. Overcharging, short circuits, punctures, and other external damage may lead the battery to explode.

6. What Does The C-Rating On The Batteries Mean?

The C-rating on batteries is the measure of the rate at with the battery discharges. A discharge rate of 1C will provide the rated capacity of the battery in approximately 1 hour.

7. Is It Possible To Use LiPo Batteries While It Is Being Charged?

It is possible to use them while charging. However, it is not recommended. Using them in that state may compromise the safety of the battery as well as its lifetime.

8. What Amp Should LiPo Batteries Be Charged At?

This varies depending on the type of battery being charged. For a 3000mAh battery, you want it to charge it at 3A. For 5000mAh battery, the device should be configured to 5A and so on.  The charge rate for the safe charging of LiPo batteries is 1C.

9. What Is The Process Of Charging A LiPo Battery?

Charging LiPo batteries is not a complicated process. Charging them usually involves four basic steps. The first step is to plug in the charger and the balance leads between the battery and the device. Then use the navigation buttons, or touch screen selects the charging mode.

After that configure the cell count, voltage and charge rate. Then press the ‘Start’ button to begin the charging process. Make sure you don't leave the charging session unattended.

10. What Is The Advantage of Using LiPo Compared To Using Other Rechargeable Batteries?

Compared to other batteries such as NiMh or Ni-Cd, LiPos have four times more energy density. They are also lightweight and pliable. LiPos can also be made into any shape. Also, they are resistant to damage compared to other rechargeable batteries.

Final words

Batteries have come a long way over the decades, so are their chargers. As time progressed, batteries became more complex. Everything from their design, chemical composition, and the amount of energy they hold improved exponentially.

Chargers are the devices that supply batteries the energy they store. High-quality charges will indeed provide you excellent service. The bottom line is, you should be economical when purchasing a lipo charger. Using a decent lipo charging device will keep the integrity of your batteries and make them last longer.

Whether you are an RC enthusiast or a beginner who bought a new RC car, you need a proper charger to fuel those batteries. In this article, we reviewed some of the best lipo charger models available. We hope this guide helps you to find the ideal Lipo charger that suits your needs.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: