Imagine that you know that your jeep door is either poorly fitted or has rusty fields in certain places. You look for an alternative safety measure when you get down or getting into your vehicle. This is the point where you want to have a grab handle.
A grab handle is a safety tool which can be easily installed on your jeeps. It helps you to have a firm grip so that you can move in and out of the vehicle without slipping.
Let us look at some of the best jeep grab handles available in the market and how good they are or how do they outlast their competitors.
TOP 5 Selection For A Quick Decision
Our Top 10 Best Jeep Grab Handles Reviews
Now that you have an outline in selecting jeep grab bars let’s walk through some excellent products which will appeal to your requirements.
1. Front Grab Handles Grip Handle Grab Bar for Jeep Wrangler JK JKU Sports Sahara Freedom Rubicon X & Unlimited 2007-2018
Worried about the wearing of the seat while you slide in and out of the vehicle? You need not worry now. The front grab bars from Dante will quickly resolve your daily issues.
The first thing is that the bar is made of durable material which is quite sturdy. You can immediately feel the difference when you touch it. It is made of ¾ inches solid steel which is very tough in handling the weights.
It does not sway back and forth as low-quality jeep safety bars. It is thoroughly tested with numerous vehicles for compatibility and strength. It is coated with a powder for protection of UV light.
The black layer rubber grips give firm grip when you hold the bar while entering or exiting the vehicle. You need not drill any additional holes for fitting these bars. They fit directly into the OEM holes of your truck.
Similar to all front grip bars, the Danti handles will also block sun visors completely from extending into the windshield.
The safety bars can be installed on all jeep wrangler JKU models starting from 2007 to 2018. The set weighs just 4.5 pounds which makes it easy to install on your vehicle.
The package contains 1x Installation Instruction, 2 x black front grip bars, 4 x steel mounting bolts, 4 x steel mounting nuts and it has a lifetime warranty.
You can fit these bars on Jeep Wrangler JK, JKU, Sports, Sahara, Freedom, Rubicon X & Unlimited X 2/4 door Roll Bar 2007-2016.
Highlighted Features:
- ¾ inch solid steel rods
- Anti-skid support
- Rubber grips
- Powder coating for protection from UV light
- Directly fits in OEM holes
- Lifetime warranty
2. AUTOSAVER88 Grab Handle Roll Bar Compatible for 2007-2018 Jeep Wrangler JK, JK Unlimited
A good grab bar isn’t about just helping you to get in and out of your vehicle. It must improve the looks of your jeep too. The Autosaver’s grip bar is one such tool which offers great ergonomics and looks.
The bar is made of aluminum alloy which is extremely rigid. For additional safety, the bar is provided with dual rubber grips for comfortable holding. The bolts and the rod in the package are powder coated to protect them from the sun (UV rays), rust, and corrosion.
The bars can be installed directly into the OEM holes, and you need not drill any additional holes. It bears weight as much as 175 pounds and helps you to get in and out of the vehicle quickly.
It improves the functionality of off-road vehicles and allows you to drive in various conditions. It offers superb grip while you drive down the trail enhancing the safety of the driver and the passengers.
The package contains 2x front grip bars (left & right), 2x rear grab bars (left & right), 2x long screws, 2x short screws, and 4x sleeve nuts. The entire set weighs around 4.75 pounds.
You will have a lifetime warranty on this product and can be installed on 2007-2017 Jeep Wrangler JK &JK Unlimited 4 Door.
Highlighted Features:
- Excellent looks and functionality
- Made of ¾ inch solid aluminum alloy
- Great safety handle for off-road vehicles
- Protection against UV rays and corrosion
- Rubber grips
- Lifetime warranty
3. 4 x Roll Bar Grip Handle for Jeep Wrangler YJ, TJ, JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, X & Unlimited 1995-2018
‘Good things come in small packages’
You have heard this saying plenty of times. Not all safety grip bars must be large or made of metal. They can be small and non-metallic too.
From Danti, comes the ultra-durable, water and dust resistant canvas handles which are perfect for various wrangler models.
Made of high-quality abs and canvas, it can bear enormous pressures without falling apart. The interesting thing about this product is that it can be installed by simple stropping. It has loose straps with which you can fit them in a convenient place of your vehicle.
Just mount them on sports bars using two fully adjustable nylon web straps with hook and loop fastener. The nylon webbing on the handles will provide all-weather protection.
Compared to other solid or metallic grip handles, they are incredibly cheap and are as good as the metallic bars. There is no issue of sun visor blocking with these handles.
You can install them as the front, and rear equipment providing safety to everyone in the vehicle.
Another great perk of these bars is that it can be installed on all jeep wrangler models of all years. Each bar weighs 1.12 ounces; feathery light isn’t it!
Highlighted Features:
- Ultra-premium nylon webbing design
- Easy installation
- Can be installed on all jeep wrangler models
- No visor blocking
- Super lightweight
- All-weather resistance
4. Hooke Road Solid Steel Front Grab Handles for 1997-2006 Jeep Wrangler TJ & Unlimited
If you are looking for grab bars designed for a specific model of jeep wrangler, then Hooke Road black steel front GraBar is for you.
It is designed specially to fit 1997-2006 jeep wrangler, TJ, and Unlimited. These front metallic bars will make it make it easy to get in and out for the passengers or drivers who use the wrangler mentioned above models.
The bars are made of ¾ inch solid steel which can take loads of pressure (weight). Its strap design helps to hold the bar securely in its place, and contoured handle enables a firm grip to move in and out of the jeep. They won’t sway back and forth under pressure.
The bars are universal and adjustable which means they can fit on any round or square padded or unpadded bar. You can install them with a T40 Torx wrench on most of the models. Drilling is required for 2004-2006 Wrangler TJ.
The package contains 2 x Hooke road jeep wrangler roll bar safety handles and weighs just 4.7 pounds. You will get a limited two-year manufacturer warranty.
Highlighted Features:
- Stylish looks
- Superb ergonomics
- Fits most of the Wrangler models
- Universal and adjustable bars
- Two-year manufacturer warranty
5. Badass Moto Gear Jeep Wrangler Grab Handles for Roll Bar 2 Pack
The name of these bars is very intriguing, and they live up to it. The Badass jeep wrangler grab handle bars are one heck of a badass.
They are designed to sustain intense pressure. The stylish design looks great with red accent and pink grip. It fits perfectly well in your hands. The company promises it can support the weight of a sumo wrestler since the bars do not bear the full burden of a person.
The handlebars are suitable for Jeep Wrangler (1955-2016), Unlimited, Sahara, Rubicon, TJ, and JK.
These roll protection bars fit most other jeeps including the all-terrain vehicles (ATV) and utility terrain vehicle (UTV) along with pre-Millennium Jeep models (2000-2018).
You can fit these bars by strapping them around bars of the vehicle. They are made of high-quality nylon fiber. The bars are all-weather resistant and will survive to different climatic changes. It has triple-banded nylon fibers for enhanced security.
The package weighs around 12.8 ounces, and you will get five-year manufacturer warranty for the item.
Highlighted Features:
- Stylish design and looks
- Great functionality
- All-weather resistance
- Triple-banded
- Five-year manufacturer warranty
6. OxGord Roll Bar Grab Handle Set for Jeep, UTV & ATV Gear (Pack of 2)
Another set of roll bar grab handle set for your jeep wrangler is the OxGord roll bar handles. These bars offer great functionality helping the driver or passengers from getting in and out of the vehicle.
These devices (equipment) can be strapped around most of the bars measuring from 1½ to 3 inches in diameter. These bars are made from high-quality weather-resistant nylon and industrial grade Velcro, for a long-lasting and secure fit.
They can survive extreme weather conditions without swaying back and forth when pressure applied.
The set contains two (2) roll bar grab bars, one (1) for the driver side and one (1) for the passenger side. You can fit them on padded and unpadded bars.
These bars are not only to help children and the elderly with getting in and out of an elevated vehicle, but they provide additional safety for you and your passengers in case of an emergency or when making sharp turns.
Each unit weighs around 9.8 ounces, and you will get one-year manufacturer warranty. The company offers a compatibility checking system with which you can check if these grippers can fit your vehicle or not.
Highlighted Features:
- Superior strength
- All-weather resistance
- Made of high-quality nylon and industrial grade Velcro
- Can fit on both padded and unpadded bars
- One-year manufacturer warranty
7. JeCar Grab Handle Inserts Cover, ABS Front & Rear Door Jeep Wrangler JK 2007-2018 (Black)
If you are looking for grab handles which have unique looks and sturdy functionality, JeCar front, and rear handlebars are for you.
These eye catching devices are red in color and will give a stylish look for your vehicle post installation. They are very sturdy and will help the passengers or the driver to get in and out of the vehicle with ease.
The bars are made from high-quality steel and aluminum alloy which are resistant to rust and corrosion. Their streamlined ergonomic design offers a better grip while traveling down the trail.
There is no need of drilling additional holes, and they fit perfectly in the OEM holes of your vehicle. The bars will not limit your sight or necessary operation while driving but note that they will obstruct the sun visors from extending completely to the windshield.
The package contains two front and rear grab bars. You can fit them on 2007-2018 Jeep Wrangler JK Unlimited 4 Door (Sport, Sahara & Rubicon).
The company offers a limited warranty on the parts, and it varies depending on the type of vehicle it fits on. You can contact the manufacturer about the warranty details.
Highlighted Features:
- Sturdy aluminum-steel alloy rods
- Resistant to rust and corrosion
- Fits in OEM holes of the vehicle
- Fits a wide range of jeep wrangler models
8. FULLELE Grab Bar Front Handles for Jeep JK Wrangler Rubicon, Sahara, Solid Steel Version Unlimited 2/4 Door 2007-2017
The Fullele grab handles are designed for the front bar which offers superb quality grip and safety while you get in and out of the vehicle.
The bars are made of ¾ inch solid steel and offer all year performance. It comes with two rubber grips for an enhanced non-slip hold. You can install them into the OEM holes with the help of grade 12 steel mounting bolts.
The bar will fit on 2007-2017 Jeep Wrangler JK includes Rubicon, Sahara, Sports Models. It also fits all two-door and four-door models for above applications.
Front Grab bars will prevent your sun visors from extending entirely to the windshield. However, the screen can easily be pulled towards you to allow for full blockage from the sun glare.
The package includes 2 grab handles (left & right), 2 long screws, two short screws, four sleeve nuts, and 1 English instruction manual.
These safety bars are perfect for getting in and out of your Jeep, or for holding on while going down a trail. You will get a limited lifetime warranty with the package.
Highlighted Features:
- Solid steel-aluminum alloy rods
- Fits into OEM holes
- Rubber grips for non-slip hold
- All year weather resistance
- Lifetime warranty
9. Opall Front Door & Back Door Aluminum Grab Handle Cover For 2007-2018 Jeep Wrangler JK & Unlimited
Apart from offering a good grip and safety, the grab bars will be great if they change the looks of your vehicle. If you are looking for a safety handlebar which will enhance the looks, then Opall aluminum grab bar cover is for you.
It can fit Jeep Wrangler JK and Unlimited 4 Door 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, but not for 2018 JL.
The covers will prevent your Jeep from future fingernails; keys scratches etc. These handle trim bar colors are colored in red that is fashionable, beautiful and artistic and upgrades your Jeep appearance.
The center of the grip handles has a notch which provides perfect grip for the handle. It is made of aluminum alloy which is corrosion resistance. You can install these covers in less than two minutes.
The screw fitting design seamlessly adapts to most of the bars and are better than adhesive sticking ones. It’s an exquisite and glossy surface that offers you comfortable hand feeling.
Each unit weighs just 0.8 ounces and offers 18 months warranty.
Highlighted Features:
- Superb looks and design
- Beautifies the looks of your vehicle
- Prevents fingernail scratches
- Easy installation
- Rust and corrosion resistance
- 18 months warranty
10. Yescom 4X Front and Rear Grab Handles for 07-16 Jeep Wrangler JK 4 Doors
These solid metal bars will not only provide safety for the people in your vehicle but also gives stylish, sleek looks.
The Yescom front and rear safety bars are made of high-quality steel. These solid bars will offer perfect non-slip hold with the help of rubber grips. The rods are rust and corrosion resistant which will last all year long.
You can fit the bar into the OEM holes without the need of drilling holes or welding.
The package contains 2 front and 2 back safety bars, 4 Hexagon connectors, 8 Screws, and instructions manual and the entire package weighs 12.4 pounds.
The set is available in two different colors, i.e., black and red. You can fit these bars on 2007-2016 Jeep Wrangler JK 4 Doors.
Highlighted Features:
- Excellent looks; stylish and sleek
- Solid steel rods which are rust and corrosion resistant
- Available in two different colors
- Rubber grips
11. GPCA GP-Grip PRO Grab Handle for Jeep Wrangler JL JK Sports/Sahara/ Freedom/Rubicon X Unlimited X 2DR/ 4DR 2007-2019 w/ 3″ Padded roll Bars (Universal to Front/Backseat)
Padded roll bars are increasing in popularity because of their easy installation and portability. GPCA GP-Grip Pro grab handle is one such safety bar which can be installed on any bar most vehicles.
The roll bar is built with aero-grade high-quality aluminum which will provide safety while you get in and out of the vehicle. It also offers good grip during your journey down the trail. The cushioned handle wraps provide another layer for a comfortable grip.
Unlike other grab bars which are fixed in position, these bars are foldable. You can fold the handle so that it won’t block your vision or even sun visors.
The signature bandana shaped handle has built-in inner pockets to safe keep your keys, cards, etc. It also has quick, accessible outer pouch for emergency tools, lights or sunglasses.
With quick and easy installation, you will soon experience a solid and sturdy grip for all your rides on/off the road, or just getting in/ out of the Jeep. These bars are built with outdoor-grade materials. Wipe clean occasionally for long-lasting use.
The package includes one set of the aluminum handle, handle base with inner pockets, outer Pocket, handle cushioning warp. The bars can be installed on Jeep Wrangler JL, JK, Sports, Sahara, Freedom, Rubicon, X, Unlimited, X 2DR/ 4DR 2007-2019 models.
Highlighted Features:
- Aero-grade aluminum metal bars
- Additional accessories such as inner and outer pockets
- Can be installed in most wrangler models
- Flexible hands to allow sun visors to extend up to the windshield
- Quick installation
12. Rough Country 6501 Black Steel Grab Handles Front Compatible w/ 2007-2018 Jeep Wrangler JK
For easy access to get in and out of the vehicle and a solid steel high-quality steel rods, you can opt for the grab handles from Rough Country.
The handles are incredibly heavy-duty and are very easy to install. You need not to drill holes or weld them to the bars of your Wrangler. They will fit directly into the OEM holes.
The vehicular safety bars are redesigned for sturdiness and are made of 7/8-inch-thick steel with rubber grips. The rubber grips have company logo branded on them. Along with the rubber grip, the bars offer a comfortable grip for more extended period.
The grab bars will fit on 2007-2018 Jeep Wrangler, JK2007-2018 4WD Jeep Wrangler, and JK Unlimited. Make sure you check the tightness of the screws every 500 to 700 miles to ensure the safety.
The package includes two front and rear grip handles, mounting hardware which includes mounting bolts. Package weighs around 6.09 pounds.
Highlighted Features:
- High-quality steel
- Fits in OEM holes without the requirement of drilling or welding
- Rubber grips for a no-slip grip
- Fits on most of the Wrangler models
13. Iparts New Aluminum Grab Handle for Jeep Wrangler JK 07-17 2/4 Door
With a premium quality aluminum metal, the Iparts grab handle will offer outstanding safety while you get in and out of the vehicle. They also provide superior grip while traveling down the trail.
The bars are coated with powder to protect them from sunlight, rust, and corrosion. You will not only get a fantastic grip with these bars but also enhanced looks of your vehicle.
You can fit them in the OEM holes of your vehicle without the need of drilling holes or welding them.
IParts aluminum safety bar fits for Jeep Wrangler JK Rubicon Sahara Sport 2/4 Door 2007-2017 Models.
The package weighs just 3.4 pounds and the company offer five years warranty.
Highlighted Features:
- Premium grade aluminum metal bars
- Rubber grips for a slip-free grip
- Rust and corrosion resistance
- No need for drilling or welding. Fits in OEM holes
- Five years manufacturer warranty
14. Hooke Road Grab Bar Front Grab Handle for 2007-2018 Jeep JK Wrangler & Unlimited
Most of us will urge to have a safety grip bar that does not require tedious works such as drilling, fitting, or welding. If you fall into this category, this one is for you.
The Hooke Road Grab bar is ergonomically designed, durable, and has high strength. It fits directly in the existing holes of your jeep (2007-2018) which means it eliminates the extra work.
You can use this bar effectively for entering or exiting the jeep. It is rugged and builds to take extreme weight pressure.
This front bar will fit directly into the original equipment manufacturer (OEM) holes of your vehicle. Note that these are front handlebars you must expect specific obstruction to the sun visors from extending entirely to the windshield.
But you can pull the visors towards you to block the sun glare. The bars weigh 5.3 pounds, and the package includes 2 x Hooke Road Jeep Wrangler GraBars handles, 2 x long bolts with spacers, 2 x short bolts with spacers.
The entire set has two years manufacturer warranty which is one of the great things of this company offers.
It supports wide variety of vehicles making it one of the best jeep grab bars. You can fit these bars to 2007-2018 Jeep Wrangler JK & Wrangler Unlimited; includes Rubicon, Sahara, Sports Models.
Highlighted Features:
- Fits directly in the OEM holes
- Superb quality and durability
- Can be installed on numerous vehicles
- Two-year manufacturer warranty
Things To Consider Before Buying Grab Handles
Before you install or fit these devices in your jeep, there are certain essential things which you must think. These things will help you in selecting the one which will aptly fit in your requirements.
Compatibility
The major point which people miss while selecting the grab bar is the compatibility. They check all other features such as its sturdiness, quality, the company, and other features but miss whether it is compatible with your jeep or not.
An ideal grab handle will perfectly fit in your jeep without affecting other activities, or it does not interfere with other things in your vehicle.
Make sure you select an appropriate size of the bar such that it can be installed quickly and also it does not obstruct other things such as view or hinder your sitting position.
Toughness
You don’t want a safety bar which will bend or break when you take its support (while getting in or out). The handle must be robust and sturdy enough to bear the force you apply on it.
Most of the bars can be bolted and welded to the jeep, but it does not imply that a welded handle offers more resistance than the bolted one.
The toughness of the safety bar depends on the quality of the material it is made of. Some might think that metallic bars are tougher than rest of the grab handles. No, even a high-end plastic material such as High-Density Polyethylene (HDPE) will offer as much resistance as the steel ones.
Consider such materials which are sturdy, durable and has long life span.
All-Weather Resistance
The grip handles must work throughout the year(s) in every season. It must have resistance to heat, corrosion, and extremely cold temperatures. One of the major problems faced by the devices under different climatic conditions is the formation of rust (for metallic bars).
Rusting will result in the reduction of the toughness and also affects the aesthetics. It may even break while you apply pressure on it.
Fiber reinforced safety bars or non-metallic ones are resistant to rust and will offer proper handling in most of the situations.
Similarly, your safety bar must not undergo drastic physical changes when subjected to heat and cold weather conditions. Such changes will also result in cracks and may eventually break.
>> Jeep Bumpers: Check Our Top 10 Items
>> Top Quality 120/240v Garage Heaters Lists
>> List of 10 Good Quality Truck Dash Cam
>> Top 10 High-Quality Coaxial Cable
>> Setup Top-Quality Cold Air Intake On Your Car
How to install grab handles on the jeep wrangler
Now that you know about some of the best jeep grab handles for jeep wrangler or other models, it is also essential to understand how to fit them on your jeep wrangler.
The installation procedure changes depending on the model you have purchased. All the companies provide installation instructions manual with their product.
The roll bar grab bars usually require strapping them around the bars of the jeep wrangler whereas the metallic or alloy bar handles can be installed by fitting them directly into the OEM holes.
Most of the safety bars will fit in the OEM holes while some require additional drilling or welding. Since the installation mechanism varies depending on the model of the handlebar, we will take an example of a few models and walk you through the procedure.
Note that the method may vary depending on other models, but the process is more or less the same.
Tools generally required for installation
- Socket & ratchet with extension
- Screwdriver
- Allen wrench
- Torx bit/driver
- Hole saw with a pilot bit and quality drill
- Dremel / die grinder & file
The dimensions of the tools vary depending on the type of bar you are installing and are given in the instruction manual. Follow them accordingly!
GENERAL NOTES:
It is helpful when installing the grab handles to remove the front hard top section or to fold back the front soft top part. The grab bar kit is a bolt-on installation, but you do have to trim some plastic interior trim
Installation of Front Solid Steel GraBar
Step 1:
Remove the (2)8mm bolts in the inside upper-corner of the windshield frame, using a 13mm socket and ratchet. Use caution when removing the side bolt as it can easily fall behind the plastic cover during removal. We back out the bolt most of the way, and then use a pair of needle nose vise grips to grab the bolt, and finish removing. (New pins are provided with your order)
Step 2:
Install the short 8mm bolt through the top hole of the handle, then through the short spacer. Tighten the bolt with the handle and spacer into the upper shaft of the windshield frame (Do not tighten. Only turn it in a couple of threads). Then place the long spacer onto the side hole of the windshield frame and add the long 8mm bolt through the handle, and through the long separator. Tighten the bolt until it’s almost tight. Now tighten the upper bolt and torque to 300 in-lbs. Using a 6mm hex wrench. Then tighten the side bolt to 300 in-lbs. Using a 6mm hex wrench. We use a short 3″ long hex wrench and stretch it as hard as you can.
NOTE:
Make sure you have the left handle for the left side and the right-handle for the right side. This is determined by the countersunk holes for the side bolts. Repeat steps 1& 2 for the other side
Installation instructions for handlebars which require drilling
- 1Remove the two vertical screws that attach the windshield visors. Use a Torx bit for removal.
- 2Remove the A-pillar trim. Remove the push pin fastener by unscrewing the center with a screwdriver, then pull the push pin out. Pull the retaining clip using a trim stick or equivalent tool.
- 3Remove the sidebar padding cover. Remove the lower sidebar bracket bolt in the windshield. Use a suitable socket to remove it.
- 4Test fit the grab handle to this hole using the factory bolt. Note, the grab handles are L & R specific. The angle bracket end of the grab handle attaches to the windshield, and the flat end connects to the windshield support bar with the J hook just in front of the hole for the soft top door surround. You will have to trim the windshield support bar padding to clear the handle and J hook.
- 5Mark a center hole on the upper A-pillar trim. Mark 2″ from the bottom lip, and 1-3/4″ from the outer edge and drill a 1-3/8″ hole in this location.
- 6Section the pillar from 1-1/4″ from the edge (center of the pillar).
- 7Slip the J-Hook side of the grab handle through the hole cut in step 5. Slip from the back/inside of the A-pillar trim.
- 8Install the grab handle and A-pillar trim simultaneously. Begin by bolting the grab handle to the windshield using the factory bolt removed in step 3. Do not fully tighten at this time, merely snug into position.
- 9Fasten A-pillar trim back to the vehicle by lining up the push-pin locations and pressing into position. Reinstall push-pin fastener and corresponding screw insert which was removed in step 2.
- 10Reinstall roll bar padding. Position J-hook in the approximate area of attachment just forward of the roll bar padding. Pull padding cover into position and slip handle through the opening for the soft top door surround.
- 11Attach grab handle to J-hook with the button head screw provided in the kit. Use appropriate Allen wrench and tighten it. Tighten factory windshield at this time as well. Zip up roll bar padding and tuck into factory position for a clean finished look.
That’s it! You are done installing the bar. Note that the amount of pressure (lbs) of the wrench will be given in the manual of your product. Also, make a note of the dimensions of the wrenches, screwdrivers, and other tools required for the installation.
Maintenance Instructions
- Periodically check and tighten all fasteners.
- Stripped, fractured, or bent bolts or nuts need to be replaced.
- Keep all surfaces free of dirt, road grime, and standing water to ensure finish longevity.
What is the top-rated best grab handle brands?
Most of us buy products by considering the brand. It is an obvious thing that brand value isn’t established in a moment. Continuous support to its customers, warranty, and sustenance in the market are what makes the brand, a brand.
Let us look some of the popular brands for the grab handles available in the market.
Hooke Road
Hooke Road is one of the renowned companies in the lane of jeep grab handles. It offers superior quality products which have at least two years manufacturer warranty.
Their products are designed to last all year long and in all weather conditions.
The handles are easy to install and will fit as many wrangler models as possible. There is no need for extra drilling or welding to fix them.
Danti
The company which is known to manufacture grab not only handles but also other accessories such as jeep antennas, jeep mats, oil filters, etc. is Danti.
It is known for providing wide range of products for automobiles (jeep wranglers), which are known for quality and durability.
You can look into their catalog, and you will know by yourself about their range of products.
Badass Motogear
A company focused on both function and looked is the Badass Motogear. The name itself indicates that how much they are focused on the ergonomics and quality.
They also manufacture other accessories such as backpacks, seat covers, ratchet straps, etc. All their products are known to last for a longer period.
On top of that, they offer a minimum five-year warranty on their list of products. You can check their product reviews on most online e-commerce sites and can conclude how good they are.
OxGord
No, it’s not a typo and neither it is Oxford. The OxGord makes its way to the top brands in our list due to their sheer quality of the products.
They produce other household products along with automotive parts. Their grab handles are industrial grade durable and offer superior grip and safety to the members in the vehicle.
Forget the warranty; if handled correctly they will last for more than a year (warranty which they offer).
AUTOSAVER88
Another top brand in our list which manufactures a wide range of vehicular accessories along with the grab handles is the Autosaver88.
Their products will grab your attention by their attractive looks. You will immediately notice their stylish design, and on top of it, they are durable.
You will not be disappointed with their products as they offer superb ergonomics.
Fullele
The final firm in our top brands’ list is the Fullele. They manufacture exclusively solid jeep grab handles and nothing else.
You will get a superior experience with enhanced security with their aero-grade industrial quality of handles. The good part is that their products are cheaper than others and you will get a lifetime warranty.
Frequently Asked Questions (FAQ)
Final Words
Jeep grab handles are highly efficient when it comes to safety. They will allow you to get in and out of the vehicles by their sturdy grip. This comprehensive guide might have helped you in selecting the best jeep grab handle.
These handles do not require much maintenance and will long last than them. Frequent inspection of the fitting, nuts, bolts and physical changes will help you to keep a check on any flaws if they occur.
Most of these grab handles will fit in the OEM holes while some require drilling and welding. If your grip requires drilling or welding make sure you have the necessary tools and safety equipment before starting the procedure.
Take precautions while handling and installing the grab handles, especially that require additional work to avoid any potential injuries. Follow the instructions manual while installing them. If you are unaware of the procedure, contact any professional or customer care of the company.
