12 Best Frost Free Sillcock for Use All Year Round
When winter is over and spring is here, one of the things you likely want to do is open your outdoor spigot and bring your garden back to life with water.
But imagine going to open it and nothing comes out, only to discover that the pipe has burst from inside. Then, upon going to your basement, you find that the place is flooded with water.
Not a good scenario, right?
But that’s what many people face, not knowing there’s a quick and lasting solution – installing the best frost free sillcock.
With this device, you’re able to keep the shut off point far from the freezing temperatures outside. That keeps the water from freezing and the pipes from bursting. A good unit also allows you to draw water from your outdoor spigot during winter and throughout the year.
To help you avoid the confusion from all the sellers and models on the market, we have complied a review of the best models worth considering.
Go through our review below and see which frost proof sillcock suits your needs.
5 out of 5
5 out of 5
4.5 out of 5
5 out of 5
4.5 out of 5
Things to Consider Before Buying Frost Free Sillcock
Like other products on the market, frost free sillcocks come in many varieties, which makes choosing a bit confusing for the buyer. When shopping, here are a few factors to consider to ensure you get what you need:
Frostfree sillcocks are available in a range of sizes. There are three sizes to look at – length of inlet pipe, which should go with the thickness of the wall where the installation will take place, diameter of inlet pipe, and diameter of outlet/spout.
Ideally, frost free hose bibs are to stand some of the worst weather.
They should be strong and resistant to cracking and at the same time corrosion-resistant. Strong materials like die cast aluminum, steel, and stainless steel, offer these benefits. The sturdiness of the material also determines the longevity.
Ease of use is one of the most important qualities to think about when shopping for good frost free sillcock.
The handle should be easy and convenient to turn. And, it should have a smooth surface that doesn’t give you blisters. Consider also the number of turns it takes to go from completely on to off and vice-versa.
Ease of installation
Most units require glue or soldering to install.
But some better units, such as those from Sharkbite, are push to fit, making the installation not only quick but also super fast and reducing the number of tools needed for the installation.
How much water pressure can the unit withstand? A good sillcock should be able to handle at least 120 psi.
The higher the pressure rating, the better.
Let’s now jump in and see what hose bibs we have in the review.
Our Top 12 Best Frost Free Sillcock Reviews In 2020
1. Everflow 6212P-NL Sillcock
When searching for the great-quality frost free sillcock, the material matters a lot because it determines not only the appearance but also the longevity.
Made from brass, the Everflow 6212P-NL Sillcock is not only strong and durable but also pleasing to the eye.
Corrosion is one of the major problems that many people face in relation to water faucets and pipes. Rust accumulating on your sillcock, it not only takes away the beauty but also makes the sillcock more susceptible to bursting from pressure in case of freezing or blockage.
But when using the Everflow 6212P-NL Sillcock, rust is not something you have to be very worried about. The brass body and chrome plating ensures the unit is well protected from the agents of rusting.
Talking about water pressure, the unit is rated 150 psi. Considering most homes run water at a pressure of 80 psi, 150 psi allowance is quite something. It’s an assurance that if the pressure increases, your sillcock will not burst.
We loved how easy it was to operate the hose bib. With a large valve handle made of plastic, the hose bib is super easy to turn of and off. The handle is also quite stable, such that adjusting the water to different flow levels is a piece of cake.
Another awesome aspect pertaining to this product is versatility. Buying from amazon, you get to choose your preferred length between 4 and 14 inches.
We didn’t like the appearance of the unit, but the fact that it does what it’s meant to do – keep your outdoor water running in freezing temperatures, is more than enough to make it a worthy buy.
2. SharkBite 24628LFA Frost Free Sillcock
A good number of homeowners agree that the SharkBite 24628LFA Frost Free Sillcock is the best frost free sillcock out there. Is it?
First off, this is the most appropriate hose bib for those of you who hate difficult or time-consuming installation tasks. You can literally install this one in seconds. How?
With most sillcocks, you have to use heat and solder to connect the unit to the pipe bringing the water from the inside. This sillcock is different, as it requires no soldering.
The connection point is crafted such that you just have to push the unit into the pipe, and the connection is created. And we’re not talking about a leaky connection. It’s a water-tight seal that works just as good as the soldered points.
That also means one thing – you don’t need any special tools or solder or glue. This product, therefore, offers you one of the cheapest ways of enjoying running water outside your house during winter (and all year long, of course).
When it comes to performance, this is also virtually the best unit you can have. In that regard, the sillcock is able to withstand pressures of up to 200 psi. No matter how strongly the water comes, you’re assured that your hose bib will not get damaged.
Talking of sturdiness, the SharkBite 24628LFA Frost Free Sillcock is among the strongest units out there. It stands up to the harsh times and not water pressure or corrosion is enough to push it down.
What we loved about this unit is that apart from being strong and durable, going strongly for years, it’s also very good-looking. It features a shiny silver body and a blue valve handle. The whole design and appearance is awesome; something you’ll be proud to see coming from your house.
The unit also offers you size versatility. Choose from 5 different lengths between 8 and 18 inches.
3. Prier P-164D12 Frost Free Anti-Siphon Outdoor Hydrant
If you’re looking for a combination of easy operation and elegant design, the Prier P-164D12 Frost Free Anti-Siphon Outdoor Hydrant could be the right pick.
This is a 12-inch unit that is a perfect selection if you have to bore through a thick material to reach the pipe on the inside.
When looking for a spigot for outdoor water supply, ease of use is one factor you shouldn’t compromise on. And it’s one of the factors that first pulled our attention toward the Prier P-164D12 Frost Free Anti-Siphon Outdoor Hydrant.
With a rubberized handle, its operation is seamless. Forget those cold and hard valve handles that are such a pain to use. Being rubberized, this one is not only soft to hold but also insulated, meaning you won’t feel like you’re holding on ice during the cold days/nights.
Another factor that makes the unit easy to use is that the handle is a little larger than normal. So, you only need to apply a little force to get the water opened or shut.
Furthermore, it’s a quarter-turn mechanism, so getting the water following or to stop is a breeze.
Back-flow is something most of us don’t want in our home water relay pipes, to avoid contamination. The good news is that the Prier unit is designed with backflow prevention.
Inside, it contains an anti-backflow vacuum breaker, which prevents the water from getting back-siphoned.
Looking to create a solid connection with your garden hose? You’ll be able to do that as the spout is designed with 5 full hose threads. These hold your hose firmly.
4. SharkBite 24632LF 45-degree Hose Bib
Maybe you’re looking for a spigot for outdoor water supply that necessarily have a tube at the back. In that case, we’d encourage you to choose the SharkBite 24632LF 45-degree Hose Bib.
If you’re on a budget and need something high-quality, this would be the perfect selection. It’s not only made of high-grade materials but also easy to install.
The unit is a ½-inch by ¾-inch hose bib. That means that at the back, you can connect a ½-inch pipe coming from within your house, and at the front, you can connect a ¾-inch hose to supply water outside.
One amazing thing about it all is the ease of use.
At the back, you don’t have to do any soldering or even to apply glue. If you’re using a 1/2-inch pipe, then all you need to do is push it in. The unit is designed to hold on the inserted pipe firmly, creating a secure watertight seal.
And at the front, the spigot has a threaded spout. If you ever used another unit that kept letting go of the connected hose, you can now say goodbye to that problem. This one will hold the hose and prevent leakage or water wastage.
Performance with regards to water pressure is another area in which this unit is a victor. Designed to handle up to 200 psi and 200 degrees Fahrenheit, the spigot keeps your water supply safe and leak-free in event of high pressure or temperature.
The only issue with this unit is that the interior orifice is small, thus restricting the water-flow a bit.
All in all, this spigot is durable and it works flawlessly. And did we mention that the handle design is brilliant? Say goodbye to blisters.
5. Everflow Supplies 6206-NL Frost Free Sillcock
When considering strength and versatility, few units are as good as the Everflow Supplies 6206-NL Frost Free Sillcock.
If you purchase it from amazon, you have 6 sizes to choose from. You can go for the 4-inch, 6-inch, 8-inch, 10-inch, 12-inch, or 14-inch version. That right there is lots of freedom, allowing you to get the right size for your wall’s thickness.
As mentioned, the unit is superior when it comes to strength. Made of a brass body, it is able to withstand not only high pressure but also high temperature.
With it, you can safely run water with pressures of up to 150 psi. No risk of breaking or bursting.
Another thing that the unit is safe from is corrosion. The chrome plating on it wards off elements of rusting and corrosion effectively.
There are two issues you need to know about the design. First, there are no other color options for the handle, which is black. We thought the color combination of a black handle and a silver body looks a little dull. But, it’s all a matter of preference and maybe the color will work for you.
Secondly, there seems to be a problem with the manufacturer’s description regarding the size. Apparently, the tube is a bit shorter than the description says – by about 0.5 inches to an inch.
Other than that, the unit works well and most of those using it are very pleased. It’s easy to turn – needs two turns to go from completely open to completely closed. Also, it’s relatively easy to install though it needs soldering.
6. GripWerks P212-8-12 Push-Fit Sillcock
Looking for a good, versatile, and easy to install spigot for supplying water outside your house? The GripWerks P212-8-12 Push-Fit Sillcock could be just what you need.
This is a half-inch multi-turn spigot that many homeowners love. At the back, the unit connects to 1/2-inch tubing. The best part is the versatility it comes with. You can connect PEX, copper, and other pipe materials.
Another awesome thing about this one is the ease of installation. Most units require soldering or gluing to prevent leaks; not this one. The GripWerks sillcock is a push to fit model, meaning you only need to push it, without having to burn any solder onto the connection point or apply glue.
If you’re a person who hates difficult and time consuming DIY tasks, this unit is for you.
There’s one negative thing about it, however. If you know Sharkbite fittings, you know they’re some of the most popular push to fit models. They come with a plastic push to release ring that makes removal as easy as the installation.
The issue with GripWerks fittings is that they lack the ring, thereby making the removal a hassle. You’ll have to utilize two wrenches to release the joint at the base. In the process, you might render the push to fit part unusable, making reuse hectic.
But since the sillcock is meant to be connected permanently, that’s not a problem that should worry you, right?
Apart from that issue, the unit performs excellently and has a sturdy, long-lasting body. We also like the design and the combination of the gold body and blue handle.
7. Woodford Freezeless Model 17 Wall Faucet
For a fancy unit, the Woodford Freezeless Model 17 Wall Faucet would be a great selection. But it’s not fanciness that makes this unit worth it.
It is rather the fact that it works great and holds up really well, keeping your exterior water running year-round regardless of the temperature fluctuations.
Strength is the factor that makes this unit better than the rest. The handle is one of the moving parts on a sillcock, and thus, its strength matters. Made of die cast aluminum, the handle on this one is super strong.
The handle is further coated with powder to keep rust at bay. If you want a strong, corrosion-free handle that will look great for years, this unit suits you.
Other parts of the spigot are also made of steel, with some stainless steel parts, such as the nozzle, for added resilience.
What about the size, you ask? The pipe is 12¼ inches long, with a 7/8-inch connection spot for the PEX. This is the sort of size that works for those with a thick wall.
Versatility of installation is another factor that you get to enjoy when using this unit. You can screw it to your house no matter the material – wood, stone, brick, or anything else. The spigot seems to work well with almost any house material and the notched flange helps too.
Want something that is easy to install?
This one is for you. The PEX connection/nipple makes the installation a piece of cake. Put on a stainless steel clamp on the connection to make it tight and leak-proof.
And yes, the unit comes with a ½-inch PEX fitting already installed, which is a plus, making it super easy to replace the existing hose bib.
For a durable, easy to install, leak-proof spigot that is made in the USA from quality materials, the Woodford Freezeless Model 17 Wall Faucet would be best frost free sillcock for the money. Go for it.
8. Woodford Horizontal Freezeless Faucet
Want to have hot and cold water outside your house? The Woodford Horizontal Freezeless Faucet is here to make that happen.
If you’ve ever had problems with units that relay hot/cold water through the same pipe, you can say goodbye to such problems. Designed with two separate relay pipes and handles cold and hot water separately in an efficient manner.
With this unique setup, you can now wash cars and toys and water your garden, and even wash your pets from the same source no matter the weather.
Got a thick wall? This unit could be suitable for you. The distance from the flange to the end of the fittings is 13 and 3/4 inches, so you can install it on a wall that is up to 12 inches thick.
In the event that a hose is left on and the temperature is at freeing points, there’s a risk of bursting. But not when using the Woodford Horizontal Freezeless Faucet. With its patented pressure relief valves, the unit is able to reduce the pressure and prevent bursting.
Thanks to the sturdy materials used to construct this unit, strength and durability are well catered for. The body is made of steel while the handle is made of cast aluminum.
The powder coating on the unit prevents corrosion, so you can expect your spigot to keep looking good for a while.
There’s one issue you have to keep in mind before purchasing, though it’s not a deal breaker. The unit doesn’t come with mounting hardware.
Thus, you need to get bolts and nuts separately. Other than that, the sillcock works great and is easy to use.
9. Quarter Ball QB-114MC
As you might already know, when you ask us to include specific products in our reviews, to help you understand them better and give recommendations, then we do.
So, you asked us to include the Quarter Ball QB-114MC, and here it is. Do we think it’s a great frost free sillcock? Yes we do. Do we think it’s worth buying? No we don’t, and we’ll show you why.
Let’s first see what the product is about and explore some of its good features.
The first good feature is the size. For those with a thick wall, a sillcock with a short pipe at the back doesn’t work; you need something long.
Now, the Quarter Ball QB-114MC has a 14-inch long pipe, which is perfect for thicker walls.
The second benefit of this unit is ease of use. For instance, the handle is so easy to operate. It is designed in a way that is conforms to your fingers, making operation effortless. Furthermore, going from completely on to off and vice-versa is fast and simple. You only need to make a quarter turn.
Another factor that makes the unit easy to use and convenient is the fact that the spout is threaded. When you connect a hose to the male spout, you can be use the threads will hold it firmly with no leakage.
Something else you’re possibly going to love is the construction. The unit is made of brass and coated with powder for corrosion protection. Again, it uses a solid brass ball for the valve, which prevents leaks while keeping the flow efficient.
Great features, right? So why don’t we think it’s worth it? First, because Everflow offers a sillcock that is almost the same in design for about half the price. And secondly, because we gathered that the unit contains lead, which is a dangerous chemical.
As to whether the claims are true, we’re not sure, but we’d not advise you to take any chances with your health.
10. Woodford Hot/Cold Vertical Mount Faucet
Maybe you liked the Woodford hot/cold sillcock we talked about earlier but would prefer it being vertical. In that case, why don’t you go for the Woodford Hot/Cold Vertical Mount Faucet?
This one is just like the horizontal version, with a few minor differences such as the orientation.
The first feature that makes this unit worth buying is the nice temperature control. You’re able to draw hot or cold water from the same spout.
As the unit comes with two knobs, switching between hot and cold water is a piece of cake.
The two knobs are even labeled to avoid confusion. The red upper one is labeled H for hot, and the blue lower one is labeled C for cold.
You will likely love the design of the knobs. Both have a smooth edge with ridge elements to make turning easy and convenient.
One thing you should definitely consider when shopping for an outdoor frost free sillcock is the construction of the product. Thankfully, this one features a solid metal construction. The handles, however, are made of plastic although it is hard plastic that lasts.
We have to say, though, that we didn’t like the general design and color or the unit. Perhaps you’ll see things differently.
The inlets are 11 and ¾ inches long from the flange to the tip. That places the shut off valve far enough to prevent freezing during the cold weather and makes installation on thick walls possible.
11. Mueller Industries 108-054HN
If you live in the north, where the weather is very chilly, you need a hose bib that stands up well to the cold. The Mueller Industries 108-054HN spigot is designed for just that.
Apart from looking great, this spigot is build for the tough times. Its chrome-plated brass body is strong, making the unit able to withstand extreme temperature conditions without the risk of cracking or bursting.
Because of the unit’s strong body, you can run pressures of up to 125 psi.
As you’ll see, this unit is very budget-friendly. Even though it doesn’t come with an inlet pipe, the spigot is still low-priced.
When it comes to design, the Mueller Industries 108-054HN spigot is one of the finest units. It features a tough material from the handle to the body, and you can depend on it to last. The only problem we found is that the finish seems to come of rather quickly, leaving the spigot exposed to rust elements.
On a more positive note, the handle is very well designed. When it comes to ease of turning, there’s virtually nothing better out there. If you’re tired of blisters, you got to try this one.
With a turn of 90 degrees, or what is called a quarter turn, you get to go from completely on to completely off and vice-versa.
Another good feature we found is the notched flange, which makes the installation easy.
You’ll also likely love the threaded spout, which makes a firm connection with a hose possible.
12. B & K/MUELLER INDS 104-517
Perhaps you’re looking for something that will look great on your home. When it comes to elegance, the B & K/MUELLER INDS 104-517 is one of the finest options. The brass body and red handle look fabulous and elegantly glossy.
One thing we liked about the unit is that it’s not just good-looking; it’s also strong and durable.
Let’s first look at the design. The unit features a 10-inch pipe with a ½-inch diameter. It’s a male pipe with the threads on the outside, so it is ordinarily meant to be installed in a female.
If you hate spigots that are difficult to install, this one is for you, as the installation is quite straightforward. There are two options for the installation. You could use a female threaded adapter on the outside. Alternatively, you can solder a pipe inside the threaded end.
What makes the ease of installation even better is the fact that the unit features a notched flange design.
Don’t forget to take out the valve before soldering to avoid damaging it with heat.
And now for the drawbacks. The B & K/MUELLER spigot has a good number of negative reviews, which are based on the fact that most units develop a leak at the handle. On the brighter side, disassembling and fixing the unit is super easy.
Besides, the unit comes with a lifetime warranty and again, the customer support is very responsive. Many users have attested to receiving replacement parts free of charge and without much hassle.
Of course, that’s not a reason enough to get the unit, but keeping in mind that it’s also very cheap, you might want to consider getting it if you’re on a budget.
Benefits of Using Frost Free Sillcock
When winter is over and the days gets brighter and warmer, most of us love to hook up the garden hose and bring the garden back to life with some water.
But nothing is more annoying that turning on the spigot and finding that it’s not working. What is even more frustrating is to go to the basement and find that the entire area is flooded from a burst pipe.
But if you have the best frost free sillcock, these are not issues you have to worry about. The benefits of a good unit include:
Frequently Asked Questions About Frost Free Sillcock
What is a frost free Sillcock?
A long stem or inlet pipe is what makes a sillcock frost free. Thus, a frost free sillcock is an outdoor hose bib with an inlet pipe of at least 6 inches. Some models are up to 14 inches long.
How do you measure the length of a frost free sillcock?
The length of a frost free sillcock matters because it determines how far away the shut off valve is from the freezing temperatures outside. It’s usually measured from the flange to the tip of the inlet pipe.
How does a frost free hose bib work?
A frost free hose bib places the shut off valve way inside the house where the temperatures are warmer, thereby preventing the water from freezing. Any water in the outer part of the pipe drains to the outside, leaving none in there, so there’s nothing to freeze.
Why are frost proof sillcocks useful?
If you live in an area where the temperatures drop to freezing points, then you probably know that water freezing in the pipes can cause the pipes to crack or burst. That’s a result of the pressure that the frozen water exerts.
Frost free sillcocks ensure there’s no still water in the very cold part of the pipes, thereby preventing freezing and subsequent bursting of pipes.
Must I turn off the water outside during winter?
No, you don’t have to. If you’re using a frost proof sillcock, then you can safely keep the water on all year round. However, after using the water, be sure to engage the shut off from inside the house and disconnect the hose. Also, ensure you’ve drained any water remaining in the outer portion of the pipe feeding the spigot.
At what temperatures do outdoor faucets freeze?
Around 20 °F. When temperatures drop to 20 degrees and below, the still water in the faucet/pipes will start freezing.
Why do I need to disconnect the hose during winter?
No matter what faucet or sillcock you’re using, it is advisable to disconnect the hose after use. That’s because there could be water in the hose, which might flow back and freeze in the faucet/pipes, causing them to burst.
Is it difficult to install a frost free faucet?
The installation of a frost free pipe is totally a DIY task. Some models, such as the ones from Sharkbite, are push to install, making the process very easy.
If there’s no hole for the pipe, you need to drill one through your house’s wall. Also, unless you’re using a push to fit model, you’ll need to do some soldering or apply glue or a strong hose clamp to create a water-tight seal at the point of connection.
If you live in a place where cold weather presents the risk of bursting pipes, then a good frost proof sillcock is a must-have item. We hope our review and buying guide have pointed you in the right direction.
Our recommendation for the best frost free sillcock is the SharkBite 24628LFA Frost Free Sillcock, which we’ve reviewed above. It offers you optimal functionality at a reasonable price. And being push to fit, it makes the installation a piece of cake.